Hi Azfar Hashmi,
Azfar Hashmi wrote:
I am running squid on a 3ghz p4 processor with 1gb ddr ram. My max
simaltanous users are 250 and average 100. I have a 3.5mb circuit on
it. I have a 160GB SATAII harddrive on it.
My problem is i am getting huge delay with squid (5-10sec in each
request and some times more) on peak hours but if i bypass the squid
every thing is perfect and page complete in just 1 sec normaly.
For a bandwidth pipe of 3.5 mbps, your Squid box should be able to
support 250 users. By which means do you get you bandwidth?
Do you have large ACLs used for filtering in your Squid box? If yes,
then the problem of the huge delay could be attributed to your ACLs.
Posting your squid.conf might help? Which OS, firewall and version of
Squid are you using?
DNS could also be the culprit. Are you running a local caching nameserver?
I have defined 20GB in cache_dir.
I want to know with that hardware how many users squid can handle and
how much bandwidth it can handle?
Can you post us the output of the following 2 commands:
squidclient mgr:info
and
squidclient mgr:5min | grep client
Thanking you...
--
With best regards and good wishes,
Yours sincerely,
Tek Bahadur Limbu
System Administrator
(TAG/TDG Group)
Jwl Systems Department
Worldlink Communications Pvt. Ltd.
Jawalakhel, Nepal
http://www.wlink.com.np
