Hi, I've been struggling around with my kamailio configuration. I've managed to install kamailio on Ubuntu Server and configured 2 clients, I've registered them in Zoiper to my server. They can call each other, but are unable to talk. There is no audio heard. Ports opened on the router are 20000-30000 UDP and both TCP and UDP for 5060 and 5062. Are these ports correctly opened? Thank you. kamailio.cfg
> #!KAMAILIO > #!define WITH_MYSQL > #!define WITH_AUTH > #!define WITH_USRLOCDB > #!define WITH_ACCDB > # > # Kamailio (OpenSER) SIP Server v5.2 - default configuration script > # - web: https://www.kamailio.org > # - git: https://github.com/kamailio/kamailio > # > # Direct your questions about this file to: <[email protected]> > # > # Refer to the Core CookBook at https://www.kamailio.org/wiki/ > # for an explanation of possible statements, functions and parameters. > # > # Note: the comments can be: > # - lines starting with #, but not the pre-processor directives, > # which start with #!, like #!define, #!ifdef, #!endif, #!else, > #!trydef, > # #!subst, #!substdef, ... > # - lines starting with // > # - blocks enclosed in between /* */ > # > # Several features can be enabled using '#!define WITH_FEATURE' directives: > # > # *** To run in debug mode: > # - define WITH_DEBUG > # > # *** To enable mysql: > # - define WITH_MYSQL > # > # *** To enable authentication execute: > # - enable mysql > # - define WITH_AUTH > # - add users using 'kamctl' > # > # *** To enable IP authentication execute: > # - enable mysql > # - enable authentication > # - define WITH_IPAUTH > # - add IP addresses with group id '1' to 'address' table > # > # *** To enable persistent user location execute: > # - enable mysql > # - define WITH_USRLOCDB > # > # *** To enable presence server execute: > # - enable mysql > # - define WITH_PRESENCE > # > # *** To enable nat traversal execute: > # - define WITH_NAT > # - install RTPProxy: http://www.rtpproxy.org > # - start RTPProxy: > # rtpproxy -l _your_public_ip_ -s udp:localhost:7722 > # - option for NAT SIP OPTIONS keepalives: WITH_NATSIPPING > # > # *** To enable PSTN gateway routing execute: > # - define WITH_PSTN > # - set the value of pstn.gw_ip > # - check route[PSTN] for regexp routing condition > # > # *** To enable database aliases lookup execute: > # - enable mysql > # - define WITH_ALIASDB > # > # *** To enable speed dial lookup execute: > # - enable mysql > # - define WITH_SPEEDDIAL > # > # *** To enable multi-domain support execute: > # - enable mysql > # - define WITH_MULTIDOMAIN > # > # *** To enable TLS support execute: > # - adjust CFGDIR/tls.cfg as needed > # - define WITH_TLS > # > # *** To enable XMLRPC support execute: > # - define WITH_XMLRPC > # - adjust route[XMLRPC] for access policy > # > # *** To enable anti-flood detection execute: > # - adjust pike and htable=>ipban settings as needed (default is > # block if more than 16 requests in 2 seconds and ban for 300 > seconds) > # - define WITH_ANTIFLOOD > # > # *** To block 3XX redirect replies execute: > # - define WITH_BLOCK3XX > # > # *** To block 401 and 407 authentication replies execute: > # - define WITH_BLOCK401407 > # > # *** To enable VoiceMail routing execute: > # - define WITH_VOICEMAIL > # - set the value of voicemail.srv_ip > # - adjust the value of voicemail.srv_port > # > # *** To enhance accounting execute: > # - enable mysql > # - define WITH_ACCDB > # - add following columns to database > #!ifdef ACCDB_COMMENT > ALTER TABLE acc ADD COLUMN src_user VARCHAR(64) NOT NULL DEFAULT ''; > ALTER TABLE acc ADD COLUMN src_domain VARCHAR(128) NOT NULL DEFAULT ''; > ALTER TABLE acc ADD COLUMN src_ip