Hi I'm trying to force all FTP connections direct. I have a parent cache and at the moment ftp connections via a brower works fine and is sent directly but my problem is that when using a client like filezilla it sends the connection to the parent cache and not directly.
I have enabled the following settings: acl FTP proto FTP always_direct allow FTP acl Safe_ports port 21 http_access allow CONNECT Safe_ports Is there anything I missed? Regards Jasper > -----Original Message----- > From: Amos Jeffries [mailto:[email protected]] > Sent: Wednesday, May 09, 2012 12:31 AM > To: [email protected] > Subject: Re: [squid-users] Re: FTP through squid > > On 09.05.2012 01:18, Hugo Deprez wrote: > > Hello, > > > > thank you for the information. > > > > If I sepcify the following parameter in my configuration file it : > > ftp_epsv OFF > > > > FTP with firefox is working. > > > > I think users will needs to use Filezilla or something equivalent, so > > what kind of Solution Do I Have ? > > With Squid, only that nasty CONNECT open-proxy situation. > > Frox proxy is the one we usually point people at for FTP protocol proxying. It > does FTP proxy without needing the HTTP wrapping layers like Squid. > > > > > > My main goal is to setup a squid in order to specify bandwith > > limitation. > > > > By the way, does delay_parameters are apply to Safe_ports ? > > delay_parameters applies to requests which past the delay_access ACL set > for each pool. Safe_ports is just an ACL test. > > > For information I use the following ACL : > > delay_access 1 allow all > > Then delay pool #1 in your config is applied to *all* traffic. > > Amos
