On 2023-09-29 09:17, Fernando Giorgetti wrote:
Actually I am evaluating if Squid can be used to proxy Non-HTTP/TLS
data, as we have a restricted environment where Squid is currently the
only way to get out to the internet.
Yes, Squid can tunnel non-HTTP data, including TLS data.
The idea is that the client application will open a connection to a given
hostname and port (setting the SNI in the TLS options), considering that
the given hostname/port is the actual backend they're trying to reach.
Do you control the client application? If yes, then perhaps it can be
adjusted to support HTTP proxies? In other words, the client will send a
plain text HTTP CONNECT request to Squid and, upon receiving a 200
(Connection Established) response headers, will start using TLS with the
origin server. In this case, you do not need interception.
We can either try to use a fake hostname (defined in the /etc/hosts of the
tls client machine) which would actually point to Squid's IP
AFAICT, faking the IP address will not work without Squid source code
modifications because a non-intercepting Squid https_port will want to
terminate TLS -- such a port does not support blindly tunneling traffic.
or eventually
redirect traffic to the real destination into Squid using a DNAT rule.
I am not a DNAT expert, but this sounds like interception to me. Bugs
notwithstanding, Squid supports blind tunneling of intercepted TCP
connections (to their intended destination):
https_port X intercept ssl-bump ...
ssl_bump splice all
On a successful tunneling path, the above configuration does not care
whether the intercepted traffic is TLS and will not peek at TLS SNI, but
nothing in your requirements necessitates SNI knowledge AFAICT.
If Squid fails to establish a TCP connection to the intended destination
of the intercepted connection, then the situation becomes more complex:
Squid (with the above configuration) assumes that the client is speaking
TLS. Squid will attempt to bump the TLS client connection and send a
Squid-generated HTTP error response to the client. AFAIK, this bumping
and error sending attempt cannot be prevented in this case without Squid
source code modifications: Squid used to be able to terminate a
client-Squid connection instead of sending a Squid-generated HTTP error
response (by replacing the corresponding Squid error page contents with
a word "reset"). However, that feature was accidentally(?) dropped in
2002 commit 76cdc28 AFAICT.
HTH,
Alex.
But overall, it will be a 1:1 relationship, meaning, the https_port on Squid
would be used exclusively to this purpose of proxying from a given source
to a given destination.
That is why I was considering a reverse-proxy, but I had no luck with it
(actually
I was able to proxy HTTP/HTTPS, but not non-http).
Thank you again,
Fernando
On Thu, Sep 28, 2023 at 11:39 PM Alex Rousskov
<rouss...@measurement-factory.com
<mailto:rouss...@measurement-factory.com>> wrote:
On 2023-09-28 20:35, Fernando Giorgetti wrote:
> Do you have any recommendations on how I could have it done?
I am unable to confirm whether Squid can do what you want or provide
configuration recommendations because I do not yet know how your Squid
will receive traffic (e.g., an intercepting proxy or an explicit
forward
HTTP proxy), what traffic Squid will receive (e.g., TLS, plain HTTP,
something else), and what you want Squid to do with that traffic.
To make progress, I recommend describing the above details (for one
typical use case?) and then answering any followup questions.
Cheers,
Alex.
> When my tls client tries to reach the target through Squid, using
> a "ssl_bump splice", it seems like squid is trying to reach
itself in a
> loop.
>
> I have also tried including a peek first, but no luck.
>
> Thanks again for all suggestions.
>
> On Thu, Sep 28, 2023 at 7:23 PM Alex Rousskov wrote:
>
> On 2023-09-28 15:23, Fernando Giorgetti wrote:
>
> > Actually with the suggested blind passthrough, Squid would not
> handle
> > the TLS termination.
>
> Correct.
>
>
> > how will Squid know what the target is?
>
> In many cases, Squid can learn SNI by peeking at TLS ClientHello,
> without terminating TLS. Bugs notwithstanding, none of the
> configuration
> sketches I shared previously will do that though.
>
>
> HTH,
>
> Alex.
>
>
>
> > On Thu, Sep 28, 2023 at 1:02 PM Alex Rousskov wrote:
> >
> > On 2023-09-28 11:31, Fernando Giorgetti wrote:
> >
> > > And what should I do to let Squid use the SNI
defined by
> the TLS
> > client?
> >
> > What do you want Squid to use that SNI for?
> >
> > Alex.
> >
> >
> > > On Thu, Sep 28, 2023 at 11:51 AM Alex Rousskov wrote:
> > >
> > > On 2023-09-28 09:06, Fernando Giorgetti wrote:
> > > > Hi Matus, do you mean something like a DNAT
> (iptables) rule?
> > > > If so, I would say, it should work as well.
> > > >
> > > > But this is an environment I do not control,
and I have
> > been told
> > > to try
> > > > using an existing squid installation to proxy
> non-http/TLS
> > data
> > > through.
