This is the command I used mrtg /var/www/mrtg/mrtg-squid.cfg 49,9
Is that how you meant for 49,9 to be used?
Below is the output in cache.log
2003/12/11 08:47:09| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 08:47:11| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 08:47:13| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 08:47:15| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 08:47:17| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 09:18:52| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 09:18:53| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 09:18:55| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 09:18:57| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 09:18:59| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 13:29:24| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 13:29:26| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 13:29:28| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 13:29:30| Failed SNMP agent query from : 127.0.0.1.
2003/12/11 13:29:32| Failed SNMP agent query from : 127.0.0.1.
Jim
Duane Wessels
<[EMAIL PROTECTED] To: Jim_Brouse/[EMAIL PROTECTED]
cache.org> cc: [EMAIL PROTECTED]
Subject: Re: [squid-users] Squid, snmp
and MRTG
12/11/2003
11:45 AM
On Thu, 11 Dec 2003 Jim_Brouse/[EMAIL PROTECTED] wrote:
> I am trying to configure Squid for snmp although when I execute mrtg
> pointing to my mrtg-squid.cfg I get a error "no response recieved".
>
> I am using the walkthrough contained on
> http://www.psychofx.com/chris/unix/mrtg/
>
>
>
>
> I have edited squid.conf and configured it for SNMP on port 3401 and have
> uncommented the following sections and squid stops and starts without
> errors.
>
> Since I have the acl snmppublic do I need to add my ip to the acl so that
I
> can query squid?
>
> snmp_port 3401
> acl snmppublic snmp_community public
> snmp_access allow snmppublic localhost
> snmp_incoming_address 0.0.0.0
> snmp_outgoing_address 255.255.255.255
Since you are using localhost, the above 'snmp_access' line should be fine.
You may want to add "49,9" to debug_options in squid.conf. Then watch
cache.log. That should show you if Squid is actually receiving the
SNMP queries, and whether or not they are allowed. You might also
want to use tcpdump/ethereal to look for SNMP packets.
Duane W.
