Module: sip-router Branch: master Commit: 3979c5627b123d64ff95064f826523aba978bd29 URL: http://git.sip-router.org/cgi-bin/gitweb.cgi/sip-router/?a=commit;h=3979c5627b123d64ff95064f826523aba978bd29
Author: Daniel-Constantin Mierla <[email protected]> Committer: Daniel-Constantin Mierla <[email protected]> Date: Mon Apr 18 23:21:49 2011 +0200 dispatcher(k): documented the RPC commands --- modules_k/dispatcher/README | 90 +++++++++++++++++++++---- modules_k/dispatcher/doc/dispatcher_admin.xml | 81 ++++++++++++++++++++++- 2 files changed, 157 insertions(+), 14 deletions(-) diff --git a/modules_k/dispatcher/README b/modules_k/dispatcher/README index 0261325..249d5bc 100644 --- a/modules_k/dispatcher/README +++ b/modules_k/dispatcher/README @@ -14,7 +14,7 @@ Edited by Carsten Bock - BASIS AudioNet GmbH + ng-voice.com Copyright © 2004 FhG FOKUS @@ -82,10 +82,16 @@ Carsten Bock 5.2. ds_list 5.3. ds_reload - 6. Installation and Running + 6. Exported RPC Commands - 6.1. Destination List File - 6.2. Kamailio config file + 6.1. dispatcher.set_state + 6.2. dispatcher.list + 6.3. dispatcher.reload + + 7. Installation and Running + + 7.1. Destination List File + 7.2. Kamailio config file 2. Frequently Asked Questions @@ -183,10 +189,16 @@ Chapter 1. Admin Guide 5.2. ds_list 5.3. ds_reload - 6. Installation and Running + 6. Exported RPC Commands + + 6.1. dispatcher.set_state + 6.2. dispatcher.list + 6.3. dispatcher.reload - 6.1. Destination List File - 6.2. Kamailio config file + 7. Installation and Running + + 7.1. Destination List File + 7.2. Kamailio config file 1. Overview @@ -751,7 +763,8 @@ ds_select_dst("1", "$var(a)"); possible parameters: * "i", "I" or "0" - the last destination should be set to inactive and will be ignored in future requests. - * "a", "A" or "1" - the last destination should be set to active. + * "a", "A" or "1" - the last destination should be set to active and + the error-counter should set to "0". * "p", "P" or "2" - the last destination will be set to probing. Note: You will need to call this function "threshhold"-times, before it will be actually set to probing. @@ -872,12 +885,63 @@ onreply_route { MI DATAGRAM Command Format: ":ds_reload:\n." -6. Installation and Running +6. Exported RPC Commands + + 6.1. dispatcher.set_state + 6.2. dispatcher.list + 6.3. dispatcher.reload + +6.1. dispatcher.set_state + + Sets the state for a destination address (can be use to mark the + destination as active or inactive). + + Name: dispatcher.set_state + + Parameters: + * _state_ : state of the destination address + + “a”: active + + “i”: inactive + + “d”: disabled + The states “a” or “i” can be followed by “p” to set probing mode + (e.g. 'ap' or 'ip') + * _group_: destination group id + * _address_: address of the destination in the _group_ + + Example: + sercmd dispatcher.set_state _state_ _group_ _address_ + +6.2. dispatcher.list + + It lists the groups and included destinations. + + Name: dispatcher.list + + Parameters: none + + Example: + sercmd dispatcher.list + +6.3. dispatcher.reload + + It reloads the groups and included destinations. The command is + disabled for call load based dispatching (algorithm 10) since removal + of destinations may leave the list of active calls with broken + references. + + Name: dispatcher.reload + + Parameters: none + + Example + sercmd dispatcher.reload + +7. Installation and Running - 6.1. Destination List File - 6.2. Kamailio config file + 7.1. Destination List File + 7.2. Kamailio config file -6.1. Destination List File +7.1. Destination List File Each destination point must be on one line. First token is the set id (an integer value), followed by destination address (s string value in @@ -926,7 +990,7 @@ r,opt) ... -6.2. Kamailio config file +7.2. Kamailio config file Next picture displays a sample usage of dispatcher. diff --git a/modules_k/dispatcher/doc/dispatcher_admin.xml b/modules_k/dispatcher/doc/dispatcher_admin.xml index 47cc96c..c851db7 100644 --- a/modules_k/dispatcher/doc/dispatcher_admin.xml +++ b/modules_k/dispatcher/doc/dispatcher_admin.xml @@ -1091,7 +1091,86 @@ onreply_route { </section> </section> - + + <section> + <title>Exported RPC Commands</title> + <section> + <title> + <function moreinfo="none">dispatcher.set_state</function> + </title> + <para> + Sets the state for a destination address (can be use to mark the destination + as active or inactive). + </para> + <para> + Name: <emphasis>dispatcher.set_state</emphasis> + </para> + <para>Parameters:</para> + <itemizedlist> + <listitem><para>_state_ : state of the destination address</para> + <itemizedlist> + <listitem><para> <quote>a</quote>: active</para></listitem> + <listitem><para> <quote>i</quote>: inactive</para></listitem> + <listitem><para> <quote>d</quote>: disabled</para></listitem> + </itemizedlist> + <para>The states <quote>a</quote> or <quote>i</quote> can be + followed by <quote>p</quote> to set probing mode (e.g. 'ap' + or 'ip')</para> + </listitem> + + <listitem><para>_group_: destination group id</para></listitem> + + <listitem><para>_address_: address of the destination in the _group_</para></listitem> + </itemizedlist> + <para> + Example: + </para> + <programlisting format="linespecific"> + sercmd dispatcher.set_state _state_ _group_ _address_ + </programlisting> + </section> + <section> + <title> + <function moreinfo="none">dispatcher.list</function> + </title> + <para> + It lists the groups and included destinations. + </para> + <para> + Name: <emphasis>dispatcher.list</emphasis> + </para> + <para>Parameters: <emphasis>none</emphasis></para> + <para> + Example: + </para> + <programlisting format="linespecific"> + sercmd dispatcher.list + </programlisting> + </section> + <section> + <title> + <function moreinfo="none">dispatcher.reload</function> + </title> + <para> + It reloads the groups and included destinations. The command is + disabled for call load based dispatching (algorithm 10) since + removal of destinations may leave the list of active + calls with broken references. + </para> + <para> + Name: <emphasis>dispatcher.reload</emphasis> + </para> + <para>Parameters: <emphasis>none</emphasis></para> + <para> + Example + </para> + <programlisting format="linespecific"> + sercmd dispatcher.reload + </programlisting> + </section> + + </section> + <section> <title>Installation and Running</title> <section> _______________________________________________ sr-dev mailing list [email protected] http://lists.sip-router.org/cgi-bin/mailman/listinfo/sr-dev