varchar(64) NOT NULL default ''; > ALTER TABLE acc ADD COLUMN dst_ouser VARCHAR(64) NOT NULL DEFAULT ''; > ALTER TABLE acc ADD COLUMN dst_user VARCHAR(64) NOT NULL DEFAULT ''; > ALTER TABLE acc ADD COLUMN dst_domain VARCHAR(128) NOT NULL DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN src_user VARCHAR(64) NOT NULL > DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN src_domain VARCHAR(128) NOT NULL > DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN src_ip varchar(64) NOT NULL default > ''; > ALTER TABLE missed_calls ADD COLUMN dst_ouser VARCHAR(64) NOT NULL > DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN dst_user VARCHAR(64) NOT NULL > DEFAULT ''; > ALTER TABLE missed_calls ADD COLUMN dst_domain VARCHAR(128) NOT NULL > DEFAULT ''; > #!endif > > ####### Include Local Config If Exists ######### > import_file "kamailio-local.cfg" > > ####### Defined Values ######### > > # *** Value defines - IDs used later in config > #!ifdef WITH_MYSQL > # - database URL - used to connect to database server by modules such > # as: auth_db, acc, usrloc, a.s.o. > #!ifndef DBURL > #!define DBURL "mysql://kamailio:kamailiorw@localhost/kamailio" > #!endif > #!endif > #!ifdef WITH_MULTIDOMAIN > # - the value for 'use_domain' parameters > #!define MULTIDOMAIN 1 > #!else > #!define MULTIDOMAIN 0 > #!endif > > # - flags > # FLT_ - per transaction (message) flags > # FLB_ - per branch flags > #!define FLT_ACC 1 > #!define FLT_ACCMISSED 2 > #!define FLT_ACCFAILED 3 > #!define FLT_NATS 5 > > #!define FLB_NATB 6 > #!define FLB_NATSIPPING 7 > > ####### Global Parameters ######### > > ### LOG Levels: 3=DBG, 2=INFO, 1=NOTICE, 0=WARN, -1=ERR > #!ifdef WITH_DEBUG > debug=4 > log_stderror=yes > #!else > debug=2 > log_stderror=no > #!endif > > memdbg=5 > memlog=5 > > log_facility=LOG_LOCAL0 > log_prefix="{$mt $hdr(CSeq) $ci} " > > /* number of SIP routing processes for each UDP socket > * - value inherited by tcp_children and sctp_children when not set > explicitely */ > children=8 > > /* uncomment the next line to disable TCP (default on) */ > # disable_tcp=yes > > /* number of SIP routing processes for all TCP/TLS sockets */ > # tcp_children=8 > > /* uncomment the next line to disable the auto discovery of local aliases > * based on reverse DNS on IPs (default on) */ > # auto_aliases=no > > /* add local domain aliases */ > # alias="sip.mydomain.com" > > /* uncomment and configure the following line if you want Kamailio to > * bind on a specific interface/port/proto (default bind on all available) > */ > # listen=udp:10.0.0.10:5060 > listen=udp:192.168.1.127:5060 advertise PublicIP:5060 > /* life time of TCP connection when there is no traffic > * - a bit higher than registration expires to cope with UA behind NAT */ > tcp_connection_lifetime=3605 > > /* upper limit for TCP connections (it includes the TLS connections) */ > tcp_max_connections=2048 > > #!ifdef WITH_TLS > enable_tls=yes > > /* upper limit for TLS connections */ > tls_max_connections=2048 > #!endif > > ####### Custom Parameters ######### > > /* These parameters can be modified runtime via RPC interface > * - see the documentation of 'cfg_rpc' module. > * > * Format: group.id = value 'desc' description > * Access: $sel(cfg_get.group.id) or @cfg_get.group.id */ > > #!ifdef WITH_PSTN > /* PSTN GW Routing > * > * - pstn.gw_ip: valid IP or hostname as string value, example: > * pstn.gw_ip = "10.0.0.101" desc "My PSTN GW Address" > * > * - by default is empty to avoid misrouting */ > pstn.gw_ip = "" desc "PSTN GW Address" > pstn.gw_port = "" desc "PSTN GW Port" > #!endif > > #!ifdef WITH_VOICEMAIL > /* VoiceMail Routing on offline, busy or no answer > * > * - by default Voicemail server IP is empty to avoid misrouting */ > voicemail.srv_ip = "" desc "VoiceMail IP Address" > voicemail.srv_port = "5060" desc "VoiceMail Port" > #!endif > > ####### Modules Section ######## > > /* set paths to location of modules */ > # mpath="/usr/lib/x86_64-linux-gnu/kamailio/modules/" > > #!ifdef WITH_MYSQL > loadmodule "db_mysql.so" > #!endif > > loadmodule "jsonrpcs.so" > loadmodule "kex.so" > loadmodule "corex.so" > loadmodule "tm.so" > loadmodule "tmx.so" > loadmodule "sl.so" > loadmodule "rr.so" > loadmodule "pv.so" > loadmodule "maxfwd.so" > loadmodule "usrloc.so" > loadmodule "registrar.so" > loadmodule "textops.so" > loadmodule "siputils.so" > loadmodule "xlog.so" > loadmodule "sanity.so" > loadmodule "ctl.so" > loadmodule "cfg_rpc.so" > loadmodule "acc.so" > loadmodule "counters.so" > > #!ifdef WITH_AUTH > loadmodule "auth.so" > loadmodule "auth_db.so" > #!ifdef WITH_IPAUTH > loadmodule "permissions.so" > #!endif > #!endif > > #!ifdef WITH_ALIASDB > loadmodule "alias_db.so" > #!endif > > #!ifdef WITH_SPEEDDIAL > loadmodule "speeddial.so" > #!endif > > #!ifdef WITH_MULTIDOMAIN > loadmodule "domain.so" > #!endif > > #!ifdef WITH_PRESENCE > loadmodule "presence.so" > loadmodule "presence_xml.so" > #!endif > > #!ifdef WITH_NAT > loadmodule "nathelper.so" > loadmodule "rtpproxy.so" > #!endif > > #!ifdef WITH_TLS > loadmodule "tls.so" > #!endif > > #!ifdef WITH_ANTIFLOOD > loadmodule "htable.so" > loadmodule "pike.so" > #!endif > > #!ifdef WITH_XMLRPC > loadmodule "xmlrpc.so" > #!endif > > #!ifdef WITH_DEBUG > loadmodule "debugger.so" > #!endif > > # ----------------- setting module-specific parameters --------------- > > > # ----- jsonrpcs params ----- > modparam("jsonrpcs", "pretty_format", 1) > /* set the path to RPC fifo control file */ > # modparam("jsonrpcs", "fifo_name", "/var/run/kamailio/kamailio_rpc.fifo") > /* set the path to RPC unix socket control file */ > # modparam("jsonrpcs", "dgram_socket", > "/var/run/kamailio/kamailio_rpc.sock") > > # ----- ctl params ----- > /* set the path to RPC unix socket control file */ > # modparam("ctl", "binrpc", "unix:/var/run/kamailio/kamailio_ctl") > > # ----- tm params ----- > # auto-discard branches from previous serial forking leg > modparam("tm", "failure_reply_mode", 3) > # default retransmission timeout: 30sec > modparam("tm", "fr_timer", 30000) > # default invite retransmission timeout after 1xx: 120sec > modparam("tm", "fr_inv_timer", 120000) > > # ----- rr params ----- > # set next param to 1 to add value to ;lr param (helps with some UAs) > modparam("rr", "enable_full_lr", 0) > # do not append from tag to the RR (no need for this script) > modparam("rr", "append_fromtag", 0) > > # ----- registrar params ----- > modparam("registrar", "method_filtering", 1) > /* uncomment the next line to disable parallel forking via location */ > # modparam("registrar", "append_branches", 0) > /* uncomment the next line not to allow more than 10 contacts per AOR */ > # modparam("registrar", "max_contacts", 10) > /* max value for expires of registrations */ > modparam("registrar", "max_expires", 3600) > /* set it to 1 to enable GRUU */ > modparam("registrar", "gruu_enabled", 0) > > # ----- acc params ----- > /* what special events should be accounted ? */ > modparam("acc", "early_media", 0) > modparam("acc", "report_ack", 0) > modparam("acc", "report_cancels", 0) > /* by default ww do not adjust the direct of the sequential requests. > * if you enable this parameter, be sure the enable "append_fromtag" > * in "rr" module */ > modparam("acc", "detect_direction", 0) > /* account triggers (flags) */ > modparam("acc", "log_flag", FLT_ACC) > modparam("acc", "log_missed_flag", FLT_ACCMISSED) > modparam("acc", "log_extra", > "src_user=$fU;src_domain=$fd;src_ip=$si;" > "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") > modparam("acc", "failed_transaction_flag", FLT_ACCFAILED) > /* enhanced DB accounting */ > #!ifdef WITH_ACCDB > modparam("acc", "db_flag", FLT_ACC) > modparam("acc", "db_missed_flag", FLT_ACCMISSED) > modparam("acc", "db_url", DBURL) > modparam("acc", "db_extra", > "src_user=$fU;src_domain=$fd;src_ip=$si;" > "dst_ouser=$tU;dst_user=$rU;dst_domain=$rd") > #!endif > > # ----- usrloc params ----- > /* enable DB persistency for location entries */ > #!ifdef WITH_USRLOCDB > modparam("usrloc", "db_url", DBURL) > modparam("usrloc", "db_mode", 2) > modparam("usrloc", "use_domain", MULTIDOMAIN) > #!endif > > # ----- auth_db params ----- > #!ifdef WITH_AUTH > modparam("auth_db", "db_url", DBURL) > modparam("auth_db", "calculate_ha1", yes) > modparam("auth_db", "password_column", "password") > modparam("auth_db", "load_credentials", "") > modparam("auth_db", "use_domain", MULTIDOMAIN) > > # ----- permissions params ----- > #!ifdef WITH_IPAUTH > modparam("permissions", "db_url", DBURL) > modparam("permissions", "db_mode", 1) > #!endif > > #!endif > > # ----- alias_db params ----- > #!ifdef WITH_ALIASDB > modparam("alias_db", "db_url", DBURL) > modparam("alias_db", "use_domain", MULTIDOMAIN) > #!endif > > # ----- speeddial params ----- > #!ifdef WITH_SPEEDDIAL > modparam("speeddial", "db_url", DBURL) > modparam("speeddial", "use_domain", MULTIDOMAIN) > #!endif > > # ----- domain params ----- > #!ifdef WITH_MULTIDOMAIN > modparam("domain", "db_url", DBURL) > /* register callback to match myself condition with domains list */ > modparam("domain", "register_myself", 1) > #!endif > > #!ifdef WITH_PRESENCE > # ----- presence params ----- > modparam("presence", "db_url", DBURL) > > # ----- presence_xml params ----- > modparam("presence_xml", "db_url", DBURL) > modparam("presence_xml", "force_active", 1) > #!endif > > #!ifdef WITH_NAT > # ----- rtpproxy params ----- > modparam("rtpproxy", "rtpproxy_sock", "udp:127.0.0.1:7722") > > # ----- nathelper params ----- > modparam("nathelper", "natping_interval", 30) > modparam("nathelper", "ping_nated_only", 1) > modparam("nathelper", "sipping_bflag", FLB_NATSIPPING) > modparam("nathelper", "sipping_from", "sip:[email protected]") > > # params needed for NAT traversal in other modules > modparam("nathelper|registrar", "received_avp", "$avp(RECEIVED)") > modparam("usrloc", "nat_bflag", FLB_NATB) > #!endif > > #!ifdef WITH_TLS > # ----- tls params ----- > modparam("tls", "config", "/etc/kamailio/tls.cfg") > #!endif > > #!ifdef WITH_ANTIFLOOD > # ----- pike params ----- > modparam("pike", "sampling_time_unit", 2) > modparam("pike", "reqs_density_per_unit", 16) > modparam("pike", "remove_latency", 4) > > # ----- htable params ----- > /* ip ban htable with autoexpire after 5 minutes */ > modparam("htable", "htable", "ipban=>size=8;autoexpire=300;") > #!endif > > #!ifdef WITH_XMLRPC > # ----- xmlrpc params ----- > modparam("xmlrpc", "route", "XMLRPC"); > modparam("xmlrpc", "url_match", "^/RPC") > #!endif > > #!ifdef WITH_DEBUG > # ----- debugger params ----- > modparam("debugger", "cfgtrace", 1) > modparam("debugger", "log_level_name", "exec") > #!endif > > ####### Routing Logic ######## > > > /* Main SIP request routing logic > * - processing of any incoming SIP request starts with this route > * - note: this is the same as route { ... } */ > request_route { > > # per request initial checks > route(REQINIT); > > # NAT detection > route(NATDETECT); > > # CANCEL processing > if (is_method("CANCEL")) { > if (t_check_trans()) { > route(RELAY); > } > exit; > } > > # handle retransmissions > if (!is_method("ACK")) { > if(t_precheck_trans()) { > t_check_trans(); > exit; > } > t_check_trans(); > } > > # handle requests within SIP dialogs > route(WITHINDLG); > > ### only initial requests (no To tag) > > # authentication > route(AUTH); > > # record routing for dialog forming requests (in case they are routed) > # - remove preloaded route headers > remove_hf("Route"); > if (is_method("INVITE|SUBSCRIBE")) { > record_route(); > } > > # account only INVITEs > if (is_method("INVITE")) { > setflag(FLT_ACC); # do accounting > } > > # dispatch requests to foreign domains > route(SIPOUT); > > ### requests for my local domains > > # handle presence related requests > route(PRESENCE); > > # handle registrations > route(REGISTRAR); > > if ($rU==$null) { > # request with no Username in RURI > sl_send_reply("484","Address Incomplete"); > exit; > } > > # dispatch destinations to PSTN > route(PSTN); > > # user location service > route(LOCATION); > } > > # Wrapper for relaying requests > route[RELAY] { > > # enable additional event routes for forwarded requests > # - serial forking, RTP relaying handling, a.s.o. > if (is_method("INVITE|BYE|SUBSCRIBE|UPDATE")) { > if(!t_is_set("branch_route")) t_on_branch("MANAGE_BRANCH"); > } > if (is_method("INVITE|SUBSCRIBE|UPDATE")) { > if(!t_is_set("onreply_route")) t_on_reply("MANAGE_REPLY"); > } > if (is_method("INVITE")) { > if(!t_is_set("failure_route")) t_on_failure("MANAGE_FAILURE"); > } > > if (!t_relay()) { > sl_reply_error(); > } > exit; > } > > # Per SIP request initial checks > route[REQINIT] { > #!ifdef WITH_ANTIFLOOD > # flood detection from same IP and traffic ban for a while > # be sure you exclude checking trusted peers, such as pstn gateways > # - local host excluded (e.g., loop to self) > if(src_ip!=myself) { > if($sht(ipban=>$si)!=$null) { > # ip is already blocked > xdbg("request from blocked IP - $rm from $fu (IP:$si:$sp)\n"); > exit; > } > if (!pike_check_req()) { > xlog("L_ALERT","ALERT: pike blocking $rm from $fu (IP:$si:$sp)\n"); > $sht(ipban=>$si) = 1; > exit; > } > } > #!endif > if($ua =~ "friendly-scanner|sipcli|VaxSIPUserAgent") { > # silent drop for scanners - uncomment next line if want to reply > # sl_send_reply("200", "OK"); > exit; > } > > if (!mf_process_maxfwd_header("10")) { > sl_send_reply("483","Too Many Hops"); > exit; > } > > if(is_method("OPTIONS") && uri==myself && $rU==$null) { > sl_send_reply("200","Keepalive"); > exit; > } > > if(!sanity_check("17895", "7")) { > xlog("Malformed SIP message from $si:$sp\n"); > exit; > } > } > > # Handle requests within SIP dialogs > route[WITHINDLG] { > if (!has_totag()) return; > > # sequential request withing a dialog should > # take the path determined by record-routing > if (loose_route()) { > route(DLGURI); > if (is_method("BYE")) { > setflag(FLT_ACC); # do accounting ... > setflag(FLT_ACCFAILED); # ... even if the transaction fails > } else if ( is_method("ACK") ) { > # ACK is forwarded statelessly > route(NATMANAGE); > } else if ( is_method("NOTIFY") ) { > # Add Record-Route for in-dialog NOTIFY as per RFC 6665. > record_route(); > } > route(RELAY); > exit; > } > > if (is_method("SUBSCRIBE") && uri == myself) { > # in-dialog subscribe requests > route(PRESENCE); > exit; > } > if ( is_method("ACK") ) { > if ( t_check_trans() ) { > # no loose-route, but stateful ACK; > # must be an ACK after a 487 > # or e.g. 404 from upstream server > route(RELAY); > exit; > } else { > # ACK without matching transaction ... ignore and discard > exit; > } > } > sl_send_reply("404","Not