> I *shouldn’t need this if the pbx was saving received and rport params as a result of add_path_received().
You don't need to alias the Contact (for registration) in the intermediary proxy on the way to the non-colocated Registrar. Adding path should suffice. > Can anyone explain why these two functions conflict? I don't know, may be devs can tell. Personally, I prefer leaving the keepalive mechanism altogether to the Registrar for better control and granularity. Regards, --Sergiu On Thu, Apr 2, 2020 at 12:48 PM Daniel W. Graham <[email protected]> wrote: > I was able to fix all issues, but have one partially lingering. > > > > For register only, if I apply: set_contact_alias() with nat_keepalive(), > keepalives are not sent. Removing set_contact_alias() fixes this. > > > > I *shouldn’t need this if the pbx was saving received and rport params as > a result of add_path_received(). > > > > Can anyone explain why these two functions conflict? > > > > Test scenario - > > # Doesn’t result in register keepalive – > > > > route[NATDETECT] { > > force_rport(); > set_contact_alias(); # removal of this enables keepalive > nat_keepalive(); > return; > } > > > > I’ve tested this with and without calls to handle_ruri_alias() elsewhere > in cfg script with same result. > > > > -dan > > > > *From: *sr-users <[email protected]> on behalf of > Sergiu Pojoga <[email protected]> > *Reply-To: *"Kamailio (SER) - Users Mailing List" < > [email protected]> > *Date: *Wednesday, April 1, 2020 at 8:58 AM > *To: *"Kamailio (SER) - Users Mailing List" <[email protected]> > *Subject: *Re: [SR-Users] nathelper without usrloc > > > > Nothing else comes to mind based on info provided. May be you can send > some sip traffic captures and elaborate? > > > > Regards, > > --Sergiu > > > > On Tue, Mar 31, 2020 at 10:29 PM Daniel W. Graham <[email protected]> > wrote: > > Thanks, yeah I had already changed that, but registration works with > either. I’m not asking for a solution, just looking for suggestions on > anything that needs attention, so I appreciate your pointers. > > > > -dan > > On Mar 31, 2020, at 8:55 PM, Sergiu Pojoga <[email protected]> wrote: > > > > Oh and almost forgot - try *add_path_received()* instead of add_path() > > > > Good luck! > > > > On Tue, Mar 31, 2020 at 8:48 PM Sergiu Pojoga <[email protected]> wrote: > > A lot of things may not be 'right' here, unfortunately your question is > too broad to answer and too little info, the topology is indeed non-default > and I doubt someone will present you with a final solution (there's > business support, if you're looking for that). > > > > Otherwise, if I were to just throw a guess: > > - try fix_nated_register() (instead of set_contact_alias) just for > Register method on the way to the registrar > > - in the Registrar, make sure the Contact's Path address is correct > > > > Cheers, > > --Sergiu > > > > On Tue, Mar 31, 2020 at 7:34 PM Daniel W. Graham <[email protected]> wrote: > > It did help, I read that a couple times already but something is still not > right, and its only because of the decoupling of the registrar. I need to > do more debugging and see if Im loosing the flag value. Hoping something > sticks out that someone sees and can point me in the right direction. > > -dan > > On Mar 31, 2020, at 7:15 PM, Alex Balashov <[email protected]> > wrote: > > > > Daniel, > > > > Might this article be of aid? > > > > > http://www.evaristesys.com/blog/server-side-nat-traversal-with-kamailio-the-definitive-guide/ > > > > -- Alex > > > >> On Tue, Mar 31, 2020 at 11:12:23PM +0000, Daniel W. Graham wrote: > >> > >> It does but doesn't work as well as kamailio, and since the proxy is > the entry point. > >> > >> The biggest issue here isnt the keepalive, as I did have that working. > The main issue is the routing of messages, utilizing set_contact_alias and > handle_ruri_alias, as Ive been unable to get ack and bye messages to make > it past the proxy. I’m assuming these functions are not being used at the > right locations or I need to rely on another mechanism to accomplish it. I > also question my use of the PBX flag and the natmanage logic. > >> > >> -dan > >> > >> On Mar 31, 2020, at 7:01 PM, Sergiu Pojoga <[email protected]> wrote: > >> > >> > >> Hi