Hi guys. This is my last attempt before going to authenticated mode.
I searched all over the internet for a way to set up a "transparent squid" but until then the most I can get is an exhausted timeout when I go to an http. My environment is as follows. - Box squid 3.5.20 - pfSense as the default network gateway. - Desktop Windows or linux. - Only one network /24 I was able to make it work through this documentation: https://wiki.squid-cache.org/ConfigExamples/Intercept/LinuxRedirect However this environment requires that the client has configured the gateway ip address of the squid itself. It works. But that's not what I want. NOTE: NAT configuration will only work when used on the squid box. This is required to perform intercept accurately and securely. To intercept from a gateway machine and direct traffic at a separate squid box use policy routing. What I want is to make a rule in pfsense through policy routing, as it speaks in the documentation. I've tried several ways, but every time I try to access the http page it loads until the timeout expires. In doc it does not explain directly how to do this rule in pfsense. I tried through nat port forwarding and through rules in firewall setting in the squid server rule as gateway. But both do not work. I tried to take as base these two links, https://wiki.squid-cache.org/ConfigExamples/Intercept/IptablesPolicyRoute https://wiki.squid-cache.org/ConfigExamples/Intercept/PfPolicyRoute No firewall block It's some detail that's missing either in pfsense or squid. Please give me a light. Att, Antonio Emiliano LinkedIn: https://www.linkedin.com/in/antonioemiliano "Corra, coelho. Cave um buraco, esqueça o sol, E quando o trabalho finalmente acabar Não descanse, é hora de cavar outro."
_______________________________________________ squid-users mailing list email@example.com http://lists.squid-cache.org/listinfo/squid-users