You refer to FAQ 4.8, don't you? It says it is current for version 2.2, we use 2.5. Well, there is a firewall but no parent proxy. Anyway, this doesn't explain to me why everything was working before. My problem just occured after I've put these ACLs into external files. I cannot find any differences to the former state unless those external files.
Thanks Schnoof -----Original Message----- From: Henrik Nordstrom [mailto:[EMAIL PROTECTED] Sent: Saturday, September 11, 2004 1:13 PM To: Schnoof Cc: [EMAIL PROTECTED] Subject: Re: [squid-users] Outsourcing of ACLs On Thu, 9 Sep 2004, Schnoof wrote: > For all addresses declarated in the ACLs it still works fine. But for those > which need the authentification I noticed a curious thing: The > authentification still works perfect. But whenever a user wants to send any > information to the site or change to a secure page, it doesn't work. Squid > tries for about three minutes (this was a thing of a few seconds before) and > afterwards the user gets a time-out screen. Are you behind a parent proxy firewall? If so don't forget to tell this little detail to Squid.. (see FAQ) Regards Henrik -- NEU: Bis zu 10 GB Speicher f�r e-mails & Dateien! 1 GB bereits bei GMX FreeMail http://www.gmx.net/de/go/mail
