ll Il 01 lug 2018 11:48 AM, "Mojtaba" <[email protected]> ha scritto:
I have strange issue, the output of of `uname -r` command is "3.16.0-4-amd64", while all the debs file are "4.9.0-0.bpo.6-amd64". ngcp-rtpengine_6.4.0.0+0~mr6.4.0.0_all.deb ngcp-rtpengine-daemon_6.4.0.0+0~mr6.4.0.0_amd64.deb ngcp-rtpengine-iptables_6.4.0.0+0~mr6.4.0.0_amd64.deb ngcp-rtpengine-kernel-dkms_6.4.0.0+0~mr6.4.0.0_all.deb ngcp-rtpengine-kernel-source_6.4.0.0+0~mr6.4.0.0_all.deb ngcp-rtpengine-recording-daemon_6.4.0.0+0~mr6.4.0.0_amd64.deb ngcp-rtpengine-utils_6.4.0.0+0~mr6.4.0.0_all.deb Is it the reason of my issue? On Fri, Jun 29, 2018 at 9:57 PM, Aqs Younas <[email protected]> wrote: > you can check by starting your rtpengine with this parameter "--table=0". If > kernal modules is properly installed you will not face any error. > > Best Regards, > > Aqs Younas > > > > On Fri, 29 Jun 2018 at 03:33, Mojtaba <[email protected]> wrote: >> >> Thank you. I installed RTPEngine from git >> (https://github.com/sipwise/rtpengine). >> Let me know how can i be sure kernel module is loaded? and how can i load >> it? >> Thanks >> >> On Thu, Jun 28, 2018 at 6:20 PM, Richard Fuchs <[email protected]> wrote: >> > Looks like you haven't set up the kernel module properly. For the "proc" >> > method of recording to work, the kernel module must be loaded and in >> > use. >> > >> > Cheers >> > >> > >> > On 2018-06-28 05:47, Mojtaba wrote: >> >> >> >> Hi all, >> >> I installed RTPEngine (Version: 6.4.0.0+0~mr6.4.0.0 >> >> git-master-4eb80da) in my VM machine (Debian GNU/Linux 8 (jessie), i >> >> also installed kamailio 5.1. >> >> >> >> In kamailio routes, i have: >> >> route { >> >> ... >> >> #rtpengine_manage("record-call") >> >> rtpengine_manage(); >> >> start_recording(); >> >> ... >> >> } >> >> Here is all other configuration files: >> >> >> >> In /etc/default/ngcp-rtpengine-daemon file: >> >> RUN_RTPENGINE=yes >> >> CONFIG_FILE=/etc/rtpengine/rtpengine.conf >> >> CONFIG_SECTION=rtpengine >> >> PIDFILE=/var/run/ngcp-rtpengine-daemon.pid >> >> MANAGE_IPTABLES=yes >> >> TABLE=0 >> >> >> >> In /etc/default/ngcp-rtpengine-recording-daemon file: >> >> RUN_RTPENGINE_RECORDING=yes >> >> CONFIG_FILE=/etc/rtpengine/rtpengine-recording.conf >> >> CONFIG_SECTION=rtpengine-recording >> >> PIDFILE=/var/run/ngcp-rtpengine-recording-daemon.pid >> >> MUST_NFS=no >> >> NFS_HOST=192.168.1.1 >> >> NFS_REMOTE_PATH=/var/recordings >> >> NFS_LOCAL_MOUNT=/var/lib/rtpengine-recording # must match output-dir if >> >> used >> >> NFS_OPTIONS=hard,intr,tcp >> >> >> >> In /etc/rtpengine/rtpengine.conf file: >> >> [rtpengine] >> >> table = 0 >> >> interface = 192.168.122.200 >> >> listen-ng = 127.0.0.1:2223 >> >> recording-dir = /var/spool/rtpengine/ >> >> recording-method = proc >> >> >> >> In >> >> [rtpengine-recording] >> >> table = 0 >> >> # output-storage = db (use default) >> >> # output-format = mp3 (use default) >> >> # output-mixed = 1 >> >> spool-dir = /var/spool/rtpengine/metadata >> >> output-dir = /var/spool/rtpengine/recording >> >> >> >> But the recording is not work, I have these issues in syslog: >> >> [1530178531.860171] INFO: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Received command >> >> 'start recording' from 127.0.0.1:38654 >> >> [1530178531.860191] NOTICE: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Turning on call >> >> recording. >> >> [1530178531.860239] WARNING: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Call recording through >> >> /proc interface requested, but kernel table not open >> >> [1530178531.860262] ERR: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open >> >> recording metadata file '(null)' for writing: Bad address >> >> [1530178531.860269] ERR: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open >> >> recording metadata file '(null)' for writing: Bad address >> >> [1530178531.860275] ERR: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open >> >> recording metadata file '(null)' for writing: Bad address >> >> [1530178531.860281] ERR: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open >> >> recording metadata file '(null)' for writing: Bad address >> >> [1530178531.860287] ERR: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open >> >> recording metadata file '(null)' for writing: Bad address >> >> [1530178531.860292] ERR: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Failed to open >> >> recording metadata file '(null)' for writing: Bad address >> >> [1530178531.860303] INFO: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Replying to 'start >> >> recording' from 127.0.0.1:38654 (elapsed time 0.000112 sec) >> >> [1530178531.969040] INFO: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Received command >> >> 'start recording' from 127.0.0.1:39374 >> >> [1530178531.969069] INFO: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Replying to 'start >> >> recording' from 127.0.0.1:39374 (elapsed time 0.000004 sec) >> >> [1530178537.176906] INFO: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Received command >> >> 'delete' from 127.0.0.1:40258 >> >> [1530178537.177003] INFO: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Scheduling deletion of >> >> call branch '9052b05a' (via-branch '') in 30 seconds >> >> [1530178537.177026] INFO: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Replying to 'delete' >> >> from 127.0.0.1:40258 (elapsed time 0.000084 sec) >> >> [1530178537.178368] INFO: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Received command >> >> 'start recording' from 127.0.0.1:40258 >> >> [1530178537.178392] INFO: >> >> [MWFhMWM4MmVhYjFmYjY3MzVlZDlmZWMyYjNmNGVhNmY.]: Replying to 'start >> >> recording' from 127.0.0.1:40258 (elapsed time 0.000004 sec) >> >> ^C[1530178543.752740] INFO: Version 6.4.0.0+0~mr6.4.0.0 >> >> git-master-4eb80da shutting down >> >> >> >> Also when i start RTPEngine, I have FATAL error about module >> >> xt_RTPENGINEer in syslog: >> >> Jun 28 05:44:58 debian8 systemd[1]: Starting NGCP RTP/media Proxy >> >> Daemon... >> >> Jun 28 05:44:58 debian8 ngcp-rtpengine-iptables-setup[10203]: >> >> modprobe: FATAL: Module xt_RTPENGINE not found. >> >> Jun 28 05:44:58 debian8 ngcp-rtpengine-iptables-setup[10203]: >> >> iptables: No chain/target/match by that name. >> >> Jun 28 05:44:58 debian8 ngcp-rtpengine-iptables-setup[10203]: >> >> ip6tables: No chain/target/match by that name. >> >> Jun 28 05:44:58 debian8 systemd[1]: Started NGCP RTP/media Proxy >> >> Daemon. >> >> Jun 28 05:44:58 debian8 rtpengine[10219]: [1530179098.989322] INFO: >> >> Generating new DTLS certificate >> >> Jun 28 05:44:59 debian8 rtpengine[10219]: [1530179099.033499] ERR: >> >> FAILED TO CREATE KERNEL TABLE 0 (No such file or directory), KERNEL >> >> FORWARDING DISABLED >> >> J >> >> >> >> Let me know what is the problem and how can i solve it? >> >> >> > >> > _______________________________________________ >> > Kamailio (SER) - Users Mailing List >> > [email protected] >> > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> >> >> >> -- >> --Mojtaba Esfandiari.S >> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> [email protected] >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > > _______________________________________________ > Kamailio (SER) - Users Mailing List > [email protected] > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > -- --Mojtaba Esfandiari.S _______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
_______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
