Hiya
If you are trying to link against a .a library then you need to do
a static link not a dynamic as it is not an so file. so set the
-lvpopmail line in the Makefile to be the fullpath (including filename of
the .a file library) so for example it could be
-l/usr/local/lib/libvpopmail.a
This should statically link the library to the binary and be happy..
(obvioulsy change the path to the one you have).
Hope this helps
Graeme
On Fri, 23 Aug 2002, Mike Jimenez wrote:
> I am running vpopmail-5.2
>
> ls ~vpopmail/lib
> libvpopmail.a
>
> Thanks
>
> Mike Jimenez
>
>
> -----Original Message-----
> From: Tren Blackburn [mailto:[EMAIL PROTECTED]]
> Sent: Friday, August 23, 2002 10:38 AM
> To: [EMAIL PROTECTED]
> Subject: RE: [sqwebmail] compile problem on Solaris 8
>
> What does
>
> ls ~vpopmail/lib produce? What version of vpopmail are you running?
>
> Regards,
>
> Tren
>
> > -----Original Message-----
> > From: Mike Jimenez [mailto:[EMAIL PROTECTED]]
> > Sent: Friday, August 23, 2002 11:36 AM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [sqwebmail] compile problem on Solaris 8
> >
> >
> > Yes I am compiling as root and my current install of vpopmail
> > is working fine? So I am not too sure why this install is not
> > working correctly Thanks
> >
> > Mike
> > -----Original Message-----
> > From: Tren Blackburn [mailto:[EMAIL PROTECTED]]
> > Sent: Friday, August 23, 2002 10:10 AM
> > To: [EMAIL PROTECTED]
> > Subject: RE: [sqwebmail] compile problem on Solaris 8
> >
> > Are you compiling as root? If so, then you probably don't
> > have vpopmail installed properly, and if you're not compiling
> > as root, compile as root.
> >
> > Regards,
> >
> > Tren
> >
> > > -----Original Message-----
> > > From: Mike Jimenez [mailto:[EMAIL PROTECTED]]
> > > Sent: Friday, August 23, 2002 10:59 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: [sqwebmail] compile problem on Solaris 8
> > >
> > >
> > > For some reason I cannot even find -lvpopmail at this point I
> > > am a little confused as what I can do to get this compiled.
> > > If someone has experienced this problem and could offer some
> > > more input that would be great. Thanks
> > >
> > >
> > > Mike Jimenez
> > >
> > > -----Original Message-----
> > > From: Graeme Hinchliffe [mailto:[EMAIL PROTECTED]]
> > > On Behalf Of Graeme Hinchliffe
> > > Sent: Friday, August 23, 2002 9:04 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: Re: [sqwebmail] compile problem on Solaris 8
> > >
> > > Hiya
> > > You could always take the ikky approach, and set
> > > LD_LIBRARY_PATH to include the path where libvpopmail lives.
> > > before running the make.
> > >
> > > But I guess there may be a configure option somewhere that
> > > may allow you to specify the path to the library.
> > >
> > > failing that you could always edit the relivant Makefile and
> > > add the path the the library path list in there
> > >
> > > I think it's
> > >
> > > -L<put your path here>
> > >
> > > in the right place (or wherever you find -lvpopmail)
> > >
> > > Hope thats of some use.
> > >
> > > Graeme
> > >
> > > On Fri, 23 Aug 2002, Mike Jimenez wrote:
> > >
> > > > Hello,
> > > > I am trying to compile "sqwebmail-3.3.7.20020819" with
> > > "vpopmail-5.2"
> > > > and my configure part goes thru fine without any errors but
> > > when I run
> > > > make I get the following error can any offer some input as to what
> > > might
> > > > be going on?
> > > > Thanks
> > > >
> > > > Here is my configure script
> > > > ./configure --enable-softtimeout=3600
> > --with-ispell=/usr/bin/ispell
> > > > --enable-cgibindir=/apache/cgi-bin
> > --enable-imagedir=/apache/htdocs
> > > > --without-authpam --without-authuserdb --enable-webpass=no
> > > > --without-authpwd --without-authshadow
> > > --enable-mimetypes=/apache/conf
> > > >
> > > >
> > > > Here is my error message after running make
> > > >
> > > > ld: fatal: library -lvpopmail: not found
> > > > ld: fatal: File processing errors. No output written to sqwebmail
> > > > collect2: ld returned 1 exit status
> > > > *** Error code 1
> > > > make: Fatal error: Command failed for target `sqwebmail' Current
> > > > working directory
> > > > /export/home/installers/sqwebmail-3.3.7.20020819/sqwebmail
> > > > *** Error code 1
> > > > make: Fatal error: Command failed for target
> > > `all-recursive' Current
> > > > working directory
> > > > /export/home/installers/sqwebmail-3.3.7.20020819/sqwebmail
> > > > *** Error code 1
> > > > make: Fatal error: Command failed for target `all-recursive-am'
> > > > Current working directory
> > > > /export/home/installers/sqwebmail-3.3.7.20020819/sqwebmail
> > > > *** Error code 1
> > > > make: Fatal error: Command failed for target `all-recursive'
> > > >
> > > > Mike Jimenez
> > > >
> > > >
> > >
> > > -----
> > > Graeme Hinchliffe BSc (Hons)
> > _
> > > Unix Systems Engineer (UK Datacentre) ASCII
> > ribbon campaign (
> > > )
> > > - against HTML email X
> > > VIA NET.WORKS
> > & vCards /
> > > \
> > > http://arc.pasp.de/
> > > Tel +44-1925-484065
> > > Fax +44-1925-484055
> > >
> > > ICQ : 3842605 (name : Link)
> > >
> > www.vianetworks.co.uk
> >
> >
> >
> >
> >
>
>
>
-----
Graeme Hinchliffe BSc (Hons) _
Unix Systems Engineer (UK Datacentre) ASCII ribbon campaign ( )
- against HTML email X
VIA NET.WORKS & vCards / \
http://arc.pasp.de/
Tel +44-1925-484065
Fax +44-1925-484055
ICQ : 3842605 (name : Link)
www.vianetworks.co.uk
