Hi,
please keep repliese CC'd to the mailing list.
Abbas Salehi wrote:
I'm doing this ,but i have some problem,
1- shall i config the radius server to work with squid,
You will need to tell the RADIUS server about the machine squid is
running on.
3-what is the secret key,i should set the secret key in both of them,radius
and radius_auth.conf
You will need to select a 'secret' and configure squid_radius_auth with
the secret and your RADIUS server with the secret against the IP address
of the machine squid is running on.
2-how we can debug squid that work properly with this module
Check the log files, run a tcpdump or use ethereal - they should both
tell you what traffic is being generated and you should see whether the
request was successful or not.
Neil.
Regards
Abbas Salehi
----- Original Message -----
From: "Neil A. Hillard" <[EMAIL PROTECTED]>
To: "Abbas Salehi" <[EMAIL PROTECTED]>
Cc: <[email protected]>
Sent: Tuesday, July 12, 2005 12:21 PM
Subject: Re: [squid-users] Squid authentication with radius server
Hi,
Abbas Salehi wrote:
Can anyone help me
How we can config squid to authenticate with radius server,
The radius server is out of this server and it's separately Server,what
module should be used for authe program,if you have any guidance or any
external software ,could you please help me,
I've had RADIUS authentication working in the past, it's relatively
easy, you just need to compile up squid_radius_auth.
This was done using squid_radius_auth-106.tgz, it looks like 1.07 is out
now, available at:
http://www.squid-cache.org/contrib/squid_radius_auth/squid_radius_auth-1.07.tgz
squid.conf contains:
auth_param basic program /usr/local/squid25/libexec/squid_rad_auth
auth_param basic children 5
auth_param basic realm Restricted Access
auth_param basic credentialsttl 1 hours
/usr/local/squid25/etc/squid_rad_auth.conf contains:
server 192.168.1.1
secret sharedsecret
With 1.06 I had to change a hardcoded path in conf.h - SQUID_RAD_CONF
for the location of the configuration file - you may have to do this for
1.07, I'm not sure though.
Combine the with the usual squid ACLs and you should be OK.
HTH,
Neil.
--
Neil Hillard [EMAIL PROTECTED]
Westland Helicopters Ltd. http://www.whl.co.uk/
Disclaimer: This message does not necessarily reflect the
views of Westland Helicopters Ltd.
--
Neil Hillard [EMAIL PROTECTED]
Westland Helicopters Ltd. http://www.whl.co.uk/
Disclaimer: This message does not necessarily reflect the
views of Westland Helicopters Ltd.
