Hi all, I've been assigned a task to investigate why hepic doesn't generate MOS scores ever since we changed the kamailio interface MTU from 9001 -> 1500.
During my investigation, this is what I have found out so far: - Putting MTU back to 9001 removes this condition where no MOS was generated. - I did a tcpdump of port 9063 which is the port used to send data to Hepic capture server and saw it reports packets are fragmented: 3:48:55.895505 IP (tos 0x68, ttl 64, id 38049, offset 0, flags [+], proto UDP (17), length 1500) 206.81.181.40.5060 > 10.225.88.239.9063: SIP 13:48:55.896451 IP (tos 0x68, ttl 64, id 38050, offset 0, flags [+], proto UDP (17), length 1500) 206.81.181.40.5060 > 10.225.88.239.9063: SIP - Hepic support also caused by using 1500 MTU on the interface. - I tried using the following core parameters to see if they could remedy this issue but didn't seem to work: ## MTU related core settings udp4_raw=-1 udp4_raw_mtu=1500 I can't seem to find any parameters in the siptrace module that controls fragmentation of the packets to Hepic. Any suggestions on how else to troubleshoot this? Thanks. -- Andy Chen Sr. Telephony Lead Engineer achen@ <[email protected]>fuze.com -- *Confidentiality Notice: The information contained in this e-mail and any attachments may be confidential. If you are not an intended recipient, you are hereby notified that any dissemination, distribution or copying of this e-mail is strictly prohibited. If you have received this e-mail in error, please notify the sender and permanently delete the e-mail and any attachments immediately. You should not retain, copy or use this e-mail or any attachment for any purpose, nor disclose all or any part of the contents to any other person. Thank you.*
_______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