> > > >
> > > > I appreciate any guidance or recommendation.
> > >
> > >
> > > Bugs notwithstanding, Squid can blindly tunnel
intercepted
> > (at TCP port
> > > X) TCP traffic to its intended destination:
> > >
> > > https_port X intercept ssl-bump ...
> > > ssl_bump splice all
> > >
> > >
> > > Without interception, then Squid can only
tunnel stuff
> inside
> > HTTP
> > > CONNECT tunnels (for HTTP CONNECT requests
received at TCP
> > port Y):
> > >
> > > http_port Y ssl-bump ...
> > > ssl_bump splice all
> > >
> > >
> > > In both cases, Squid does not care about the
protocols
> that
> > tunneled
> > > traffic is using. It could be HTTP, HTTPS, TLS, or
> anything
> > else on top
> > > of TCP.
> > >
> > > Your ACLs may differ from "all" in the above
sketches,
> of course,
> > > but if
> > > traffic is not TLS, then you want an "ssl_bump
splice"
> rule that
> > > matches
> > > during SslBump step1. A rule with an "all" ACLs
is the
> > simplest example
> > > of that.
> > >
> > >
> > > HTH,
> > >
> > > Alex.
> > > P.S. I am getting an "Internal Server Error" when
> following
> > the haproxy
> > > link in the original question, so I cannot map what
> that page
> > says to
> > > the configurations above.
> > >
> > >
> > > > On Thu, Sep 28, 2023 at 3:41 AM Matus UHLAR -
> fantomas wrote:
> > > >
> > > > On 27.09.23 16:48, Fernando Giorgetti wrote:
> > > > >I would like to know if it is possible
to set up
> > Squid to
> > > perform
> > > > >TLS passthrough to a given backend,
relaying TLS
> > encrypted
> > > > >traffic to the backend, similarly to
what HAProxy
> > does below?
> > > > >
> > > >
> > >
> >
>
>https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough>> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough>>> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough>> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough>>>> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough>> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough>>> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough>> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough> <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough <https://www.haproxy.com/documentation/aloha/latest/security/tls/encryption-strategies/#tls-passthrough>>>>>
> > > > >
> > > > >I have tried a few different
configurations using
> > reverse
> > > proxy,
> > > > >or peek and splice, but I could not
make it
> work without
> > > providing
> > > > >a valid HTTP request or a CONNECT request.
> > > >
> > > > what's the difference between TCP
redirect and
> this?
> > > >
> > > > --
> > > > Matus UHLAR - fantomas,
uh...@fantomas.sk <mailto:uh...@fantomas.sk>
> <mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>>
> > <mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>
<mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>>>
> > > <mailto:uh...@fantomas.sk
<mailto:uh...@fantomas.sk> <mailto:uh...@fantomas.sk
<mailto:uh...@fantomas.sk>>
> <mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>
<mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>>>>
> > <mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>
<mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>>
> <mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>
<mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>>>
> > > <mailto:uh...@fantomas.sk
<mailto:uh...@fantomas.sk> <mailto:uh...@fantomas.sk
<mailto:uh...@fantomas.sk>>
> <mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>
<mailto:uh...@fantomas.sk <mailto:uh...@fantomas.sk>>>>>
> > > > ; http://www.fantomas.sk/
<http://www.fantomas.sk/>
> <http://www.fantomas.sk/ <http://www.fantomas.sk/>>
<http://www.fantomas.sk/ <http://www.fantomas.sk/>
> <http://www.fantomas.sk/ <http://www.fantomas.sk/>>>
> > <http://www.fantomas.sk/ <http://www.fantomas.sk/>
<http://www.fantomas.sk/ <http://www.fantomas.sk/>>
> <http://www.fantomas.sk/ <http://www.fantomas.sk/>
<http://www.fantomas.sk/ <http://www.fantomas.sk/>>>>
> > > <http://www.fantomas.sk/
<http://www.fantomas.sk/> <http://www.fantomas.sk/
<http://www.fantomas.sk/>>
> <http://www.fantomas.sk/ <http://www.fantomas.sk/>
<http://www.fantomas.sk/ <http://www.fantomas.sk/>>>
> > <http://www.fantomas.sk/ <http://www.fantomas.sk/>
<http://www.fantomas.sk/ <http://www.fantomas.sk/>>
> <http://www.fantomas.sk/ <http://www.fantomas.sk/>
<http://www.fantomas.sk/ <http://www.fantomas.sk/>>>>>
> > > > Warning: I wish NOT to receive e-mail
> advertising to this
> > > address.
> > > > Varovanie: na tuto adresu chcem NEDOSTAVAT
> akukolvek
> > reklamnu
> > > postu.
> > > > Depression is merely anger without
enthusiasm.
> > > >
_______________________________________________
_______________________________________________
squid-users mailing list
squid-users@lists.squid-cache.org
https://lists.squid-cache.org/listinfo/squid-users
