-----Original Message----- From: Eliezer Croitoru [mailto:[email protected]] Sent: Thursday, 1 August 2013 5:42 AM To: [email protected] Subject: Re: [squid-users] Problem with compile squid 3.4.0.1 on RHEL6 x64
Hey Kris and Hussam, This issue exists probably due to the "-fPIC" flag that is being used by default by the RPMBUILD tool. I posted a thing on it in the squid-dev list. if you build squid using regular methods such as "./configure && make && make install" it would be built fine. I would later compare the build environment on both Fedora And CentOS.. Since I am not RH engineer I cannot speak or design for them but I do design for those that needs that package up and running to make sure new bugs dosn't take effect on newer systems. Eliezer On 07/31/2013 02:35 PM, Hussam Al-Tayeb wrote: > On Wednesday 31 July 2013 01:52:35 Kris Glynn wrote: >> Hi, >> >> I'm using a squid.spec from squid 3.3 to build 3.4.0.1 but it fails >> with >> "/usr/bin/ld: ../snmplib/libsnmplib.a(snmp_vars.o): relocation >> R_X86_64_32 against `.rodata' can not be used when making a shared >> object; recompile with -fPIC ../snmplib/libsnmplib.a: could not read >> symbols: Bad value" >> >> libtool: link: g++ -I/usr/include/libxml2 -Wall -Wpointer-arith >> -Wwrite-strings -Wcomments -Wshadow -Werror -pipe -D_REENTRANT -O2 -g >> -fPIC -fpie -march=native -std=c++0x .libs/squidS.o -fPIC -pie -Wl,-z >> -Wl,relro -Wl,-z -Wl,now -o squid AclRegs.o AuthReg.o >> AccessLogEntry.o AsyncEngine.o YesNoNone.o cache_cf.o CacheDigest.o >> cache_manager.o carp.o cbdata.o ChunkedCodingParser.o client_db.o >> client_side.o client_side_reply.o client_side_request.o BodyPipe.o >> clientStream.o CompletionDispatcher.o ConfigOption.o ConfigParser.o >> CpuAffinity.o CpuAffinityMap.o CpuAffinitySet.o debug.o delay_pools.o >> DelayId.o DelayBucket.o DelayConfig.o DelayPool.o DelaySpec.o >> DelayTagged.o DelayUser.o DelayVector.o NullDelayId.o >> ClientDelayConfig.o disk.o DiskIO/DiskIOModule.o DiskIO/ReadRequest.o >> DiskIO/WriteRequest.o dlink.o dns_internal.o DnsLookupDetails.o >> errorpage.o ETag.o event.o EventLoop.o external_acl.o >> ExternalACLEntry.o FadingCounter.o fatal.o fd.o fde.o filemap.o >> fqdncache.o ftp.o FwdState.o gopher.o helper.o HelperChildConfig.o >> HelperReply.o htcp.o http.o HttpHdrCc.o HttpHdrRange.o HttpHdrSc.o >> HttpHdrScTarget.o HttpHdrContRange.o HttpHeader.o HttpHeaderTools.o >> HttpBody.o HttpMsg.o HttpParser.o HttpReply.o RequestFlags.o >> HttpRequest.o HttpRequestMethod.o icp_v2.o icp_v3.o int.o internal.o >> ipc.o ipcache.o SquidList.o main.o MasterXaction.o mem.o mem_node.o >> MemBuf.o MemObject.o mime.o mime_header.o multicast.o neighbors.o >> Notes.o Packer.o Parsing.o pconn.o peer_digest.o >> peer_proxy_negotiate_auth.o peer_select.o peer_sourcehash.o >> peer_userhash.o redirect.o refresh.o RemovalPolicy.o send-announce.o >> MemBlob.o snmp_core.o snmp_agent.o SquidMath.o SquidNew.o stat.o >> StatCounters.o StatHist.o String.o StrList.o stmem.o store.o >> StoreFileSystem.o store_io.o StoreIOState.o store_client.o >> store_digest.o store_dir.o store_key_md5.o store_log.o >> store_rebuild.o store_swapin.o store_swapmeta.o store_swapout.o >> StoreMeta.o StoreMetaMD5.o StoreMetaSTD.o StoreMetaSTDLFS.o >> StoreMetaUnpacker.o StoreMetaURL.o StoreMetaVary.o StoreStats.o >> StoreSwapLogData.o Server.o SwapDir.o MemStore.o time.o tools.o >> tunnel.o unlinkd.o url.o URLScheme.o urn.o wccp.o wccp2.o whois.o >> wordlist.o LoadableModule.o LoadableModules.o >> DiskIO/DiskIOModules_gen.o