if you are redirecting port 80 packets then you are running squid as a transparent cache. check is your proxy working fine as a transparent cache I mean to say entrys like that
httpd_accel_host virtual httpd_accel_port 80 httpd_accel_with_proxy on httpd_accel_uses_host_header on and one thing more what sh ip wccp webcache displaying mean to say can router getting cache or not yet I'm running wccp on FreeBSD and Red Hat Linux 7.1 it's going fine but I have patched kernel with module not as gre tunnel but my FreeBSD 4.7 running with GRE tunnle... if you find something more let me know Best Regs, Masood Ahmad Shah System Administrator Fibre Net Tel: +92-42-6677024 Mobile: +92-300-4277367 http://www.fibre.net.pk --- [EMAIL PROTECTED] wrote: > > Hi, > > I know that its now an old issue as how to > configure Wccp v1 with > squid. I myslef has done this many times in the > past. But this time i am > getting some strange issues. Here is my problem. > > 1: squid-2.5.STABLE1 > 2: Linux RedHat 6.0 > 3: IP_GRE.C path for this Linux Kernel, > 4: IPCHANS redirect www ---> 3128 (both GRE0 and > ETH0) > 5: Cisco Router with 12.x IOS > > Linux Kernel is recompiled with patched GRE > code. I have my gre0 > up, and i can see my webcache in router. TCPDUMP > also reports that i am > getting GRE packets. > IPCHAINS -L -v shows that i am receiving > packets both on gre0 and > eth0 interface and they are being redirected. > > But some or other how users are unable to > brows when ever i start > wccp in router. I am not sure but i believe there is > some thing wrong with > my squid conf as once ipchains shows that packets > are coming in and being > redirected it should work. I have tried the same > thing on BSD box and same > results. > > I know i am missing some thing here. Any > help to correct me here > will be highly appreciated. > > > Regards > Ahsan Saleem Khan > > __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/
