On Wed, 1 Sep 2004, Eswari sharma wrote:
Hi everybody,
Download the entire package: http://www.squid-cache.org/WCCP-support/Linux/ip_wccp-1.6.tar.gz It includes a Makefile that should allow you to build on kernel 2.6.X
1. I downloaded the above tar package in Fedora core kernel 2.6 and kept in ip_wccp folder . 2. build the kernel2.6 with my requirements and save in .config file 3. from the kernel root installed the ip_wccp by giving the command "make install"
When using the tarball you shoud run make from the ip_wccp directory.
I got the given below errors and could not integrate ip_wccp with new kernel2.6.
These errors are plain kernel compilation errors with no relation to ip_wccp.
arch/i386/boot/bzImage System.map "" WARNING: Couldn't open directory /lib/modules/2.6.5-1.358custom: No such file or
This tells that you have not yet installed your custom kernel.
Before you compile ip_wccp you SHOULD compile, install and test your custom kernel as per the kernel instructions. Basically this down to
make config (or xconfig) make dep make clean make bzImage make modules make modules_install make install
then modify your bootloader configuration to boot your new custom kernel and reboot.
Then attempt to compile ip_wccp.
tar zxvf ip_wccp-1.6.tar.gz cd ip_wccp-1.6 make install
Please note that with Fedora Core 2 you don't need to build your custom kernel unless you need to change some kernel configuration parameters as all the required files is in /lib/modules/.../build (and automatically picked up by the ip_wccp tarball build process). I haven't verified if other Linux-2.6 based distributions is as friendly to compile custom modules.
Regards Henrik
