Daniel Adding in the set_contact_alias() for SUBSCRIBE meant that the NOTIFY now gets a "200 OK", but the light on the phone does not light up even though the extension being monitored is registered.
I notice that after the SUBSCRIBE request, the return message is a "202 OK" instead of a "202 ACCEPTED". Is that correct? I am also now getting this message in the log nathelper [nathelper.c:700]: set_contact_alias(): you can't update contact twice, check your config! ________________________________ From: sr-users <sr-users-boun...@lists.kamailio.org> on behalf of Petarr Jones <petarrjo...@outlook.com> Sent: 01 October 2019 02:57 To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; mico...@gmail.com <mico...@gmail.com> Subject: Re: [SR-Users] BLF 'NOTIFY' not working Thanks for your response Daniel. Kamailio is installed on a cloud server (not AWS) and therefore has an internet facing IP address. The phone is in my office so there is NAT happening at that end. I would have thought the NAT traversal would only apply if the server/Kamailio was behind a firewall/router doing some kind of NAT? Regards Petarr ________________________________ From: Daniel-Constantin Mierla <mico...@gmail.com> Sent: 01 October 2019 00:16 To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; Petarr Jones <petarrjo...@outlook.com> Subject: Re: [SR-Users] BLF 'NOTIFY' not working Hello, there can be NOTIFY requests with no body, as the one below has Content-Length 0 -- a matter of what is the call state, it can be a valid one. Regarding the fact that the NOTIFY is not delivered, have you done nat traversal for SUBSCRIBE? I see private address in the R-URI, so the problem can be in that part. You should do set_contact_alias() for SUBSCRIBE. Cheers, Daniel On 30.09.19 15:16, Petarr Jones wrote: Hi I am using Kamailio 5.2 with the following PRESENCE modules and parameters: loadmodule "presence.so" loadmodule "presence_xml.so" loadmodule "presence_dialoginfo.so" loadmodule "presence_reginfo.so" modparam("presence", "db_url", DBURL) modparam("presence_xml", "db_url", DBURL) modparam("presence_xml", "force_active", 1) modparam("presence_xml", "disable_bla", 0) modparam("presence_xml", "integrated_xcap_server", 1) I have a Yealink T28P phone which has two lines/extensions successfully registered with Kamailio 5.2. When I setup the BLF light to monitor one of the extensions, I get the correct SUBSCRIBE record but the NOTIFY record is sent over and over again until it fails. ----------------------------------------------------------------------------------------------------------- NOTIFY sip:101@192.168.1.123:5062 SIP/2.0 Via: SIP/2.0/UDP 45.45.45.45;branch=z9hG4bKd16c.03b5bc97000000000000000000000000.0 To: <sip:101@45.45.45.45><sip:101@45.45.45.45>;tag=1366853594 From: <sip:104@45.45.45.45><sip:104@45.45.45.45>;tag=a6a1c5f60faecf035a1ae5b6e96e979a-e6c3 CSeq: 2 NOTIFY Call-ID: 594386350@192.168.1.123<mailto:594386350@192.168.1.123> Content-Length: 0 User-Agent: kamailio (5.2.4 (x86_64/linux)) Max-Forwards: 70 Event: dialog Contact: <sip:45.45.45.45:5060;transport=udp><sip:45.45.45.45:5060;transport=udp> ----------------------------------------------------------------------------------------------------------- When I register the phone with Freeswitch instead and run the same test, the NOTIFY works and I get a much longer NOTIFY message ----------------------------------------------------------------------------------------------------------- NOTIFY sip:100@192.168.1.123:5064 SIP/2.0 Via: SIP/2.0/UDP 66.66.66.66;rport;branch=z9hG4bK1mXej9r2605UB Route: <sip:55.55.55.55:5064><sip:55.55.55.55:5064>;transport=udp Max-Forwards: 70 From: <sip:102@66.66.66.66><sip:102@66.66.66.66>;tag=xUoVghM5syHc To: "100" <sip:100@66.66.66.66><sip:100@66.66.66.66>;tag=1720892352 Call-ID: 2583553127@192.168.1.123<mailto:2583553127@192.168.1.123> CSeq: 1178415701 NOTIFY Contact: <sip:102@66.66.66.66:5060><sip:102@66.66.66.66:5060> User-Agent: FreeSWITCH-mod_sofia/1.10.1-release-12-f9990221e6~64bit Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE Supported: timer, path, replaces Event: dialog Allow-Events: talk, hold, conference, presence, as-feature-event, dialog, line-seize, call-info, sla, include-session-description, presence.winfo, message-summary, refer Subscription-State: active;expires=1800 Content-Type: application/dialog-info+xml Content-Length: 149 xml version="1.0"?> dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="0" state="full" entity="sip:102@66.66.66.66"<sip:102@66.66.66.66>> dialog-info> ----------------------------------------------------------------------------------------------------------- Should the message coming from Kamailio contain more data or is that not the issue. Should I be including other modules also? All guidance would be appreciated. _______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users -- Daniel-Constantin Mierla -- www.asipto.com<http://www.asipto.com> www.twitter.com/miconda<http://www.twitter.com/miconda> -- www.linkedin.com/in/miconda<http://www.linkedin.com/in/miconda> Kamailio Advanced Training, Oct 21-23, 2019, Berlin, Germany -- https://asipto.com/u/kat
_______________________________________________ Kamailio (SER) - Users Mailing List sr-users@lists.kamailio.org https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users