Hi

AFAIK,

you did not give the proper information of Access-list
and Group List

1.I feel , you did not added the access-list which should redirect the
traffic to cache Server
2. did you applied the access-list rule in the ethernet or wan interface to
redirect the traffic

hope above steps may solve the problem.

hare
----- Original Message -----
From: "Sukhjit Singh" <[EMAIL PROTECTED]>
To: "Henrik Nordstrom" <[EMAIL PROTECTED]>; "pauloric"
<[EMAIL PROTECTED]>
Cc: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
<[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>;
"MASOOD AHMAD" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]>
Sent: Monday, March 31, 2003 2:03 PM
Subject: [squid-users] squid+wccp+packets not being redirected


> Hi all
>
> Am facing some problem with packet redirection.
>
> My Setup is as following.
>
> --->Squid 2.5 Stable2
> ---->Kernel 2.4.19 patched with ip_wccp
> ----->using wccp v1 on cisco router 3660
>
> The cisco router is redirecting packets to the squid box, it is evindent
> from the result of the following command.
>
> Router#sh ip wccp web-cache
> Global WCCP information:
>     Router information:
>         Router Identifier:                   203.200.*.*
>         Protocol Version:                    1.0
>
>     Service Identifier: web-cache
>         Number of Cache Engines:                 1
>         Number of routers:                              1
>         Total Packets Redirected:                   149
>         Redirect access-list:                            11
>         Total Packets Denied Redirect:       100
>        Total Packets Unassigned:                    0
>         Group access-list:                               10
>         Total Messages Denied to Group:          0
>         Total Authentication failures:                   0
>
>
>
> ----->IP tables entry on the squid box is
> iptables -t nat -A PREROUTING -p tcp -s 0/0 --dport 80 -j
REDIRECT --to-port
> 3128
> and the result of the iptables -t nat -L -nv
>
> Chain PREROUTING (policy ACCEPT 9141 packets, 990K bytes)
>  pkts bytes target     prot opt in     out     source
> destination
>     0     0 REDIRECT   tcp  --  *      *       0.0.0.0/0
> 0.0.0.0/0          tcp dpt:80 redir ports 3128
>
> Chain POSTROUTING (policy ACCEPT 2 packets, 88 bytes)
>  pkts bytes target     prot opt in     out     source
> destination
>
> Chain OUTPUT (policy ACCEPT 2 packets, 88 bytes)
>  pkts bytes target     prot opt in     out     source
> destination
>
>
> This shows that no packets are being redirect to port 3128 if the router
is
> redirecting it to the cache.
>
> I would be really greatfull if any one could help me out with this.
>
>
> Regards
> Sukhjit Singh
>
>
>
>
>
>
>

Reply via email to