Hi again, before running this command pl make the mrtg working directory like "/var/www/mrtg"
Yes, I made it. pls see below [EMAIL PROTECTED] ~]# mkdir /var/www/mrtgnew after making the directory run this command cfgmaker --global 'WorkDir: /mrtg_working_dir_path/' --output /etc/mrtg/mrtg.cfg [EMAIL PROTECTED] yes , I did it. pls see below [EMAIL PROTECTED] ~]# cfgmaker --global 'WorkDir: /var/www/mrtgnew' --output /etc/mrtg/mrtgnew.cfg [EMAIL PROTECTED] It worked. then, I checked my /etc/mrtg/mrtgnew.cfg . it is a traditinal mrtg.cfg file. after running this make a entry in /etc/mrtg/mrtg.cfg LoadMIBs: /etc/squid/mib.txt Yes, I added it. this is my full /etc/mrtg/mrtgnew.cfg [EMAIL PROTECTED] mrtgnew]# cat /etc/mrtg/mrtgnew.cfg # Created by # /usr/bin/cfgmaker --global 'WorkDir: /var/www/mrtgnew' --output /etc/mrtg/mrtgnew.cfg [EMAIL PROTECTED] ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:\mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits EnableIPv6: no WorkDir: /var/www/mrtgnew LoadMIBs: /etc/squid/mib.txt ###################################################################### # System: mail.douglas.lk # Description: Linux mail.douglas.lk 2.6.9-55.EL #1 Fri Apr 20 16:35:59 EDT 2007 i686 # Contact: [EMAIL PROTECTED] # Location: Unknown ###################################################################### ### Interface 1 >> Descr: 'lo' | Name: '' | Ip: '127.0.0.1' | Eth: '' ### ### The following interface is commented out because: ### * it is a Software Loopback interface # # Target[localhost_1]: 1:[EMAIL PROTECTED]: # SetEnv[localhost_1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo" # MaxBytes[localhost_1]: 1250000 # Title[localhost_1]: Traffic Analysis for 1 -- mail.douglas.lk # PageTop[localhost_1]: <H1>Traffic Analysis for 1 -- mail.douglas.lk</H1> # <TABLE> # <TR><TD>System:</TD> <TD>mail.douglas.lk in Unknown</TD></TR> # <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> # <TR><TD>Description:</TD><TD>lo </TD></TR> # <TR><TD>ifType:</TD> <TD>softwareLoopback (24)</TD></TR> # <TR><TD>ifName:</TD> <TD></TD></TR> # <TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR> # <TR><TD>Ip:</TD> <TD>127.0.0.1 (localhost)</TD></TR> # </TABLE> ### Interface 2 >> Descr: 'eth0' | Name: '' | Ip: '192.168.122.54' | Eth: '00-11-5b-78-db-ad' ###### The following interface is commented out because: ### * it is operationally DOWN # # Target[localhost_2]: 2:[EMAIL PROTECTED]: # SetEnv[localhost_2]: MRTG_INT_IP="192.168.122.54" MRTG_INT_DESCR="eth0" # MaxBytes[localhost_2]: 1250000 # Title[localhost_2]: Traffic Analysis for 2 -- mail.douglas.lk # PageTop[localhost_2]: <H1>Traffic Analysis for 2 -- mail.douglas.lk</H1> # <TABLE> # <TR><TD>System:</TD> <TD>mail.douglas.lk in Unknown</TD></TR> # <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> # <TR><TD>Description:</TD><TD>eth0 </TD></TR> # <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> # <TR><TD>ifName:</TD> <TD></TD></TR> # <TR><TD>Max Speed:</TD> <TD>1250.0 kBytes/s</TD></TR> # <TR><TD>Ip:</TD> <TD>192.168.122.54 ()</TD></TR> # </TABLE> ### Interface 