> -----Urspr�ngliche Nachricht-----
> Von: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
> Gesendet: Donnerstag, 13. November 2003 16:26
> An: Altrock, Jens
> Cc: 'Henrik Nordstrom'; '[EMAIL PROTECTED]'
> Betreff: Re: AW: AW: AW: AW: [squid-users] Group Authentication (NT4
> Domain)
>
>
> On Thu, 13 Nov 2003, Altrock, Jens wrote:
>
> > I can't even see the squid startup, I just see the last
> message, "aborted",
> > before the above shown error comes...
>
> And how are you starting Squid?
>
> HAve you tried starting it manually like indicated earlier?
> If you do this
> there is no way you do not see the Squid startup messages.
ok i'll try to explain that again:
I started squid manually as every time, but the ntlm_auth messages appear at
the startup, right after
the infos about squid starting, which I don't see (for they go up out of the
screen because that
ntlm_auth error appears about 10 times on the screen).
I start squid normally with
-N -d 1 -D
and, as you mentioned in a mail before, I did with
-DNYd3
too, but with the same result.
I should try and reinstall the whole system...
>
>
> Note: The errors you see from ntlm_auth is not the cause to
> your problems,
> only another symptom due to the problems. The problems you
> are having is
> more fundamental and prevents Squid from starting correcly.
>
So should i turn of the ntlm_auth? If it is just one of lots of problems...
> Regards
> Henrik
>
###########################################
Diese Nachricht wurde von F-Secure Anti-Virus gescannt.
This message has been scanned by F-Secure Anti-Virus.
