*

This is the layout of QLogitechMediaServer which can be found in the
.qpkg/QLogitechMediaServer directory.
Logonon by ssh shell, and do [ cd /share/*/.qpkg/QLogitechMediaServer ],
this should bring you to the right directory !
You could set several option if needed, but be careful, it could make
lms crash.
On error just deleted en restarted QLogitechMediaserver, a new default
one will be installed !

###################################### QlogitechMediaServer config file 
###############################################

#  # on the front, will deactived the option, or use default !
#  For these 0/1                  (default)     [ Set to 1 will
activated, 0 or # in front will deactived option. ]

# Update settings !

#NOUPDATE=0                     # (0)           [ When set only manuel
update can be done, or UPDATE=/NIGHTLY= ?.?.? will trigger a update ! ]
UPDATE=1                        # (1)           [ Will check on official
update on every startup, 0 will disable it. ]
NIGHTLY=1                       # (1)           [ Check on NIGHTLY
update on every startup, 0 will disable it. ]
NOMAJOR=0                       # (0)           [ When set NIGHTLY wont
check a major level up. Example when set if RELEASE is 7.9.2, NIGHLY
will not check 8.0.0 ]

# Commandline options for LogitechMediaServer   [ Can also be set by
touch .(option) in LogitechMediaServer directory ! ]

#STDIO=0                        # (0)           [ Use standard in and
out as a command line interface to the server. ]
#NOUPNP=0                       # (0)           [ Don't be a UPNP
musicserver. ]
#DIAG=0                         # (0)           [ Use diagnostics, shows
more verbose errors. Also slows down library processing considerably. ]
#QUIET=1                        # (1)           [ Minimize the amount of
text output. ]
#NOSB1SLIMP3SYNC=1              # (0)           [ Disable support for
SliMP3s, SB1s and associated synchronization. ]
#NOTRANSCODING=0                # (0)           [ Disable transcoding
support. ]
#NOIMAGE=1                      # (0)           [ Disable scanning for
images. ]
#NOVIDEO=1                      # (0)           [ Disable scanning for
videos. ]
#NOMYSQUEEZEBOX=0               # (0)           [ Disable
mysqueezebox.com integration. Warning: This effectively disables all
music services provided by Logitech apps. ]
#NOBROWSECACHE=1                # (0)           [ Disable caching of
rendered browse pages. ]
#PERFMON=0                      # (0)           [ Enable internal server
performance monitoring. ]
#PERFWARN=0                     # (0)           [ Generate log messages
if internal tasks take longer than specified threshold. ]
#FAILSAFE=0                     # (0)           [ Don't load plugins. ]
#CHECKSTRING=0                  # (0)           [ Enable reloading of
changed string files for plugin development. ]
#LOCALFILE=0                    # (0)           [ Enable LocalFile
protocol handling for locally connected squeezelite service. ]

# CMD options set accoording value between"". Only use proper values,
otherwise LMS will crashs !
# Leaving it empty "" or # on the front, will deactived the option, or
use default ! ( Advanced users only ! )

#USER="squeezeboxserver"        # ( )           [ Specify the user that
server should run as. Empty, not exist or with leading #, the default
user will be squeezeboxserver ! ]
#GROUP=""                       #               [ Specify the group that
server should run as. Only usable if server is started as root. ]
#HTTPADDR=""                    #               [ Activate the web
interface on the specified ipadres. ( Leave empty for default host ip )
]
#HTTPPORT=""                    # ( 9001 )      [ Activate the web
interface on the specified port. ( Leave empty for default 9001 ) ]
#CLIPORT=""                     #               [ Activate the command
line interface TCP/IP interface on the specified port. Set to 0 in order
disable the command line interface server. ]
#CLIADDR=""                     #               [ Activate the command
line interface TCP/IP interface on the specified IP address. ]
#PLAYERADDR=""                  #               [ Specify the _server's_
IP address to use to connect to Slim players. ]
#PRIORITY=""                    # ( -10 )       [ Set value betwen High
-20 or Low 20. ( Leave empty for default -10 ) ]
#STREAMADDR=""                  #               [ Specify the _server's_
IP address to use to connect to streaming audio sources. ]
#CHARSET=""                     # ( utf8 )      [ Force a character set
to be used, eg. utf8 on Linux devices which don't have full utf8 locale
installed. ( Leave empty will uses utf8 LANG string ! ) ]
#PREFSDIR=""                    #               [ Set directory where
pref file will be stored, the directory must exist. If not or empty will
uses default ( SlimServer/prefs ) ! ]
#CACHEDIR=""                    #               [ Set directory for
cache, where cached file will be stored, the directory must exist. If
not or empty will uses default ( SlimServer/Cache ) ! ]
#LOGDIR=""                      #               [ Set directory for
logfile, where logs file will be stored, the directory must exist. If
not or empty will uses default ( SlimServer/Logs ) ! ]
#LMS_EXTRA=""                   #               [ Here you could add a
extra cli options for LMS. Be sure to uses proper options, otherwise LMS
could crashes ! ]