here"); > exit; > } > > # Handle SIP registrations > route[REGISTRAR] { > if (!is_method("REGISTER")) return; > > if(isflagset(FLT_NATS)) { > setbflag(FLB_NATB); > #!ifdef WITH_NATSIPPING > # do SIP NAT pinging > setbflag(FLB_NATSIPPING); > #!endif > } > if (!save("location")) { > sl_reply_error(); > } > exit; > } > > # User location service > route[LOCATION] { > > #!ifdef WITH_SPEEDDIAL > # search for short dialing - 2-digit extension > if($rU=~"^[0-9][0-9]$") { > if(sd_lookup("speed_dial")) { > route(SIPOUT); > } > } > #!endif > > #!ifdef WITH_ALIASDB > # search in DB-based aliases > if(alias_db_lookup("dbaliases")) { > route(SIPOUT); > } > #!endif > > $avp(oexten) = $rU; > if (!lookup("location")) { > $var(rc) = $rc; > route(TOVOICEMAIL); > t_newtran(); > switch ($var(rc)) { > case -1: > case -3: > send_reply("404", "Not Found"); > exit; > case -2: > send_reply("405", "Method Not Allowed"); > exit; > } > } > > # when routing via usrloc, log the missed calls also > if (is_method("INVITE")) { > setflag(FLT_ACCMISSED); > } > > route(RELAY); > exit; > } > > # Presence server processing > route[PRESENCE] { > if(!is_method("PUBLISH|SUBSCRIBE")) return; > > if(is_method("SUBSCRIBE") && $hdr(Event)=="message-summary") { > route(TOVOICEMAIL); > # returns here if no voicemail server is configured > sl_send_reply("404", "No voicemail service"); > exit; > } > > #!ifdef WITH_PRESENCE > if (!t_newtran()) { > sl_reply_error(); > exit; > } > > if(is_method("PUBLISH")) { > handle_publish(); > t_release(); > } else if(is_method("SUBSCRIBE")) { > handle_subscribe(); > t_release(); > } > exit; > #!endif > > # if presence enabled, this part will not be executed > if (is_method("PUBLISH") || $rU==$null) { > sl_send_reply("404", "Not here"); > exit; > } > return; > } > > # IP authorization and user authentication > route[AUTH] { > #!ifdef WITH_AUTH > > #!ifdef WITH_IPAUTH > if((!is_method("REGISTER")) && allow_source_address()) { > # source IP allowed > return; > } > #!endif > > if (is_method("REGISTER") || from_uri==myself) { > # authenticate requests > if (!auth_check("$fd", "subscriber", "1")) { > auth_challenge("$fd", "0"); > exit; > } > # user authenticated - remove auth header > if(!is_method("REGISTER|PUBLISH")) > consume_credentials(); > } > # if caller is not local subscriber, then check if it calls > # a local destination, otherwise deny, not an open relay here > if (from_uri!=myself && uri!=myself) { > sl_send_reply("403","Not relaying"); > exit; > } > > #!else > > # authentication not enabled - do not relay at all to foreign networks > if(uri!=myself) { > sl_send_reply("403","Not relaying"); > exit; > } > > #!endif > return; > } > > # Caller NAT detection > route[NATDETECT] { > #!ifdef WITH_NAT > force_rport(); > if (nat_uac_test("19")) { > if (is_method("REGISTER")) { > fix_nated_register(); > } else { > if(is_first_hop()) { > set_contact_alias(); > } > } > setflag(FLT_NATS); > } > #!endif > return; > } > > # RTPProxy control and signaling updates for NAT traversal > route[NATMANAGE] { > #!ifdef WITH_NAT > if (is_request()) { > if(has_totag()) { > if(check_route_param("nat=yes")) { > setbflag(FLB_NATB); > } > } > } > if (!