Hi David, In SDP , what need to be checked . I am not much clear in your reply . Kindly elaborate.
Thanks On Thu, May 14, 2020 at 4:55 PM David Villasmil < [email protected]> wrote: > Also check the SDPs and make sure you get the internal up of rtpproxy on > the internal side, and the external on the external side. > > On Thu, 14 May 2020 at 12:18, supreeth herle <[email protected]> > wrote: > >> Can you explain some more when you mean by "RTP alone is not coming."? >> And, how are you checking/verifying that? >> >> Regards, >> Supreeth >> >> On Thu, 14 May 2020 at 13:12, Pavithra Mohanraja <[email protected]> >> wrote: >> >>> Hi , >>> >>> Yes I have configured as you mentioned only . In my pcscf only i have >>> rtpproxy also configured. >>> Floating IP i have given in listen address also as >>> listen = 10.40.10.3:4060 advertise 10.45.4.22:4060 >>> >>> 10.40.10.3 - private ip >>> 10.45.4.22 - floating ip >>> Still RTP alone is not coming. >>> >>> Is it the only way of configuring NAT ? >>> >>> Thanks. >>> >>> On Thu, May 14, 2020 at 4:37 PM supreeth herle <[email protected]> >>> wrote: >>> >>>> Hello Pavithra, >>>> >>>> Have you tried advertising the floating IP of the VM running RTPProxy >>>> as follows? >>>> >>>> Edit /etc/default/rtpproxy file as follows: >>>> >>>> # Additional options that are passed to the daemon. >>>> EXTRA_OPTS="-l 172.24.15.30 -d DBUG:LOG_LOCAL0" >>>> >>>> here, "-l <PUBLIC_IP>" >>>> >>>> Hope it helps. >>>> >>>> Regards, >>>> Supreeth >>>> >>>> On Thu, 14 May 2020 at 13:01, Pavithra Mohanraja < >>>> [email protected]> wrote: >>>> >>>>> Hi , >>>>> >>>>> Could anybody please give me the approach how to configure NAT in >>>>> kamailio IMS. >>>>> >>>>> I have installed kamailio IMS in openstack environment which has >>>>> private ips for all four vms (each component in one vm). pcscf has one >>>>> floating IP attached. I have enabled "WITH_NAT" and configured rtpproxy . >>>>> >>>>> when i make a call from outside of openstack using 2 zoiper clients >>>>> with outbound proxy keeping floating ip of pcscf, I am getting 200 ok with >>>>> all SIP packets correctly flowing but there is no RTP Packet. >>>>> >>>>> When i try the same within openstack environment without using public >>>>> ip, I am getting RTP Packets. >>>>> >>>>> Kindly tell me the procedure of NAT Enablement or do i need to do >>>>> anything other than this. >>>>> >>>>> Kindly help because i am stuck with this for long time. >>>>> >>>>> >>>>> Thanks. >>>>> _______________________________________________ >>>>> Kamailio (SER) - Users Mailing List >>>>> [email protected] >>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>> >>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing List >>>> [email protected] >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>> >>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> [email protected] >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> [email protected] >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> > -- > Regards, > > David Villasmil > email: [email protected] > phone: +34669448337 > _______________________________________________ > Kamailio (SER) - Users Mailing List > [email protected] > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >
_______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
