Hi Olivier, This quite curious as I have 8 vlans and use squid without issue -- however, I use a seperate instance of squid and dns for each :-)
eth0.10 --> gateway w/ squid eth0.11 --> gateway w/ squid eth0.12 --> gateway w/ squid eth1.1 --> lan 1 etc Users on lan 1 can access https with out any noticable problems ... Au Revoir Charles On Wed, 2004-01-21 at 16:01, PINEAU Olivier wrote: > Hi ! > > I want to inform you that i have discover a bug with 802.1Q technologie and > SQUID. > > 802.1Q is for VLAN's : > the module 8021Q is use to configure a network card to be present on > different VLAN's (tagged port). > > My previous installation was : > > VLAN 3 on eth0 > 10.0.0.0/255.254.0.0 > routeur SDSL (gateway) 10.0.0.1 > > VLAN 2 on eth0.2 (vconfig add eth0 2) > 10.20.0.0/255.255.0.0 > > VLAN 1 on eth0.1 (vconfig add eth0 1) > 10.10.0.0/255.255.0.0 > > With this configuration, i was ending weirds issues : i was not able to log > in hotmail, yahoo!mail, e-bay, or perform any transaction on net. > For exemple, with hotmail, the https transaction was done and recorded on > log, but the following url was not recorded in log and a basic error message > prompt on navigator (DNS error or serveur not found). > > By despair, I change my network conf to use a different networdk card for > each VLAN and it's finally works. > So, don't use 8021Q module with SQUID ! > > > NOTE : I use 8021Q for my data serveur (SAMBA and netatalk) and it works > fine > >
