On 5/07/2013 6:26 p.m., jinge wrote:
Hi, all.
We use squid for a long time. And recently we upgrade our squid to 3.3.4 and
begin to use SMP and rock.
This is our related configure.
include /usr/local/etc/squid/commonbk/bk.global-options.conf
include /usr/local/etc/squid/commonbk/bk.refresh-pattern.conf
include /usr/local/etc/squid/commonbk/bk.acl-define.conf
include /usr/local/etc/squid/commonbk/bk.acl-action.conf
#include /usr/local/etc/squid/squid.conf
cache_dir rock /cache1/rock 48000 max-size=31000 max-swap-rate=300
swap-timeout=300
cache_dir rock /cache2/rock 48000 max-size=31000 max-swap-rate=300
swap-timeout=300
workers 3
cpu_affinity_map process_numbers=1,2,3 cores=3,5,7
if ${process_number} = 1
include /usr/local/etc/squid/commonbk/backend5a.conf
endif
if ${process_number} = 2
include /usr/local/etc/squid/commonbk/backend5b.conf
endif
if ${process_number} = 3
include /usr/local/etc/squid/commonbk/backend5c.conf
endif
Lot of sub-config files there. What do they contain?
access_log /dev/null
Do not waste rsources formatting log lines only to send them to /dev/null.
"access_log none" does what you want in a far more efficient way.
cache_log /var/log/squid/cache.log
and our machine
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu Raring Ringtail (development branch)
Release: 13.04
Codename: raring
total used free shared buffers cached
Mem: 15G 14G 1.5G 0B 27M 6.7G
-/+ buffers/cache: 7.5G 8.1G
Swap: 16G 0B 16G
Linux 3.8.0-16-generic #26-Ubuntu SMP Mon Apr 1 19:52:57 UTC 2013 x86_64 x86_64
x86_64 GNU/Linux
/dev/sdb1 137G 13G 125G 9% /cache1
/dev/sdc1 69G 13G 57G 18% /cache2
/dev/sdd1 69G 37G 33G 54% /cache3
/dev/sde1 69G 31G 38G 45% /cache4
/dev/sdf1 69G 31G 39G 45% /cache5
we found that the Rock won't fill the cache_dir in 48GB. And our ratio is so low
Hits as % of all requests: 5min: 4.3%, 60min: 4.3%
Hits as % of bytes sent: 5min: 3.3%, 60min: 3.3%
Memory hits as % of hit requests: 5min: 33.7%, 60min: 32.1%
Disk hits as % of hit requests: 5min: 8.5%, 60min: 9.0%
Can anyone tell me what's wrong with my squid?
Not from just those numbers. This is where an access.log comes in handy.
For identifying where the MISSes are and if any should have been HITs.
Regards
Jinge
