Hi, all
I'm trying to run mrtg-2.5.4b to monitor our cache, but some errors are
returning from mrtg, and I don't know where to start to fix them. See:
I have compiled squid-2.1.PATCH2 with --enable-snmp and I configured
squid.conf as well the FAQ says. I also have applied the squid patch to mrtg and
defined port 3401 in mrtg.conf as follows:
Target[httpsvc]: cacheHttpAllSvcTimeFiveMin&cacheHttpAllSvcTimeFiveMi
n:[EMAIL PROTECTED]:3401
Every line where there is a [EMAIL PROTECTED], I put the :3401 entry.
Squid stars so smootly, everything goes ok...:
.
.
.
1999/01/14 16:11:44| Accepting HTTP connections on port 3128, FD 6.
1999/01/14 16:11:44| Accepting HTTP connections on port 3128, FD 6.
1999/01/14 16:11:44| Accepting ICP messages on port 3130, FD 15.
1999/01/14 16:11:44| Accepting SNMP messages on port 3401, FD 16.
1999/01/14 16:11:44| Ready to serve requests.
But, when I try to start mrtg (it is (will be) running just to monitor
the cache), a lot of the following block lines return to me:
(Sorry... I must put xxx.xxx.xxx and 000.000.000.00 to the machine's
name and IP address.)
SNMPv1_Session (remote host: "xxx.xxx.xxx" [000.000.000.00].3401
community: "public"
request ID: 327354413
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPGET: Failed to reach target: "cacheICPpktsSent&cacheICPpktsSent:public@
xxx.xxx.xxx:3401". I tried multiple times!
SNMP Error:
no response received
SNMPv1_Session (remote host: "xxx.xxx.xxx" [000.000.000.00].3401
community: "public"
request ID: 1400477190
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPGET: Failed to reach target: "cacheHttpInKb&cacheHttpInKb:public@
xxx.xxx.xxx:3401". I tried multiple times!
And, at the end, the line: Unknown SNMP var cacheServerOutKb.
Could anybody tell me what am I doing wrong or what I didn't do yet?
Thankyou your attention
Alexandre Almeida
