Hi Henrik,
Another question is... Do I need specify domain + user +
password or only user + password.
Regards.
-----Original Message-----
From: Henrik Nordstrom [mailto:[EMAIL PROTECTED]
Sent: Thursday, February 19, 2004 11:13
To: Ampugnani, Fernando
Cc: Henrik Nordstrom; [EMAIL PROTECTED]
Subject: RE: [squid-users] Squid + MSAD.
On Thu, 19 Feb 2004, Ampugnani, Fernando wrote:
> I have been same test with squid_ldap_auth and
> squid_ldap_group. And I see that same part of squid_ldap_group line work
> properly (part that connect to LDAP and do the search), but I belive that
> when squid_ldap_group must send user and password there is same wrong,
> because take password as group.
Reading the question again.
No, the binddn and bindpassword is correct. You get a very annoying error
message when tese are wrong.
> Is the filter syntax correct?
Maybe, but it depends on what arguments you used for squid_ldap_auth.
If squid_ldap_auth is used in search mode then the exact same filter needs
to be specified as user filter to squid_ldap_group. See the -F option in
the manual.
Regards
Henrik
