Dear Ken, I have some problem changing password in sqwebmail. Perhaps you could help. 1. I tried changing password from the newly-created domain. From sqwebmail, I got "Unable to change password" message. Check my config script below. 2. OK, I move the new domain files and copy the old mail data from my production mailserver. I can login, everything sent/receive mail, all OK. I proceed to change password. No error. I logout from sqwebmail and relogin. Now old pass is needed instead of the new pass. I telnet to port 110 and login. Need to key in old pass and NOT new pass. Hmmmm????? My old data is sqwebmail-1.02 and vpopmail-4.94. The new ones are sqwebmail-1.24 and vpopmail-4.98. I also noticed in sqwebmail 1.24 that the sqwebmail-pass file is not created in the ~vpopmail/domains/mydomain.com/username/Maildir. Any help is most appreaciated. --- sqwebmail-v1.24 --- ./configure --with-htmllibdir=/usr/local/share/sqwebmail \ --enable-cgibindir=/home/httpd/cgi-bin \ --enable-imagedir=/usr/local/share/sqwebmail \ --with-authvchkpw \ --without-authpwd \ --without-authpam \ --without-authshadow \ --without-authuserdb \ --without-authldap \ --without-authdaemon \ --enable-imageurl=http://devmail.pansar.com.my/images/ \ --without-ispell \ --enable-webpass=no \ --enable-webpass=vpopmail \ --enable-hardtimeout=21600 \ --enable-softtimeout=21600 \ --enable-autopurge=7 \ --enable-maxpurge=90 \ --with-cachedir --- vpopmail-v4.98 --- ./configure --enable-qmaildir=/var/qmail \ [EMAIL PROTECTED] \ --enable-tcprules-prog=/usr/local/bin/tcprules \ --enable-logging=y \ --enable-sqwebmail-pass=y \ --enable-log-name=vpopmail \ --enable-vpopuser=vpopmail \ --enable-vpopgroup=vchkpw \ --enable-tcpserver-file=/etc/tcp.smtp \ --enable-default-domain=devmail.pansar.com.my \ --enable-passwd=n \ --enable-hardquota=10000000 ----------------------------------------------- Francis P. Ling [EMAIL PROTECTED] Network Administrator +6084-333366 Pan Sarawak Co Sdn Bhd www.pansar.com.my -----------------------------------------------
