Hi, Sorry for bothering you again.
We did read your mail and then also read a lot on ChatGPT and got big time CONFUSED. Just to clarify, we are building a missed OBD/IBD platform with zero media involvement and only SIP signalling. We are only planning to do missed OBD where we dial the number and disconnect as soon as call rings. There is no media involved in the call. Also, we would like to build a missed call service where a party call us, and we send 480 busy here. Here too, no media is involved. The link below have reference to UAC module. If kamalio is only a router, why UAC functionality is required. I agree with you that if need media functionalty then rtp_engine and external node is required. Please bear with us to write you back but we have build a highly scalable call transaction per system and looking forward to do it only with Kamalio and no asterisk etc. Regards Sarju From: M S <[email protected]> Date: Tuesday, 27 January 2026 at 11:09 PM To: Chandra Bhan <[email protected]> Cc: "Kamailio (SER) - Development Mailing List" <[email protected]>, Daniel-Constantin Mierla <[email protected]>, Sarju Garg <[email protected]> Subject: Re: [sr-dev] OBD Based Missed Call issue Please read my last email again. Kamailio is NOT an outbound dialer. Trying to originate an outbound call from it is NOT possible. Whoever told you otherwise is wrong and has misguided you. Also, the example code that you mentioned is incorrect as well. Please check kamailio documentation of relevant modules at, https://kamailio.org/docs/modules/devel/ Regards. On Tue, 27 Jan 2026, 10:09 Chandra Bhan, <[email protected]<mailto:[email protected]>> wrote: Hi Response is awaited Thanks & Regards Chandra Bhan Singh Mobile No:- 09999909109 On Mon, 26 Jan, 2026, 19:53 Chandra Bhan, <[email protected]<mailto:[email protected]>> wrote: Hi M S, Thank you so much for your quick response. I should mention that I don’t have deep expertise in Kamailio. I’ve been doing a lot of browsing and research (including ChatGPT), and based on that I found a few possible approaches to make outbound calls directly from Kamailio using a SIP trunk. Some of the methods I came across are: * uac_send_request * app_lua * jsonrpc_exec My goal is to originate outbound calls directly from Kamailio (without Asterisk) toward a GSM/SIP gateway. I’m not fully sure which approach is the most appropriate or recommended in a production setup. I would really appreciate your guidance on the correct and supported way to achieve this. Thanks again for your time and support. For your reference I am sharing some sample code of two method 1st method event_route[xhttp:request] { if ($hu =~ "^/obd") { $avp(msisdn) = $(hu{param.value,msisdn}); if ($avp(msisdn) == $null) { xhttp_reply("400", "Bad Request", "text/plain", "Missing msisdn\n"); exit; } # Destination URI for the call $var(dst_uri) = "sip:" + $avp(msisdn) + "@182.77.59.145:5060<http://182.77.59.145:5060>"; # From URI (mandatory) $var(from_uri) = "sip:[email protected]<mailto:sip%[email protected]>"; xlog("L_INFO", "Calling GSM number: $var(dst_uri)\n"); # Send INVITE using UAC uac_req_send( "INVITE", $var(dst_uri), $var(from_uri), "", "" ); xhttp_reply("200", "OK", "text/plain", "Call initiated\n"); exit; } xhttp_reply("404", "Not Found", "text/plain", "Not Found\n"); exit; } 2nd method . event_route[xhttp:request] { if ($hu !