Hi, I have my kamailio ims with NAT and rtpproxy enabled. When i make a call from outside , rtp packets is not going.
Could you please tell me how to configure NAT to get rtp packets in pcscf . On Fri, Apr 17, 2020 at 4:30 PM David Villasmil < [email protected]> wrote: > It doesn’t make a lot of sense to see looping calls “connected”. If they > connect, then they’re not looping, unless there is some counter somewhere > that answers the call when it sees a loop. > > That’s very weird. > > Use sngrep and trace on ALL interfaces. > > On Fri, 17 Apr 2020 at 11:46, Pavithra M <[email protected]> wrote: > >> Hi, >> In Wireshark , I couldn't able to see the looping packets .In debug logs >> of pcscf , I am able to see the looping occurs . But how then the call gets >> connected . That's where I am struck . >> >> On Fri, Apr 17, 2020, 4:11 PM David Villasmil < >> [email protected]> wrote: >> >>> You need to trace sip. There’s a loop somewhere. Use tshark (wireshark) >>> or sngrep or ngrep, or some similar network tracing tool. >>> >>> On Fri, 17 Apr 2020 at 11:34, Pavithra M <[email protected]> >>> wrote: >>> >>>> Hi , >>>> >>>> I am getting the call connected and got 200 ok from the client . But >>>> the INVITE packet goes multiple times between terminating pcscf and s-cscf >>>> and gives too many hops error .Even After that call goes perfectly fine >>>> with 200 ok message. >>>> What would be the reason . I am not getting any errors in my logs with >>>> debug log level 6 . >>>> >>>> Kindly tell me what could be the issue . >>>> >>>> >>>> >>>> >>>> On Thu, Apr 16, 2020, 2:16 PM David Villasmil < >>>> [email protected]> wrote: >>>> >>>>> That usually happens when you don’t set a next hop, or destination >>>>> where the packet should go, so the packet of forwarded to the same >>>>> destination, which is the proxy again. >>>>> >>>>> On Thu, 16 Apr 2020 at 06:56, Pavithra M <[email protected]> >>>>> wrote: >>>>> >>>>>> Hi, >>>>>> >>>>>> I have enabled all debug logs and i traced it and I found that as you >>>>>> said it is keep on looping the invite in pcscf instead of going to other >>>>>> UE >>>>>> . I couldn't able to find the reason.Can you please give me some input on >>>>>> this. >>>>>> >>>>>> Debug logs of pcscf : >>>>>> 0#015#012Via: SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.c9499ad5ce252a99a36ad8b9b70f04d4.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.a00d9260e4373806e691bfa2828ab215.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.6ab08c40989814cf3726b826bdef39d2.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.e650088370f5d61c0d902d1a40fc1252.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.44a3f1c7026e2d42810722ae5c4bf942.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.54030b75c055258251ec7e6980c78c74.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.9a08d87ec59a03501dcd55413ce046eb.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.f36a9dba7b795e3b96df4bb6b480a688.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.b49469c77e102314d82036734a413360.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.221403deba39c28c50f332a8fde22646.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.77f89368e68665c1e3ffdc1d1bea7bab.0#015#012Via: >>>>>> SIP/2.0/UDP 10.45.6.179:4060 >>>>>> ;branch=z9hG4bK7014.2e5981568975ea5c81876a9dded1bc08.0# >>>>>> 015#012Via: SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.19809abdb9c351fdce7e25f51e8c1754.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.ad73d18d15b6c9da96e13156a84d5522.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.fcb5555d6a683215aa989fb4254abd62.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.244b467757383234c76b1c66f98ddfe8.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.b2c353ef1d637907359822c64cb81b2a.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.d22dceb1af0320cfc769f94e0214a313.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.f5e9b7f9b209c82971ae1017b9ad7d1e.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.0f2c98bc92cc799fdce0a4090b626021.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.aa8a07d89f83a26cefd74e4770aef63c.