col996s - There is no equivalent for the Pi (a LinuxOS based system) for the Windows Control Panel application. There are no "tabs" to be seen.
Typically one starts/stops LMS from a command line terminal. Or, if one has used a product like piCorePlayer or Max2Play (both created for Raspberry Pis) one uses the webpage those systems provide to start/stop LMS. For example, I use pi/CorePlayer on my rPi3. To start/stop LMS I run a web browser and I go to the piCorePlayer UI at http://192.168.1.67 (<-- not 192.168.1.67:9000) and the piCorePlayer webpage loads on which is an LMS section with buttons I use to start/stop LMS. Back when I ran LMS on a Linux desktop, I'd use a terminal application to run the installed init script to start/stop LMS. Hope this helps. -- “Happiness is the meaning and the purpose of life, the whole aim and end of human existence.” ― Aristotle On Fri, Nov 27, 2020 at 12:08 PM col996s < [email protected]> wrote: > > The problem I have when I run lms on a pc can see all the tabs. Not sure > how to view the tabs on the pi. Can only see the Web page using ip > address:9000 on my laptop. > > > ------------------------------------------------------------------------ > col996s's Profile: http://forums.slimdevices.com/member.php?userid=60495 > View this thread: http://forums.slimdevices.com/showthread.php?t=113317 > > _______________________________________________ > Squeezecenter mailing list > [email protected] > http://lists.slimdevices.com/mailman/listinfo/squeezecenter >
_______________________________________________ Squeezecenter mailing list [email protected] http://lists.slimdevices.com/mailman/listinfo/squeezecenter
