> Hi , > > I have a working squid 2.5 Stable 1 that using an internet connection > through eth0 card with a default route added to routing table . For some > reason I have setup a one way receive only sattelite DVB receiver and I > want to use this link for some IP classes . Then I used > tcp_outgoing_address . My network plan is like this : > > eth0 -> 81.12.18.2 81.12.18.10 > |-----------| |----------------------| > |-------------------------| | squid box |-------| Catalyst 2950 switch > |------| Broadlogic DVB Receiver |----( Sattelite Dish and LNB Receiver > ) <------- 62.112.164.192/255.255.255.192 |-----------| > |----------------------| |-------------------------| eth0:0 -> > 62.112.164.193 | > | > |----------------------| > | Cisco 2650 Router | 81.12.18.1 > |----------------------| > | > | > DSL Connection > > As you can see there two different classes the 81.12.18.0/24 is routed > through DSL connection from send and receive internet and > 62.112.164.192/255.255.255.192 is routed through DSL for sending packets > and receiving through DVB Receiver . So the Squid box have two > different IP address that each one from one of these classes . There is > a network card the I stored Secondary IP address on the interface . The > squid ip address is 81.12.18.2 is DSL class IP address and > 62.112.164.193 is DVB class IP address . I have tried pinging yahoo.com > on squid box with this command : ping yahoo.com , and all things well > cause sending and receiving is throgh DSL link . The I tried ping > yahoo.com with this command : ping -I 62.112.164.193 yahoo.com , and > also all things well cause sending is through DSL link and receiving is > through sattelite DVB receiver . As you can see there is no problem is > our DVB connection and network plan . After this I tried to configure > squid to use the sattelite connection for some specific address with > this configuration : > > acl specific_ips src 81.12.18.192/255.255.255.192 > tcp_outgoing_address 62.112.164.193 specific_ips > tcp_outgoing_address 81.12.18.2 > > Also the default route of the squid box is 81.12.18.1 and all sattelite > Ips are routed to squid box on Broadlogic . The problem is that the > normal IP addresses ( instead of specific_ips ) is working well through > normal DSL connection and IP address and nothing happened to them . But > the specific_ips that should use sattelite link is not working and no > webpage could browsed . I tried netstat and it shows that the > connection from source 62.112.164.193 to target host is tried to > established and added to netstat list . But there is no web browsing ! > Any idea ? > > -- > Regards > > ================================================================= > / Seyyed Hamid Reza / WINDOWS FOR NOW !! / > / Hashemi Golpayegani / Linux for future , FreeBSD for ever / > / Morva System Co. / ------------------------------------- / > / Network Administrator/ [EMAIL PROTECTED] , ICQ# : 42209876 / > ================================================================
Hi! i have the plan to implement the same scenario as you mentioned above(but couldnt get any time to do that) . I plan to put 2 eth cards in the squid box and assigning them 2 different IPs and gateways (eth0 and eth1). where as you are using eth0:0 . you can try this and plz let me know what ever the results would be as it will help me when i will be doing it. Regards, Mahmood Ahmed ultra.net.pk