Daniel, > >> > >> From what you are describing, my understanding is that the Registrar is > the PBX, kamailio is acting as an edge proxy. If so, doesn't the > PBX/registrar have NAT traversal/keepalive mechanisms of its own? > >> > >> Regards, > >> --Sergiu > >> > >> On Tue, Mar 31, 2020 at 1:55 PM Daniel W. Graham <[email protected] > <mailto:[email protected]>> wrote: > >> I’ve been missing with this for a while and seem to be missing > something. Any suggestions on what is missing here? > >> > >> Trying to use set_contact_alias() and handle_ruri_alias() from > nathelper module and nat_keepalive from nat_traversal module, without > registrar. > >> > >> I had register keepalive working, that has since broke. When register > keepalive was working, I was able to place call in either direction but ACK > and BYE was not being routed past kamailio. > >> > >> Registrations are forwarded to the PBX using add_path() and is working. > >> > >> Also not included below is the routing to the PBX, that is just setting > $du and t_relay, and is also working. > >> > >> Topology is: UA1 -> NAT -> kamailio -> PBX -> UA2 > >> > >> Using default config file as the example, modified with above changes. > I also removed RTP config as that is a non-issue. > >> > >> request_route { > >> …… > >> # FLAG MESSAGES FROM PBX > >> setflag(FLT_PBX); > >> route(NATDETECT); > >> …… > >> > >> route[NATDETECT] { > >> if (nat_uac_test("19")) { > >> force_rport(); > >> set_contact_alias(); > >> nat_keepalive(); > >> } > >> return; > >> } > >> > >> route[WITHINDLG] { > >> if (!has_totag()) return; > >> if (loose_route()) { > >> route(DLGURI); > >> } else if ( is_method("ACK") ) { > >> route(NATMANAGE); > >> } else if ( is_method("NOTIFY") ) { > >> record_route(); > >> } > >> route(RELAY); > >> exit; > >> } > >> > >> if (is_method("SUBSCRIBE") && uri == myself) { > >> route(PRESENCE); > >> exit; > >> } > >> if ( is_method("ACK") ) { > >> if ( t_check_trans() ) { > >> route(RELAY); > >> exit; > >> } else { > >> exit; > >> } > >> } > >> sl_send_reply("404","Not here"); > >> exit; > >> } > >> > >> route[NATMANAGE] { > >> if(isflagset(FLT_PBX)) { > >> handle_ruri_alias(); > >> } > >> if(!isflagset(FLT_PBX)) { > >> set_contact_alias(); > >> } return; > >> } > >> > >> route[DLGURI] { > >> if(!isdsturiset()) { > >> handle_ruri_alias(); > >> } > >> return; > >> } > >> > >> branch_route[MANAGE_BRANCH] { > >> route(NATMANAGE); > >> } > >> > >> onreply_route[MANAGE_REPLY] { > >> if(status=~"[12][0-9][0-9]") { > >> route(NATMANAGE); > >> } > >> } > >> failure_route[MANAGE_FAILURE] { > >> route(NATMANAGE); > >> > >> if (t_is_canceled()) exit; > >> > >> > >> -dan > >> > >> _______________________________________________ > >> Kamailio (SER) - Users Mailing List > >> [email protected]<mailto:[email protected]> > >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > >> _______________________________________________ > >> Kamailio (SER) - Users Mailing List > >> [email protected] > >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > > >> _______________________________________________ > >> Kamailio (SER) - Users Mailing List > >> [email protected] > >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > > > > > -- > > Alex Balashov | Principal | Evariste Systems LLC > > > > Tel: +1-706-510-6800 / +1-800-250-5920 (toll-free) > > Web: http://www.evaristesys.com/, http://www.csrpswitch.com/ > > > > _______________________________________________ > > Kamailio (SER) - Users Mailing List > > [email protected] > > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > _______________________________________________ > Kamailio (SER) - Users Mailing List > [email protected] > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > _______________________________________________ > Kamailio (SER) - Users Mailing List > [email protected] > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > _______________________________________________ > Kamailio (SER) - Users Mailing List > [email protected] > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > _______________________________________________ > Kamailio (SER) - Users Mailing List > [email protected] > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >
_______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