~ "^/obd/") { xhttp_reply("404", "Not Found", "", ""); exit; } $var(uri) = $hu; $var(callee) = $(var(uri){s.select,3,/}); if ($var(callee) == "") { xhttp_reply("400", "Missing MSISDN", "", ""); exit; } xlog("L_INFO", "OBD HTTP caller=9999909109 callee=$var(callee)\n"); $var(json) = "{\"jsonrpc\":\"2.0\",\"method\":\"dialog.bridge_dlg\"," "\"params\":[\"sip:[email protected]<mailto:sip%[email protected]>\"," "\"sip:$var(callee)@182.77.59.145<http://182.77.59.145>\"],\"id\":1}"; jsonrpc_exec($var(json)); xhttp_reply("200", "OK", "", "OBD triggered\n"); exit; } Regards Chandra Bhan Kumar ________________________________ From: M S <[email protected]<mailto:[email protected]>> Sent: Monday, January 26, 2026 7:30 PM To: Kamailio (SER) - Development Mailing List <[email protected]<mailto:[email protected]>> Cc: Daniel-Constantin Mierla <[email protected]<mailto:[email protected]>>; Chandra Bhan <[email protected]<mailto:[email protected]>> Subject: Re: [sr-dev] OBD Based Missed Call issue Kamailio is NOT a media endpoint nor a media gateway. It is a SIP proxy that routes call between two endpoints, gateways or proxies. What you seems to do is trying to originate a call from Kamailio to some provider, which will simply not work. For Outbound Dialer service you need to setup some media gateway like Asterisk, Freeswitch or CUCM (Cisco Unified Media Gateway) etc. Regards. -- Muhammad Shahzad Shafi. Tel: +49 176 99 83 10 85 On Mon, 26 Jan 2026, 13:45 Chandra Bhan via sr-dev, <[email protected]<mailto:[email protected]>> wrote: Hi Daniel I hope you are doing well. Looking for your support on kamailio. I am a new for kamailio. I want to build setup OBD Based Missed Call Solution 1. I able to send http request on kamailio but call not getting dial due to some reason Here is my code. Could you help me to resolve the issue. #!KAMAILIO ####### Global Parameters ######### debug=3 log_stderror=yes memdbg=5 memlog=5 children=8 tcp_accept_no_cl=yes auto_aliases=no listen=udp:172.26.12.138:5060<http://172.26.12.138:5060> listen=tcp:0.0.0.0:8080<http://0.0.0.0:8080> alias=your.public.ip # optional ####### Modules Section ######## loadmodule "sl.so" loadmodule "tm.so" loadmodule "tmx.so" loadmodule "rr.so" loadmodule "pv.so" loadmodule "xlog.so" loadmodule "textops.so" loadmodule "maxfwd.so" loadmodule "sanity.so" loadmodule "siputils.so" loadmodule "xhttp.so" loadmodule "uac.so" ####### Module Parameters ######## # --- TM modparam("tm", "fr_timer", 5000) modparam("tm", "fr_inv_timer", 30000) # --- RR modparam("rr", "enable_double_rr", 1) modparam("rr", "append_fromtag", 1) # --- UAC (authentication profile) # format: # name => sip:proxy, username, password modparam("uac", "uac_reg", "obd => sip:GSM-Gateway-IP:5060,2555,123456" ) ####### Routing Logic ######## request_route { # Sanity checks if (!sanity_check("1511", "7")) { xlog("L_ERR", "Sanity failed\n"); drop; } if (!mf_process_maxfwd_header("10")) { sl_send_reply("483", "Too Many Hops"); exit; } # Handle HTTP requests if ($Rp == 8080 && $rm == "GET") { route(HTTP); exit; } # SIP requests (only outbound calls expected) if (is_method("INVITE")) { record_route(); t_relay(); exit; } if (is_method("ACK|BYE|CANCEL")) { t_relay(); exit; } sl_send_reply("404", "Not Here"); exit; } ####### HTTP ROUTE ######## route[HTTP] { if ($hu =~ "^/call") { # Example: # http://IP:8080/call?msisdn=9999909109 $var(msisdn) = $param(msisdn); if ($var(msisdn) == "") { xhttp_reply("400", "text/plain", "Missing msisdn\n"); exit; } xlog("L_INFO", "HTTP Call request for $var(msisdn)\n"); route(OBD_CALL); xhttp_reply("200", "text/plain", "Call initiated\n"); exit; } xhttp_reply("404", "text/plain", "Invalid URL\n"); exit; } ####### OUTBOUND CALL ROUTE ######## route[OBD_CALL] { $var(dst_uri) = "sip:" + $var(msisdn) + "@GSM-Gateway-IP:5060"; xlog("L_INFO", "Calling $var(dst_uri)\n"); uac_req_send( "INVITE", $var(dst_uri), "sip:[email protected]", "sip:" + $var(msisdn) + "@your.domain", "", "obd" ); exit; } _______________________________________________ Kamailio - Development Mailing List -- [email protected]<mailto:[email protected]> To unsubscribe send an email to [email protected]<mailto:[email protected]> Important: keep the mailing list in the recipients, do not reply only to the sender!
_______________________________________________ Kamailio - Development Mailing List -- [email protected] To unsubscribe send an email to [email protected] Important: keep the mailing list in the recipients, do not reply only to the sender!
