Hello
I configure my kamailio.cfg to handle SLA using (SCA module) and shared
presence is working but still facing some issue in case of hold invite and BYE
and the reason behind of that issue is following error
Nov 26 07:38:40 SBC-4-1 /usr/local/sbin/kamailio[104107]: ERROR: sca
[sca_call_info.c:1008]: sca_call_info_invite_request_handler(): Failed to
update sip:[email protected] appearance-index 0 to active
actually, in Kamailio appearances, I can see the entry for this call but the
index is 1 instead of 0, and Kamailio going to update with a 0 index
[root@SBC-4-1 ntcarfte-kamailio]# kamcmd sca.all_appearances
sip:[email protected] 1 active 1606376289
sip:[email protected]:5070;transport=udp sip:[email protected]
186161_mobile-rel120MTQ5OTcyZjFhMjMyNmI1ZGE1MWY4ODc2M2RkN2VmZmQ 45dc18d8
H6cS9vecZ248B
if I manually update appearances using RPC command with index 1 then the phone
started blinking as I change state to held
# kamcmd sca.update_appearance sip:[email protected] 1 held
# kamcmd sca.all_appearances
sip:[email protected] 1 held 1606376516
sip:[email protected]:5070;transport=udp sip:[email protected]
186161_mobile-rel120NzE5MDgyZDc1NjJiYjcwMWFlYmI3NzM3NjE2OTRhZjU 08f005cb
eK9ratm83g92e
kamailio.cfg
route[SCA] {
if(is_method("SUBSCRIBE")) {
if ($hdr(Event) == "call-info" || $hdr(Event) == "line-seize") {
xlog("L_INFO","(MAIN) :HELLO ($avp(uuid)) : $avp(rsi) $sp
$hdr(Event)");
xdbg("SCA: $hdr(Event) SUBSCRIBE $ru from $si:$sp");
sca_handle_subscribe();
exit;
}
return;
}
if (!is_method("BYE|CANCEL|INVITE|PRACK|REFER")) {
return;
}
sca_call_info_update();
}
route[RELAY_OUTBOUND_FS] {
xlog("L_INFO","(RELAY_OUTBOUND_FS) : ($avp(uuid)) : INSIDE ROUTE ");
if (!has_totag()){
$avp(set_h) = 1;
}
t_on_reply("REPLY_OUTBOUND_FS");
route(SCA);
if (!t_relay()) {
sl_reply_error();
}
exit;
}
route[RELAY_INBOUND_FS] {
if(is_method("INVITE|BYE|UPDATE|CANCEL|ACK")) {
$avp(s:puburis_caller) = $fu;
setflag(8);
dlg_manage();
}
if(is_method("REGISTER")) {
t_on_reply("REPLY_REGISTER");
} else {
t_on_reply("REPLY_INBOUND_FS");
}
route(SCA);
if (!t_relay()) {
sl_reply_error();
}
exit;
}
onreply_route[REPLY_INBOUND_FS] {
xdbg("incoming reply\n");
if (status =~ "[456][0-9][0-9]") {
# don't update SCA state here, since there may be
# failure route processing (e.g., call forwarding).
# update state in failure route instead.
return;
}
route(SCA);
}
onreply_route[REPLY_OUTBOUND_FS] {
xdbg("incoming reply\n");
if (status =~ "[456][0-9][0-9]") {
# don't update SCA state here, since there may be
# failure route processing (e.g., call forwarding).
# update state in failure route instead.
return;
}
route(SCA);
}
--
You are receiving this because you are subscribed to this thread.
Reply to this email directly or view it on GitHub:
https://github.com/kamailio/kamailio/issues/2583_______________________________________________
Kamailio (SER) - Development Mailing List
[email protected]
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev
