But I guess users have different windows profiles.
So you can enable Webmin CA and issue certificates only to users allowed to
access webmin (wuth different system privileges, if you like ...).
Webmin gives a great deal of options for authentication (you can also use
Squid-like external autehtication).

Best regards

Antonio Manfreda
Easynet srl c/o Reale Mutua Assicurazioni
Ufficio Architettura Tecnica
Area Security
[EMAIL PROTECTED]
Tel. 011-431-2791


                                                                                       
                    
                      "Gareth"                                                         
                    
                      <[EMAIL PROTECTED]                Per:    <[EMAIL PROTECTED]>    
            
                      >                        Cc:                                     
                    
                                               Oggetto: Re: [squid-users] Blocking 
access to port 10000    
                      06/04/2004 15.21                                                 
                    
                                                                                       
                    
                                                                                       
                    


RE: [squid-users] Blocking access to port 10000We use Terminal Services, so
all users have the same IP address!

Gareth
----- Original Message -----
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED] ; [EMAIL PROTECTED]
Sent: Tuesday, April 06, 2004 1:48 PM
Subject: RE: [squid-users] Blocking access to port 10000


Use Webmin ACL's to define who can connect. Open up webmin with your web
browser and go to the webmin properties. You can specify ranges of IP
address or a single ip that will allow a connection.


Darwin L. Lambeth
Network Administrator
FPMI/Star Mountain
[EMAIL PROTECTED]
210-822-0770 EXT 246
FAX: 210-822-0785


-----Original Message-----
From: Gareth [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 06, 2004 7:41 AM
To: [EMAIL PROTECTED]
Subject: [squid-users] Blocking access to port 10000


Hi Guys
I've set-up Squid to block access to port 10000, to stop my users accessing
Webmin on our servers.
This works fine for external domains, like http://www.cnn.com:10000 - I'm
not suggesting Webmin is running on cnn.com, but just as an example.
This however doesn't work for http://server.ournetwork:10000 or
http://192.168.1.1 - even though our web browsers do not bypass Squid for
any resource.
squid.conf<snip>
acl webmin port 10000
http_access deny webmin
</snip>
Any suggestions?


Gareth


Ai sensi del Dlgs 196/2003 e successive modifiche/integrazioni si precisa
che le informazioni contenute nel presente messaggio, e negli eventuali
allegati, sono riservate e per uso esclusivo del destinatario. Pertanto �
vietata la copia, la diffusione e la rivelazione anche parziale dei dati in
esso contenuti alle persone non autorizzate dal medesimo. Chiunque lo
ricevesse per errore � pregato di restituirlo al mittente e di distruggere
il contenuto.





Reply via email to