> * Do an ldd on the binary. See what dynamic libraries are being loaded.
% ldd /usr/local/www/cgi-bin/sqwebmail
/usr/local/www/cgi-bin/sqwebmail:
libcrypt.so.2 => /usr/lib/libcrypt.so.2 (0x280a2000)
libc.so.3 => /usr/lib/libc.so.3 (0x280b7000)
> * Verify that login caching is set up correctly. Sounds like you don't have
> the login cache properly set up. This will result in a fallback of EVERY
> request getting authenticated against whatever you're using for
> authentication.
I think it's setup OK - see below. Also, initially I had setup sqwebmail
withOUT login caching and then I got the slowness complaint, so I set it
up WITH login caching and had the same problem.
Thanks,
Tim
% sudo ls -alR /var/run/sqwebmail
total 3
drwxr-xr-x 3 bin wheel 512 Jul 16 19:06 .
drwxr-xr-x 4 root wheel 512 Jul 16 19:01 ..
drwx------ 3 bin wheel 512 Jul 16 19:06 138240
/var/run/sqwebmail/138240:
total 3
drwx------ 3 bin wheel 512 Jul 16 19:06 .
drwxr-xr-x 3 bin wheel 512 Jul 16 19:06 ..
drwx------ 2 bin wheel 512 Jul 16 19:06 ti
/var/run/sqwebmail/138240/ti:
total 3
drwx------ 2 bin wheel 512 Jul 16 19:06 .
drwx------ 3 bin wheel 512 Jul 16 19:06 ..
-rw------- 1 bin wheel 67 Jul 16 19:18 tim.authpwd
% ls -ld /usr/local/www/cgi-bin/sqwebmail
-rwsr-xr-x 1 root wheel 270212 Jul 16 19:06
/usr/local/www/cgi-bin/sqwebmail
% sudo more /var/run/sqwebmail/138240/ti/tim.authpwd
1000 1000 /usr/home/tim/Maildir
AUTHADDR=tim
AUTHFULLNAME=Tim
