Code snippet
#!ifdef WITH_TCP
#$ru = $ru + ";transport=tcp";
#force_send_socket(xx.xx.xx.xx:5060); where xx.xx.xx.xx is Kamailio
IP-Address
xlog("L_INFO","=>Transport TCP");
xlog("L_INFO"," =>du:$du");
xlog("L_INFO"," =>ru:$ru");
if (!t_relay_to_tcp()) {
sl_reply_error();
}
#!else
xlog("L_INFO","=>Transport UDP");
xlog("L_INFO"," =>du:$du");
xlog("L_INFO"," =>ru:$ru");
if (!t_relay()) {
sl_reply_error();
}
#!endif
LOG =>
ERROR: <core> [core/pvapi.c:1377]: pv_printf(): no more space for spec value
ERROR: <core> [core/pvapi.c:1386]: pv_printf(): buffer overflow -- increase the
NOTE: I have both of these set to 8K and still get these errors
INFO: <script>: =>Transport TCP
INFO: <script>:
=>du:sip:9NCUg2nceiuKagasFQFsAbtsMGcH1yE=@xx.xx.xx.xx:54080;transport=TCP;lr;r2=on;ftag=suhg8sv2lm;nat=yes
INFO: <script>:
=>ru:sip:9NCUg2nceiuKagasFQFsAbtsMGcH1yE=@xx.xx.xx.xx:54080;transport=TCP;lr;r2=on;ftag=suhg8sv2lm;nat=yes
WARNING: <core> [core/forward.c:231]: get_send_socket2(): protocol/port
mismatch (forced tls:xx.xx.xx.xx:443, to tcp:xx.xx.xx.xx:54080)
ERROR: <core> [core/tcp_main.c:2660]: tcpconn_1st_send(): connect
172.21.1.108:54080 failed (RST) Connection refused
ERROR: <core> [core/tcp_main.c:2670]: tcpconn_1st_send(): xx.xx.xx.xx:54080:
connect & send for 0x7f1915a61040 failed: Connection refused (111)
NOTE: Our tcp ports are controlled, a port number this high would
never be opend on our server
NOTE: This error occurs on ACK back to the INVITE
-----Original Message-----
From: sr-users [mailto:sr-users-boun...@lists.kamailio.org] On Behalf Of Alex
Balashov
Sent: Thursday, May 17, 2018 9:44 AM
To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>
Subject: Re: [SR-Users] Further question on transport issue.
What is the full and exact RURI of the request immediately prior to relay, and
also the value of $du?
Can you xlog() both $du and $ru prior to t_relay() and tell us what those
values are?
Thanks,
-- Alex
On Thu, May 17, 2018 at 01:36:25PM +0000, Wilkins, Steve wrote:
> Hello,
>
> I am still struggling with getting TCP relay to work. Kamailio is now trying
> to send TCP but it is using the incorrect port. Kamailio is relaying to
> Asterisk on xx.xx.xx.xx:some-large-port but Asterisk is listening on
> xx.xx.xx.xx:5060. I'm not sure why this is happening. I would appreciate
> any help.
>
> Thank you,
> _______________________________________________
> Kamailio (SER) - Users Mailing List
> sr-users@lists.kamailio.org
> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
Alex Balashov | Principal | Evariste Systems LLC
Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free)
Web: http://www.evaristesys.com/, http://www.csrpswitch.com/
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