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.94c376a77d066ffe113e84465f5f5311.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.2202e658b1d8b801b14ec432bae7fabe.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.55f7d6a5d9d2a9d064cf1c6683f12eca.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.6870e53f3bc573f140d1728401dd43ae.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.a84d83df8646a75ee0d3605dcacb45ad.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.486b6fb0d17077e20f8375188a8bee75.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.bc0321f98578ab09ad615b634c4c83cd.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.9b26fda9326632abf7bdb32a33d03ab2.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.060fa4afc70848b34ede46705b90f7cb.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.56134adb7c492f7a4f03b36dfbf713f5.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.f9ccc5e81175283c9b4b56f4a2252c0f.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.3c231176b0e95b8121637df41b504f18.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.95bd5b0e0bf8c2bda906a751816a9876.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.87e0fd0a1bd044147d22052d27e07527.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.73:4080;branch=z9hG4bK7014.0a319c71a9a26c8afa77713d6d4ecfed.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.79:4070;branch=z9hG4bK7014.1442d975c0a393f232020916a6fbfc15.1#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.73:4080;branch=z9hG4bK7014.e35a84678ec61f7cefa8cdacb6ba92d9.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.179:4060;branch=z9hG4bK7014.cc99617f0c0f5088f45e203f6a58dd57.0#015#012Via: >>>>>> SIP/2.0/UDP >>>>>> 10.45.6.174:36029;received=10.45.6.174;branch=z9hG4bK-524287-1---c856c42a33d1e959;rport=36029#015#012To: >>>>>> <sip:[email protected]>;tag=8409f602ccf3f3f0da6ebceab6ff6336.aa5bd74f#015#012From: >>>>>> <sip:[email protected];transport=UDP>;tag=cdbaae3f#015#012Call-ID: >>>>>> I-58e6z5tN3aDpmdzq1oVA..#015#012CSeq: 1 INVITE#015#012Server: TelcoSuite >>>>>> Proxy-CSCF#015#012Content-Length: 0 >>>>>> >>>>>> As you see here , continuously invite is going on looping in >>>>>> 10.45.6.179 IP which is pcscf. What could be the reason .. Kindly do the >>>>>> needful. >>>>>> >>>>>> On Wed, Apr 15, 2020, 2:19 PM David Villasmil < >>>>>> [email protected]> wrote: >>>>>> >>>>>>> You should be tracing, you’re probably not, otherwise you would see >>>>>>> the server is probably forwarding the INVITE to itself (removing one hop >>>>>>> every time as it must) and thus creating a loop. >>>>>>> >>>>>>> On Wed, 15 Apr 2020 at 09:42, Pavithra M <[email protected]> >>>>>>> wrote: >>>>>>> >>>>>>>> Hi , >>>>>>>> Yes , I have tried uncommenting that part . It is actually checking >>>>>>>> for hostname (sip.example.com:5060) in my scscf node. I am not >>>>>>>> sure why it is looking for sip.example.com instead of >>>>>>>> scscf.sip.example.com:4080 >>>>>>>> >>>>>>>> I have added one more alias in my scscf.cfg file .Now Domain not >>>>>>>> served issue has gone. >>>>>>>> After that I am facing 483 Too Many Hops Error. >>>>>>>> >>>>>>>> I have added scscf debug logs. >>>>>>>> >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/mem/q_malloc.c:482]: qm_free(): qm_free(0x7fc57b362010, >>>>>>>> 0x7fc57b514138), called from ims_registrar_scscf: lookup.c: lookup(225) >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/mem/q_malloc.c:526]: qm_free(): freeing frag. 0x7fc57b514100 >>>>>>>> alloc'ed >>>>>>>> from ims_registrar_scscf: lookup.c: lookup(103) >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[FINAL_TERM] >>>>>>>> c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=1041 a=16 n=if >>>>>>>> * Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/socket_info.c:628]: grep_sock_info(): checking if host==us: >>>>>>>> 10==10 && >>>>>>>> [10.45.6.75] == [10.45.6.73]* >>>>>>>> * Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/socket_info.c:635]: grep_sock_info(): checking if port 4080 >>>>>>>> (advertise 0) matches port 32347* >>>>>>>> * Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/forward.c:412]: check_self(): host != me* >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[FINAL_TERM] >>>>>>>> c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=1050 a=5 n=route >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[apply_privacy] >>>>>>>> c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=821 a=16 n=if >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[apply_privacy] >>>>>>>> c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=818 a=25 n=is_present_hf >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: ERROR: *** >>>>>>>> cfgtrace:request_route=[FINAL_TERM] >>>>>>>> c=[/etc/kamailio/scscf/kamailio.cfg] >>>>>>>> l=1052 a=24 n=t_relay >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: tm >>>>>>>> [t_lookup.c:1328]: t_newtran(): msg (0x7fc57b502a70) id=2/7139 global >>>>>>>> id=2/7139 T start=(nil) >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: tm >>>>>>>> [t_lookup.c:497]: t_lookup_request(): start searching: hash=38849, >>>>>>>> isACK=0 >>>>>>>> * Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: tm >>>>>>>> [t_lookup.c:455]: matching_3261(): RFC3261 transaction matching failed >>>>>>>> - >>>>>>>> via branch [z9hG4bK1c79.03e4ec0c2ca15f1aa14c067b33a29f10.1]* >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: tm >>>>>>>> [t_lookup.c:675]: t_lookup_request(): no transaction found >>>>>>>> Apr 15 13:59:12 tel-VirtualBox kamailio[7139]: DEBUG: <core> >>>>>>>> [core/mem/q_malloc.c:374]: qm_malloc(): qm_malloc(0x7fc57478b000, 5720) >>>>>>>> called from tm: h_table.c: build_cell(330) >>>>>>>> >>>>>>>> I am facing host is not me error . Here 10.45.6.73 -> scscf and >>>>>>>> 10.45.6.75 -> UE (bob user) >>>>>>>> I am not sure what alias it is asking for . Kindly help. >>>>>>>> >>>>>>>> On Wed, Apr 15, 2020 at 1:36 PM Pafel <[email protected]> wrote: >>>>>>>> >>>>>>>>> Hi, >>>>>>>>> >>>>>>>>> Most likely this is because of the change. Revert back the changes >>>>>>>>> (uncomment the section I told you), turn on debug in scscf.cfg, >>>>>>>>> restart all >>>>>>>>> nodes and test once again. Then have a look on the scscf logs. >>>>>>>>> >>>>>>>>> Regards, >>>>>>>>> Pavel Siderov >>>>>>>>> _______________________________________________ >>>>>>>>> Kamailio (SER) - Development Mailing List >>>>>>>>> [email protected] >>>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Kamailio (SER) - Development Mailing List >>>>>>>> [email protected] >>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>>>>> >>>>>>> -- >>>>>>> Regards, >>>>>>> >>>>>>> David Villasmil >>>>>>> email: [email protected] >>>>>>> phone: +34669448337 >>>>>>> _______________________________________________ >>>>>>> Kamailio (SER) - Development Mailing List >>>>>>> [email protected] >>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>>>> >>>>>> _______________________________________________ >>>>>> Kamailio (SER) - Development Mailing List >>>>>> [email protected] >>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>>> >>>>> -- >>>>> Regards, >>>>> >>>>> David Villasmil >>>>> email: [email protected] >>>>> phone: +34669448337 >>>>> _______________________________________________ >>>>> Kamailio (SER) - Development Mailing List >>>>> [email protected] >>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Development Mailing List >>>> [email protected] >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>>> >>> -- >>> Regards, >>> >>> David Villasmil >>> email: [email protected] >>> phone: +34669448337 >>> _______________________________________________ >>> Kamailio (SER) - Development Mailing List >>> [email protected] >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >>> >> _______________________________________________ >> Kamailio (SER) - Development Mailing List >> [email protected] >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >> > -- > Regards, > > David Villasmil > email: [email protected] > phone: +34669448337 > _______________________________________________ > Kamailio (SER) - Development Mailing List > [email protected] > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-dev >
_______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