(isflagset(FLT_NATS) || isbflagset(FLB_NATB))) return; > > if(nat_uac_test("8")) { > rtpproxy_manage("co"); > } else { > rtpproxy_manage("cor"); > } > > if (is_request()) { > if (!has_totag()) { > if(t_is_branch_route()) { > add_rr_param(";nat=yes"); > } > } > } > if (is_reply()) { > if(isbflagset(FLB_NATB)) { > if(is_first_hop()) > set_contact_alias(); > } > } > #!endif > return; > } > > # URI update for dialog requests > route[DLGURI] { > #!ifdef WITH_NAT > if(!isdsturiset()) { > handle_ruri_alias(); > } > #!endif > return; > } > > # Routing to foreign domains > route[SIPOUT] { > if (uri==myself) return; > > append_hf("P-hint: outbound\r\n"); > route(RELAY); > exit; > } > > # PSTN GW routing > route[PSTN] { > #!ifdef WITH_PSTN > # check if PSTN GW IP is defined > if (strempty($sel(cfg_get.pstn.gw_ip))) { > xlog("SCRIPT: PSTN routing enabled but pstn.gw_ip not defined\n"); > return; > } > > # route to PSTN dialed numbers starting with '+' or '00' > # (international format) > # - update the condition to match your dialing rules for PSTN routing > if(!($rU=~"^(\+|00)[1-9][0-9]{3,20}$")) return; > > # only local users allowed to call > if(from_uri!=myself) { > sl_send_reply("403", "Not Allowed"); > exit; > } > > # normalize target number for pstn gateway > # - convert leading 00 to + > if (starts_with("$rU", "00")) { > strip(2); > prefix("+"); > } > > if (strempty($sel(cfg_get.pstn.gw_port))) { > $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip); > } else { > $ru = "sip:" + $rU + "@" + $sel(cfg_get.pstn.gw_ip) + ":" > + $sel(cfg_get.pstn.gw_port); > } > > route(RELAY); > exit; > #!endif > > return; > } > > # XMLRPC routing > #!ifdef WITH_XMLRPC > route[XMLRPC] { > # allow XMLRPC from localhost > if ((method=="POST" || method=="GET") > && (src_ip==127.0.0.1)) { > # close connection only for xmlrpclib user agents (there is a bug in > # xmlrpclib: it waits for EOF before interpreting the response). > if ($hdr(User-Agent) =~ "xmlrpclib") > set_reply_close(); > set_reply_no_connect(); > dispatch_rpc(); > exit; > } > send_reply("403", "Forbidden"); > exit; > } > #!endif > > # Routing to voicemail server > route[TOVOICEMAIL] { > #!ifdef WITH_VOICEMAIL > if(!is_method("INVITE|SUBSCRIBE")) return; > > # check if VoiceMail server IP is defined > if (strempty($sel(cfg_get.voicemail.srv_ip))) { > xlog("SCRIPT: VoiceMail routing enabled but IP not defined\n"); > return; > } > if(is_method("INVITE")) { > if($avp(oexten)==$null) return; > > $ru = "sip:" + $avp(oexten) + "@" + $sel(cfg_get.voicemail.srv_ip) > + ":" + $sel(cfg_get.voicemail.srv_port); > } else { > if($rU==$null) return; > > $ru = "sip:" + $rU + "@" + $sel(cfg_get.voicemail.srv_ip) > + ":" + $sel(cfg_get.voicemail.srv_port); > } > route(RELAY); > exit; > #!endif > > return; > } > > # Manage outgoing branches > branch_route[MANAGE_BRANCH] { > xdbg("new branch [$T_branch_idx] to $ru\n"); > route(NATMANAGE); > } > > # Manage incoming replies > onreply_route[MANAGE_REPLY] { > xdbg("incoming reply\n"); > if(status=~"[12][0-9][0-9]") { > route(NATMANAGE); > } > } > > # Manage failure routing cases > failure_route[MANAGE_FAILURE] { > route(NATMANAGE); > > if (t_is_canceled()) exit; > > #!ifdef WITH_BLOCK3XX > # block call redirect based on 3xx replies. > if (t_check_status("3[0-9][0-9]")) { > t_reply("404","Not found"); > exit; > } > #!endif > > #!ifdef WITH_BLOCK401407 > # block call redirect based on 401, 407 replies. > if (t_check_status("401|407")) { > t_reply("404","Not found"); > exit; > } > #!endif > > #!ifdef WITH_VOICEMAIL > # serial forking > # - route to voicemail on busy or no answer (timeout) > if (t_check_status("486|408")) { > $du = $null; > route(TOVOICEMAIL); > exit; > } > #!endif > } > # The Kamailio configuration file for the control tools. # # Here you can set variables used in the kamctl and kamdbctl setup # scripts. Per default all variables here are commented out, the control tools # will use their internal default values. ## your SIP domain SIP_DOMAIN=192.168.1.127 ## chrooted directory # $CHROOT_DIR="/path/to/chrooted/directory" ## database type: MYSQL, PGSQL, ORACLE, DB_BERKELEY, DBTEXT, or SQLITE # by default none