Sir, The tcpdump does not show any query coming fm sqwebmail server.
[1] On the ldap server --authdameon.ldap is running ok (/usr/lib/courier-imap/libexec/authlib/authdaemond.ldap) --/usr/lib/courier-imap/etc/pop3d uses AUTHMODULES="authdaemon" --/usr/lib/courier-imap/etc/authdaemonrc uses authmodulelist="authldap" [2] On Sqwebmail server authdaemon is running (/usr/local/share/sqwebmail/libexec/authlib/authdaemon) I configured sqwebmail as below: 1. ./configure --with-db=db --enable-autopurge=10 --with-defaultlang=en --enabl e-cgibindir=/var/www/cgi-bin --enable-bannerprog=program --with-maxargsize=1 0000000 --with-maxmsgsize=6000000 --with-ispell=/usr/bin/ispell I followed the steps as below. 2.make configure-check 3. umask 022 4. make 5. set cron job that runs at regular intervals: su -c "/usr/local/share/sqwebmail/cleancache.pl" bin 6. etc/rc.d/init.d/authdaemond stop/start: startup script for authdameond for sqwebmail 7. make install-configure How do i debug ldap? Pl suggest. Regards, Suhag ----- Original Message ----- From: "Brian Candler" <[EMAIL PROTECTED]> To: "suhag" <[EMAIL PROTECTED]> Cc: "Peters, Michael D." <[EMAIL PROTECTED]>; "[EMAIL PROTECTED] Com (E-mail)" <[EMAIL PROTECTED]> Sent: Tuesday, July 29, 2003 4:05 PM Subject: Re: [sqwebmail] can not login thro Sqwebmail > On Tue, Jul 29, 2003 at 03:12:00PM +0530, suhag wrote: > > > > Hi all, > > I've configured sqwebmail-3.5.3 on a machine different than the > > qmail/imap/ldap installation. > > I'd like users to get authenticated thro ldap. I've modified my > > authldaprc > > file accordincly & started the authdaemond process. But can log in. > > Is it really possible to have such setup or do i need to put > > sqwebmail and > > ldap on the same machine. > > No, sqwebmail and the ldap server can be on different machines - this is how > I run it. > > You need to debug your authentication problem step-by-step, just saying "I > can't login" is not sufficient. Probably the best idea is to turn on > debugging on the LDAP server - then you can see whether queries are being > received, if so what they are, and what the results are. > > Also: > tcpdump -i eth0 -n -s1500 -X tcp port 389 > > will show you the LDAP queries (but they're BER-encoded, so you won't be > able to see easily the difference between "bind accept" and "bind fail", but > you will be able to see the search filters and attributes returned) > > If no messages are getting sent across - then you need to check whether > authdaemond.ldap is running (if not, did you configure properly?) and > whether the pop3 configuration says to use authdaemon, and the authdaemonrc > configuration says to use authldap. > > Regards, > > Brian. >