3 >> Descr: 'eth1' | Name: '' | Ip: '192.168.4.6' | Eth: '00-50-ba-83-41-d9' ### Target[localhost_3]: 3:[EMAIL PROTECTED]: SetEnv[localhost_3]: MRTG_INT_IP="192.168.4.6" MRTG_INT_DESCR="eth1" MaxBytes[localhost_3]: 12500000 Title[localhost_3]: Traffic Analysis for 3 -- mail.douglas.lk PageTop[localhost_3]: <H1>Traffic Analysis for 3 -- mail.douglas.lk</H1> <TABLE> <TR><TD>System:</TD> <TD>mail.douglas.lk in Unknown</TD></TR> <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> <TR><TD>Description:</TD><TD>eth1 </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR> <TR><TD>Ip:</TD> <TD>192.168.4.6 (mail.douglas.lk)</TD></TR> </TABLE> ### Interface 4 >> Descr: 'sit0' | Name: '' | Ip: '' | Eth: '00-00-00-00-41-d9' ### ### The following interface is commented out because: ### * it is administratively DOWN ### * it is operationally DOWN ### * has a speed of 0 which makes no sense # # Target[localhost_4]: 4:[EMAIL PROTECTED]: # SetEnv[localhost_4]: MRTG_INT_IP="" MRTG_INT_DESCR="sit0" # MaxBytes[localhost_4]: 0 # Title[localhost_4]: Traffic Analysis for 4 -- mail.douglas.lk # PageTop[localhost_4]: <H1>Traffic Analysis for 4 -- mail.douglas.lk</H1> # <TABLE> # <TR><TD>System:</TD> <TD>mail.douglas.lk in Unknown</TD></TR> # <TR><TD>Maintainer:</TD> <TD>[EMAIL PROTECTED]</TD></TR> # <TR><TD>Description:</TD><TD>sit0 </TD></TR> # <TR><TD>ifType:</TD> <TD>Encapsulation Interface (131)</TD></TR> # <TR><TD>ifName:</TD> <TD></TD></TR> # <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR> # </TABLE> and here is my /etc/snmp/snmpd.conf file [EMAIL PROTECTED] mrtgnew]# cat /etc/snmp/snmpd.conf com2sec local localhost public com2sec mynetwork 192.1.54.0/24 public com2sec mynetwork 192.168.9.0/24 public group MyRWGroup v1 local group MyROGroup v1 mynetwork group MyRWGroup v1 otherv3user view all included .1 80 access MyROGroup "" any noauth exact all none none access MyRWGroup "" any noauth exact all all all syscontact [EMAIL PROTECTED] then , I ran below command. it worked too. [EMAIL PROTECTED] mrtgnew]# indexmaker --output=/var/www/mrtgnew/indexnew.html /etc/mrtg/mrtgnew.cfg then, I ran below commands 3 times. [EMAIL PROTECTED] mrtgnew]# indexmaker --output=/var/www/mrtgnew/indexnew.html /etc/mrtg/mrtgnew.cfg [EMAIL PROTECTED] mrtgnew]# env LANG=C /usr/bin/mrtg /etc/mrtg/mrtgnew.cfg Rateup WARNING: /usr/bin/rateup could not read the primary log file for localhost_3 Rateup WARNING: /usr/bin/rateup The backup log file for localhost_3 was invalid as well Rateup WARNING: /usr/bin/rateup Can't remove localhost_3.old updating log file Rateup WARNING: /usr/bin/rateup Can't rename localhost_3.log to localhost_3.old updating log [EMAIL PROTECTED] mrtgnew]# env LANG=C /usr/bin/mrtg /etc/mrtg/mrtgnew.cfg Rateup WARNING: /usr/bin/rateup Can't remove localhost_3.old updating log file [EMAIL PROTECTED] mrtgnew]# env LANG=C /usr/bin/mrtg /etc/mrtg/mrtgnew.cfg But, I get traditional mrtg page. Nothing related to squid. No LoadMIBs: /etc/squid/mib.txt file hase been loaed to that index.html page? HELP NEEDED again? -- Thank you Indunil Jayasooriya