is loaded # # If you want to setup a database with kamdbctl, you must at least specify # this parameter. DBENGINE=MYSQL ## database host DBHOST=localhost ## database port DBPORT=3306 ## database name (for ORACLE this is TNS name) DBNAME=kamailio # database path used by dbtext, db_berkeley or sqlite # DB_PATH="/usr/local/etc/kamailio/dbtext" ## database read/write user DBRWUSER="kamailio" ## password for database read/write user DBRWPW="kamailiorw" ## database read only user DBROUSER="kamailioro" ## password for database read only user DBROPW="kamailioro" ## database access host (from where is kamctl used) # DBACCESSHOST=192.168.0.1 ## database super user (for ORACLE this is 'scheme-creator' user) # DBROOTUSER="root" ## password for database super user ## - important: this is insecure, targeting the use only for automatic testing ## - known to work for: mysql # DBROOTPW="dbrootpw" ## database character set (used by MySQL when creating database) #CHARSET="latin1" ## user name column # USERCOL="username" # SQL definitions # If you change this definitions here, then you must change them # in db/schema/entities.xml too. # FIXME # FOREVER="2030-05-28 21:32:15" # DEFAULT_Q="1.0" # Program to calculate a message-digest fingerprint # MD5="md5sum" # awk tool # AWK="awk" # gdb tool # GDB="gdb" # If you use a system with a grep and egrep that is not 100% gnu grep compatible, # e.g. solaris, install the gnu grep (ggrep) and specify this below. # # grep tool # GREP="grep" # egrep tool # EGREP="egrep" # sed tool # SED="sed" # tail tool # LAST_LINE="tail -n 1" # expr tool # EXPR="expr" # Describe what additional tables to install. Valid values for the variables # below are yes/no/ask. With ask (default) it will interactively ask the user # for an answer, while yes/no allow for automated, unassisted installs. # # If to install tables for the modules in the EXTRA_MODULES variable. # INSTALL_EXTRA_TABLES=ask # If to install presence related tables. # INSTALL_PRESENCE_TABLES=ask # If to install uid modules related tables. # INSTALL_DBUID_TABLES=ask # Define what module tables should be installed. # If you use the postgres database and want to change the installed tables, then you # must also adjust the STANDARD_TABLES or EXTRA_TABLES variable accordingly in the # kamdbctl.base script. # Kamailio standard modules # STANDARD_MODULES="standard acc lcr domain group permissions registrar usrloc msilo # alias_db uri_db speeddial avpops auth_db pdt dialog dispatcher # dialplan" # Kamailio extra modules # EXTRA_MODULES="imc cpl siptrace domainpolicy carrierroute userblacklist htable purple sca" ## type of aliases used: DB - database aliases; UL - usrloc aliases ## - default: none ALIASES_TYPE="DB" ## control engine: RPCFIFO ## - default RPCFIFO CTLENGINE="RPCFIFO" ## path to FIFO file for engine RPCFIFO RPCFIFOPATH="/var/run/kamailio/kamailio_rpc.fifo" ## check ACL names; default on (1); off (0) # VERIFY_ACL=1 ## ACL names - if VERIFY_ACL is set, only the ACL names from below list ## are accepted # ACL_GROUPS="local ld int voicemail free-pstn" ## check if user exists (used by some commands such as acl); ## - default on (1); off (0) # VERIFY_USER=1 ## verbose - debug purposes - default '0' VERBOSE=1 ## do (1) or don't (0) store plaintext passwords ## in the subscriber table - default '1' # STORE_PLAINTEXT_PW=0 ## Kamailio START Options ## PID file path - default is: /var/run/kamailio/kamailio.pid PID_FILE=/var/run/kamailio/kamailio.pid ## Extra start options - default is: not set # example: start Kamailio with 64MB share memory: STARTOPTIONS="-m 64" # STARTOPTIONS= >
_______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