# System options ( Advanced users only ! )      [ If the service start,
please leave them ]

RENICE="-10"                    # ( -10 )       [ A value between -20 (
high prio ) and 20 ( low prio ), empty "" will deactivated it. ( QTS 4.2
or lower it can be added by optware ) ]
IONICE="-c 2 -n 3"              # (-c 2 -n 3)   [ System option to make
LMS aware of used and running resources. Very helpful on a server,
nassystem ! ]
#PERL=0                         # ( 0 )         [ If set will uses
lowest version perl included ! ]
#AUDIO=0                        # (   )         [ If set will use
suppled with QLogitechMediaServer, otherwise build from LMS if used ! ]
#PLYLSTDR=1                     # ( 1 )         [ Set writing rights on
PlayListDir if set and exist ! ]
#OLD=0                          # ( 0 )         [ Set on startup trouble
to fix owner/right issues ! Leave on 0/disabled, if all works fine ! ]
CLN_TEMPLATE=1                  # ( 1 )         [ Will cleanup the
SlimServer/Cache/templates on startup, to prevent audio drops on radio.
]
#CHROOT=0                       # ( 0 )         [ When set will not try
to uses start-stop-daemon to startup LMS ! ]
RECLAIM=1                       # ( 1 )         [ Flush all unused
caches & buffers, to free unused memory ! ]

# Plugin options

#GMUSIC=1                       # ( 0 )         [ To use the GoogleMusic
plugin from GIT ( developers ). ]
#GVERSION=""                    # (12.1.0)      [ Which version of
gmusicapi will be used, default #GVERSION="" is 12.1.0 . Set it to
GVERSION="", for the latest ! ]
#MUSICIP=1                      # ( 0 )         [ MusicMagicServer AKA
MusicIP server, needs Musicip plugin in LMS. ]

# Dont alter anything below here, for future use only ! ( Advanced users
only ! )

ARCHIVE=1                       # ( 1 )         [ When set, will keep
the latest 5 nightly and all official downloaded LMS build ! Can be
found in .qpkg/LogitechMediaServer/Backup ]
#TIMER=12:00                    #`(  )          [ If set will check on
update's, set between 00:01 and 23:59 ! Stops if a update is downloaded
]
#WEBSITE=""                     # ( http://downloads.slimdevices.com/ )
[ Only change this, when it's needed, Very important for future updates
! ]


*



*
maintainer of QLogitechMediaServer, QOptware-NG and QAutoSub.

Qnap TS-453a, with LogitechMediaSever 8.0.0 Nightly  ( with spotty,
youtube, Radio Paradise a.m. )
Several raspberry with hifiberry amp+ and picoreplayer.
Love logitechmediaserver for it flexibel way, to play music from
different sources.*
------------------------------------------------------------------------
digimaster's Profile: http://forums.slimdevices.com/member.php?userid=66919
View this thread: http://forums.slimdevices.com/showthread.php?t=108702

_______________________________________________
Squeezecenter mailing list
[email protected]
http://lists.slimdevices.com/mailman/listinfo/squeezecenter

Reply via email to