err_type.o err_detail_type.o globals.o >> hier_code.o icp_opcode.o LogTags.o lookup_t.o repl_modules.o >> swap_log_op.o DiskIO/AIO/AIODiskIOModule.o >> DiskIO/Blocking/BlockingDiskIOModule.o >> DiskIO/DiskDaemon/DiskDaemonDiskIOModule.o >> DiskIO/DiskThreads/DiskThreadsDiskIOModule.o >> DiskIO/IpcIo/IpcIoDiskIOModule.o DiskIO/Mmapped/MmappedDiskIOModule.o >> -Wl,--export-dynamic auth/.libs/libacls.a ident/.libs/libident.a >> acl/.libs/libacls.a acl/.libs/libstate.a auth/.libs/libauth.a >> libAIO.a libBlocking.a libDiskDaemon.a libDiskThreads.a libIpcIo.a >> libMmapped.a acl/.libs/libapi.a base/.libs/libbase.a >> ./.libs/libsquid.a ip/.libs/libip.a fs/.libs/libfs.a >> ipc/.libs/libipc.a mgr/.libs/libmgr.a anyp/.libs/libanyp.a >> comm/.libs/libcomm.a eui/.libs/libeui.a http/.libs/libsquid-http.a >> icmp/.libs/libicmp.a icmp/.libs/libicmp-core.a log/.libs/liblog.a >> format/.libs/libformat.a repl/libheap.a repl/liblru.a -lpthread >> -lcrypt adaptation/.libs/libadaptation.a esi/.libs/libesi.a >> ../lib/libTrie/libTrie.a -lxml2 -lexpat ssl/.libs/libsslsquid.a >> ssl/.libs/libsslutil.a snmp/.libs/libsnmp.a ../snmplib/libsnmplib.a >> ../lib/.libs/libmisccontainers.a ../lib/.libs/libmiscencoding.a >> ../lib/.libs/libmiscutil.a -lssl -lcrypto -lgssapi_krb5 -lkrb5 >> -lk5crypto -lcom_err -L/root/rpmbuild/BUILD/squid-3.4.0.1/compat >> -lcompat-squid -lm -lnsl -lresolv -lcap -lrt -ldl >> -L/root/rpmbuild/BUILD/squid-3.4.0.1 -lltdl >> /usr/bin/ld: ../snmplib/libsnmplib.a(snmp_vars.o): relocation >> R_X86_64_32 against `.rodata' can not be used when making a shared >> object; recompile with -fPIC ../snmplib/libsnmplib.a: could not read >> symbols: Bad value >> collect2: ld returned 1 exit status >> libtool: link: rm -f ".libs/squidS.o" >> make[3]: *** [squid] Error 1 >> make[3]: Leaving directory `/root/rpmbuild/BUILD/squid-3.4.0.1/src' >> make[2]: *** [all-recursive] Error 1 >> make[2]: Leaving directory `/root/rpmbuild/BUILD/squid-3.4.0.1/src' >> make[1]: *** [all] Error 2 >> make[1]: Leaving directory `/root/rpmbuild/BUILD/squid-3.4.0.1/src' >> make: *** [all-recursive] Error 1 >> >> Any ideas? >> >> >> >> > > > I don't know much about spec files but try unsetting CFLAGS and > CXXFLAGS before configuring. > unsetting CFLAGS and CXXFLAGS before configuring worked. Thanks. The content of this e-mail, including any attachments, is a confidential communication between Virgin Australia Airlines Pty Ltd (Virgin Australia) or its related entities (or the sender if this email is a private communication) and the intended addressee and is for the sole use of that intended addressee. If you are not the intended addressee, any use, interference with, disclosure or copying of this material is unauthorized and prohibited. If you have received this e-mail in error please contact the sender immediately and then delete the message and any attachment(s). There is no warranty that this email is error, virus or defect free. This email is also subject to copyright. No part of it should be reproduced, adapted or communicated without the written consent of the copyright owner. If this is a private communication it does not represent the views of Virgin Australia or its related entities. Please be aware that the contents of any emails sent to or from Virgin Australia or its related entities may be periodically monitored and reviewed. Virgin Australia and its related entities respect your privacy. Our privacy policy can be accessed from our website: www.virginaustralia.com
