> File authdaemonrc must contain the vchkpw authentication module. By default after installation it contain authmodulelist="authcustom authvchkpw authldap" so it should be OK... I've allready try with only authvchkpw , same problem... I use sqwebmail on another server with no problem, so i'm sure how i insert my login name and password :) Thx for the help... Best regards... _ (_' L'informatique est ma passion, vous la simplifier, mon métier ! ,_)téphane Bouvard [[EMAIL PROTECTED]] http://www.antarex.be > -----Message d'origine----- > De : Bernd Plagge [mailto:[EMAIL PROTECTED]] > Envoyé : mardi 20 août 2002 09:54 > À : Stephane Bouvard -ML- > Cc : [EMAIL PROTECTED] > Objet : Re: RE : [sqwebmail] Sqwebmail with qmail/vpopmail > > > Stephane, > > > When compiling you can (and should) specify the vchkpw module > (and possibly disable other modules). If you have vpopmail > installed the configuration program should find it and > include the vckkpw module - you do not have to enter the > vpopmail installation path. > > You should then be able to log into the system entering mail > acount and domain (e.g. [EMAIL PROTECTED]). > > Regards, > > Bernd > > > Stephane Bouvard -ML- から： > > > I have now a authdaemond.plain when i do a ps auxw, but i > still cannot > > authenticate... And i still do not have any settings to > specify where my vpopmail is installed... It's still strange > for me, i need a vchkpw authentication, not a plain one... > > > > Of course i use username@domain to authenticate... I've also tryed > > with username%domain ... But no luck > > > > How to test the authdaemond process, is there any log > somewhere, can i > > test it from the command line ? > > > > Best regards... > > _ > > (_' L'informatique est ma passion, vous la simplifier, mon m騁ier ! > > ,_)t駱hane Bouvard [[EMAIL PROTECTED]] http://www.antarex.be > > > > > > > >> -----Message d'origine----- > >> De : Yinka Daramola [mailto:[EMAIL PROTECTED]] > >> Envoy・: mardi 20 ao皦 2002 01:20 > >> タ : Stephane Bouvard -ML- > >> Objet : Re: [sqwebmail] Sqwebmail with qmail/vpopmail > >> > >> > >> I just did this type of installation. You need to remove all > >> the different authentiation moudules that authdaemond starts > >> in the authdaemond script. Make sure only authdaemond.plain > >> is started and you should be fine. > >> > >> Yinka > >> ----- Original Message ----- > >> From: "Stephane Bouvard -ML-" <[EMAIL PROTECTED]> > >> To: <[EMAIL PROTECTED]> > >> Sent: Monday, August 19, 2002 1:31 PM > >> Subject: [sqwebmail] Sqwebmail with qmail/vpopmail > >> > >> > >> Hi, > >> > >> Can someone give me some tips on the installation of > >> sqwebmail with qmail/vpopmail (without mysql) ? > >> > >> I've followed the INSTALL guidelines, i've started the > >> authdaemon (strange for me, when i look a ps auxw i find a > >> authdaemond.ldap , i do not use ldap (nor want to) !), but > >> when i try to authenticate on the sqwebmail webpage, i always > >> receive an INVALID USER ID OR PASSWORD ...) User and > >> password are of course checked many times... > >> > >> What i find strange : i've never defined where my vpopmail is > >> installed during the installation procedure, and i have no > >> configuration option for authvchkpw... > >> > >> Can someone give me some tips, how sqwebmail is configured > >> for authvchkpw, how i can test authdaemon to authenticate a > >> vpopmail user,... > >> > >> Thx in advance > >> > >> Best regards... > >> _ > >> (_' L'informatique est ma passion, vous la simplifier, mon > >> m騁ier ! ,_)t駱hane Bouvard [[EMAIL PROTECTED]] > http://www.antarex.be > >> > >> > >> > >> > >
