Thank you for following up.Regarding my server networking configuration. This
is an LXD server where Kamailio and rtpproxy are running on the host and
several containers with Asterisk. The Asterisks are running behind of lxdbr0
NAT. This is an example of server configuration:
```
3: eno1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP
group default qlen 1000
link/ether 0c:c4:7a:92:5c:f4 brd ff:ff:ff:ff:ff:ff
inet 192.168.0.31/20 brd 192.168.15.255 scope global eno1
valid_lft forever preferred_lft forever
4: lxdbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP
group default qlen 1000
link/ether fe:5c:a5:12:c9:09 brd ff:ff:ff:ff:ff:ff
inet 10.159.65.1/24 scope global lxdbr0
valid_lft forever preferred_lft forever
inet6 fd42:b153:24b2:77aa::1/64 scope global
valid_lft forever preferred_lft forever
inet6 fe80::248c:4cff:fe69:8ca9/64 scope link
valid_lft forever preferred_lft forever
8: veth7JRSU0@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue
master lxdbr0 state UP group default qlen 1000
link/ether fe:7e:6e:b6:39:3a brd ff:ff:ff:ff:ff:ff link-netnsid 1
inet6 fe80::fc7e:6eff:feb6:393a/64 scope link
valid_lft forever preferred_lft forever
```
So, sometimes I have to define 'listen' parameters. For example, when it is
necessary to configure the advertised address.
Anyway, in order to reproduce the problem I define something like this:
```
listen=udp:10.159.65.1:5060
listen=tcp:10.159.65.1:5060
listen=udp:192.168.0.31:5060
listen=tcp:192.168.0.31:5060
```
I'll check the latest branch during the next couple of days.
Thank you again.
Leonid
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/2033#issuecomment-553252588
_______________________________________________
Kamailio (SER) - Development Mailing List
[email protected]
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev
