On Thu, Apr 29, 2004 at 12:02:23PM -0500, Andy Barker wrote: > I installed sqwebmail-4.0.3 using the FreeBSD port issuing the following > config > > make configure --with-cachedir --enable-webpass=vpopmail > --with-module=authvchkpw
None of those are valid configure settings for sqwebmail!! --with-cachedir takes a directory argument --enable-webpass does not take an argument (apart from 'yes' or 'no') --with-module is not a valid option at all (should be --with-authvchkpw) But in any case if you are using the port you probably ought to be using the port options: make -DWITH_VCHKPW Read /usr/ports/mail/sqwebmail/Makefile for information about the options available to you. > make install > > /usr/local/etc/rc.d/sqwebmail-sqwebmaild.sh start > /usr/local/etc/rc.d/sqwebmail-authdaemond.sh start > > The authdaemond did not start as there was no authdaemonrc create with > the install just the default .dist file. You forgot 'make install-configure'. Or if the port does not do this, then the port is broken. You can do it manually: cd work/sqwebmail-4.0.3 gmake install-configure > I accessed the sqwebmail interface from a web browser (netscape 7.1) and > attempted to login and was denied. You would, if you have no configuration files. > changed authmodulelist="authcustom authcram authuserdb authpam" > line to be > authmodulelist="authvchkpw" Clearly, authvchkpw is not supported in your configuration, because it's not in the available list of modules. That's because you didn't supply the right options when you compiled it. Start again - and if the port doesn't work, try compiling it yourself and follow the instructions in INSTALL. Brian.
