Hello Mojtava, > Did you use FHOSS or IMS_DIAMETER_SERVER module? No, I am using our own hss server.
>Anyway what mandatory parameters do you mean exactly? According to RFC6733 section 5.3.1 - https://tools.ietf.org/html/rfc6733#section-5.3.1 The Capabilities-Exchange-Request (CER), indicated by the Command Code set to 257 and the Command Flags' 'R' bit set, is sent to exchange local capabilities. Upon detection of a transport failure, this message MUST NOT be sent to an alternate peer. When Diameter is run over SCTP [RFC4960] or DTLS/SCTP [RFC6083], which allow for connections to span multiple interfaces and multiple IP addresses, the Capabilities-Exchange-Request message MUST contain one Host-IP-Address AVP for each potential IP address that MAY be locally used when transmitting Diameter messages. Message Format <CER> ::= < Diameter Header: 257, REQ > { Origin-Host } { Origin-Realm } 1* { Host-IP-Address } { Vendor-Id } { Product-Name } [ Origin-State-Id ] * [ Supported-Vendor-Id ] * [ Auth-Application-Id ] * [ Inband-Security-Id ] * [ Acct-Application-Id ] * [ Vendor-Specific-Application-Id ] [ Firmware-Revision ] * [ AVP ] Kamailio 5.1 with loaded cdp, cdr_avp, ims_icsf modules and default configuration described here https://github.com/kamailio/kamailio/tree/master/misc/examples/ims/icscf sends Host-IP-Address but Kamailio 5.2 with the same configuration doesn't. Any idea how to fix it? Regards, Pavel Siderov >Hello, >The CER/CEA messages are used just for connections between two peers >diameter interface. Did you use FHOSS or IMS_DIAMETER_SERVER module? In >both cases, you should not have any issue. Anyway what mandatory parameters >do you mean exactly? >WIth Best Regards. Mojtava ><https://www.kamailio.org/docs/modules/5.1.x/modules/ims_diameter_server.html> >On Tue, Mar 12, 2019 at 8:17 PM Pafel <pafels at gmail.com ><https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users>> wrote: > >>* Hello, *>>>>* I am testing ims setup with kamailio 5.2 using the default configuration *>>* provided here: *>>* https://github.com/kamailio/kamailio/tree/master/misc/examples/ims/ <https://github.com/kamailio/kamailio/tree/master/misc/examples/ims/> . *>>* Đ¢here is an issue I am facing with cdp avp in request sent to hss. There *>>* are some missing mandatory parameters in capabilities exchange request like *>*> 257 host-ip-address for example. Any idea how to add it via icscf.xml or *>*> kamailio.cfg ? The same parameter is passed to hss with kamailio 5.1 using *>*> default ims configuration. I read cdp and cdp_avp documentation but *>*> couldn't understand if it is possible to add it. *>>>>* Regards, *>>* Pavel Siderov *>>* _______________________________________________ *>>* Kamailio (SER) - Users Mailing List *>>* sr-users at lists.kamailio.org <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users> *>*> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users <https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users> *>>
_______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
