Hello,
at least the next line:
$ru=$ru+"transport=tcp";
should be like:
$ru=$ru+";transport=tcp";
Note the ; in front of transport.
But in this case, do you want to change the request uri (r-uri/$ru) or
destination uri ($du)?
Cheers,
Daniel
On 17.12.18 08:26, YAS0 CANER wrote:
> Hello,
>
> rewritehostporttrans function solves my problem. but there is another
> problem. rewritehostporttrans function dont pass $avp(val) so
> t_relay() gives invalid uri Error.
>
> Thanks
>
> For example
>
> 1: it works good
> rewritehostporttrans("test1.test:5060;transport=tcp");
>
> if (!t_relay_to_tcp()) {
> xlog("L_ERR", "Error t_relay \n");
> t_reply("500","Server - ERROR ");
> exit;
> }
> xlog([uri-dst : test1.test:5060;transport=tcp] [uri-now : <null> ])
>
> 2: invalid uri error
>
> $avp(dstx)=$_s($rd:$rp;transport=tcp);
> rewritehostporttrans("$avp(dstx)");
>
> xlog([uri-dst : test1.test:5060;transport=tcp] [uri-now : <null> ])
>
> 3: invalid uri error
>
> $avp(dstx)=$rd+":"+$rp+";transport=tcp;";
> rewritehostporttrans("$avp(dstx)");
>
> xlog([uri-dst : test1.test:5060;transport=tcp] [uri-now : <null> ])
>
> 4: invalid uri error
>
> $ru=$ru+"transport=tcp";
>
> 5:invalid Uri error
>
> $var(dstx)=$_s($rd:$rp;transport=tcp);
> rewritehostporttrans("$var(dstx)");
>
> xlog([uri-dst : test1.test:5060;transport=tcp] [uri-now : <null> ])
>
>
> ------------------------------------------------------------------------
> *From:* Daniel-Constantin Mierla <mico...@gmail.com>
> *Sent:* Friday, December 14, 2018 5:08 PM
> *To:* Kamailio (SER) - Users Mailing List; YAS0 CANER
> *Subject:* Re: [SR-Users] Problem with selection Transport Protocol -
> MultiHomed Problem
>
>
> Hello,
>
>
> is there any naptr or srv dns record behind test1.test domain? Or just
> A/CNAME record?
>
>
> Cheers,
> Daniel
>
>
> On 14.12.18 14:35, YAS0 CANER wrote:
>> Hello;
>>
>> i want to force message to send over TCP and IPv6 . so it should be
>> R/W variable. When i set $fs or force_send_socket() it gives error
>> about mismatch protocol !
>>
>> Thanks.
>>
>> Yasin CANER
>> ------------------------------------------------------------------------
>> *From:* sr-users <sr-users-boun...@lists.kamailio.org>
>> <mailto:sr-users-boun...@lists.kamailio.org> on behalf of YAS0 CANER
>> <caner_y...@hotmail.com> <mailto:caner_y...@hotmail.com>
>> *Sent:* Friday, December 14, 2018 4:27 PM
>> *To:* Kamailio (SER) - Users Mailing List
>> *Subject:* [SR-Users] Problem with selection Transport Protocol -
>> MultiHomed Problem
>>
>> Hello ,
>> i have trouble about selection transport protocol. i have tried so
>> many thing but couldnt find TM selected which IPv? and protocol type
>> (TCP or UDP)
>>
>>
>> For example;
>> i have 2 interface ipv6 and ipv4. i will route my message
>> (INVITE-Register etc.) another node that use TCP and IPV6 , domain
>> name is test1.test. TM module or some module resolve this domain to
>> IPV6:UDP but i want to sent it over IPV6:TCP socket. so i cannot
>> know which protocol is resolved and cannot route the right socket.
>>
>> $du variable show only sip:a...@test1.test <sip:a...@test1.test>
>>
>> Conclusion : There isn't any pseudo value about which _destination of
>> IP version_ will use.
>>
>>
>> Thanks
>>
>>
>> Flow:
>>
>> UAC (IPv4:UDP) ----------> Kamailio (MultiHomed) ---->
>> (TCP:IPv6)Kamailio
>>
>> ----
>> Kamailo (multiHomed ) cfg
>> ------
>> auto_bind_ipv6=1
>> dns_try_ipv6=yes
>> dns_retr_time=1
>> dns_retr_no=1
>> dns_cache_flags=4
>> mhomed=1
>> fork=yes
>> tcp_source_ipv6 = [fd61:c23c:b3b6::5]
>> listen=tcp:[fd61:c23c:b3b2::5]:5060
>> listen=udp:[fd61:c23c:b3b2::5]:5060
>> listen=udp:192.168.1.107:5060
>> listen=tcp:192.168.1.107:5060
>>
>>
>> route []{
>>
>> if($dP=="TCP"){
>> xlog("L_INFO","[route] [TCP] 1\n");
>> if (!t_relay_to_tcp()) {
>> xlog("L_ERR", "Error t_relay [route] \n");
>> t_reply("500","Server - ERROR ");
>> exit;
>> }
>> } else if($dP=="TCP"){
>> xlog("L_INFO","[route] [TCP] 2\n");
>> if (!t_relay_to_tcp()) {
>> xlog("L_ERR", "Error t_relay [route] \n");
>> t_reply("500","Server - ERROR ");
>> exit;
>> }
>> }else if($dP=="UDP"){
>> xlog("L_INFO","[route] [UDP] 1\n");
>> if (!t_relay_to_udp()) {
>> xlog("L_ERR", "Error t_relay [route] \n");
>> t_reply("500","Server - ERROR ");
>> exit;
>> }
>> }else{
>> xlog("L_INFO","[route] [??] 1\n");
>> if (!t_relay()) {
>> xlog("L_ERR", "Error t_relay [route] \n");
>> t_reply("500","Server - ERROR ");
>> exit;
>> }
>> }
>> }
>>
>> _______________________________________________
>> Kamailio (SER) - Users Mailing List
>> sr-users@lists.kamailio.org <mailto:sr-users@lists.kamailio.org>
>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
> --
> Daniel-Constantin Mierla -- www.asipto.com <http://www.asipto.com>
> www.twitter.com/miconda <http://www.twitter.com/miconda> --
> www.linkedin.com/in/miconda <http://www.linkedin.com/in/miconda>
> Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
> <http://www.kamailioworld.com>
> Kamailio Advanced Training -- www.asipto.com <http://www.asipto.com>
--
Daniel-Constantin Mierla -- www.asipto.com
www.twitter.com/miconda -- www.linkedin.com/in/miconda
Kamailio World Conference - May 6-8, 2019 -- www.kamailioworld.com
Kamailio Advanced Training -- www.asipto.com
_______________________________________________
Kamailio (SER) - Users Mailing List
sr-users@lists.kamailio.org
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
