you can set the DB as Master-Master, and add a virtual IP for the DB Cluster. Point your Asterisk boxes to connect to that VIP, and you're good to go.
*Sérgio Charrua* *www.voip.pt <http://www.voip.pt/>* Tel.: +351 <callto:+351+91+104+12+66>21 130 71 77 Email : *[email protected] <[email protected]>* This message and any files or documents attached are strictly confidential or otherwise legally protected. It is intended only for the individual or entity named. If you are not the named addressee or have received this email in error, please inform the sender immediately, delete it from your system and do not copy or disclose it or its contents or use it for any purpose. Please also note that transmission cannot be guaranteed to be secure or error-free. On Wed, Jul 22, 2020 at 1:22 PM Aristeidis Tsitras <[email protected]> wrote: > So, in order to have it working i need 2 realtime asterisk that are in a > master-slave setup and have users created in both. Am i correct? > > Στις Τετ, 22 Ιουλ 2020, 11:36 ο χρήστης Sergio Charrua < > [email protected]> έγραψε: > >> Try to install SNGREP command line application. It greatly helped me to >> understand what was going on in kamailio. >> Install it in your Kamailio server, and run it. You will then be able to >> see and understand all SIP requests and responses. >> >> Also, as Daniel said, the SIP requests between client->kamailio->asterisk >> must be kept the same at all times when trying to register. Additionally, >> install Asterisk with Realtime module, and share the same SIP users across >> your asterisk boxes, by the means of a DB. This is the best approach. >> >> Hope this helps, >> >> *Sérgio Charrua* >> >> >> *www.voip.pt <http://www.voip.pt/>* >> Tel.: +351 <callto:+351+91+104+12+66>21 130 71 77 >> >> Email : *[email protected] <[email protected]>* >> >> This message and any files or documents attached are strictly >> confidential or otherwise legally protected. >> >> It is intended only for the individual or entity named. If you are not >> the named addressee or have received this email in error, please inform the >> sender immediately, delete it from your system and do not copy or disclose >> it or its contents or use it for any purpose. Please also note that >> transmission cannot be guaranteed to be secure or error-free. >> >> >> >> >> >> >> >> >> On Wed, Jul 22, 2020 at 6:19 AM Aristeidis Tsitras <[email protected]> >> wrote: >> >>> I experience something really strange when i change the dispatcher list >>> to have the same priority both of the servers. I am getting 401 >>> (unauthorised) to the extensions trying to register. Even though they in >>> asterisk they seem to be registered, the debug shows 401. Not able to call >>> from one extension to the other. >>> here is the console error: >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> *<--- Transmitting (NAT) to 192.168.0.99:5060 <http://192.168.0.99:5060> >>> --->SIP/2.0 401 UnauthorizedVia: SIP/2.0/UDP >>> 192.168.0.99;branch=z9hG4bKe78c.2793112e87a37f021cda7a582ba8c703.0;received=192.168.0.99;rport=5060Via: >>> SIP/2.0/UDP >>> 192.168.0.117:5060;received=192.168.0.117;branch=z9hG4bK823694525;rport=5060From: >>> <sip:[email protected] <sip%[email protected]>>;tag=580308996To: >>> <sip:[email protected] <sip%[email protected]>>;tag=as4657cc95Call-ID: >>> [email protected]: 2005 REGISTERServer: Asterisk PBX >>> 11.25.3Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, >>> INFO, PUBLISH, MESSAGESupported: replaces, timerWWW-Authenticate: Digest >>> algorithm=MD5, realm="asterisk", nonce="73fd892f", >>> stale=trueContent-Length: 0* >>> >>> >>> >>> On the other hand if i change the priority to 0 & 1 the servers >>> respectively, then no errors in asterisk console and they can call between >>> each other. >>> This is really odd. >>> >>> >>> >>> Στις Τρί, 21 Ιουλ 2020 στις 3:32 μ.μ., ο/η Jurijs Ivolga < >>> [email protected]> έγραψε: >>> >>>> Ah, >>>> >>>> I see the problem, just change list file in following way: >>>> >>>> 1 sip:192.168.0.100:5080 0 0 maxload=20 >>>> 1 sip:192.168.0.101:5080 0 0 maxload=20 >>>> >>>> Jurijs >>>> >>>> >>>> On Tue, Jul 21, 2020 at 3:28 PM Jurijs Ivolga <[email protected]> >>>> wrote: >>>> >>>>> Hi Aristedis, >>>>> >>>>> Sorry, indeed you have module parameters. >>>>> >>>>> When one asterisk is down what you see when you run: >>>>> >>>>> kamcmd dispatcher.list >>>>> >>>>> Jurijs >>>>> >>>>> >>>>> On Tue, Jul 21, 2020 at 3:19 PM Aristeidis Tsitras <[email protected]> >>>>> wrote: >>>>> >>>>>> i know that there is something wrong, but i can not figure it out. >>>>>> Especially for the modparam settings that Mr Jurijs Ivolga is proposing, >>>>>> I >>>>>> already had them. it is the kamailio.cfg that I originally attached. >>>>>> >>>>>> Unfortunately I did not manage to find anything in the parameters >>>>>> that will solve the problem as proposed by Villasmil and Semenov. I have >>>>>> given a try on changes but nothing good came up. >>>>>> >>>>>> >>>>>> >>>>>> Στις Τρί, 21 Ιουλ 2020 στις 2:48 μ.μ., ο/η Arsen Semenov < >>>>>> [email protected]> έγραψε: >>>>>> >>>>>>> Hi Aristeidis, >>>>>>> David is right, first would be good to check the status of the >>>>>>> destinations. >>>>>>> >>>>>>> In your configuration there are couple of things to have in mind: >>>>>>> need to set correct flag param >>>>>>> >>>>>>> https://kamailio.org/docs/modules/5.5.x/modules/dispatcher.html#dispatcher.p.flags >>>>>>> select the algorithm used to select the destination (ds_select_dst) >>>>>>> and have a faulure_route where the next destination will be tried in >>>>>>> case >>>>>>> first is down. >>>>>>> You can find the examples in the module doc. >>>>>>> >>>>>>> Cheers, >>>>>>> >>>>>>> On Tue, Jul 21, 2020 at 4:11 PM Aristeidis Tsitras < >>>>>>> [email protected]> wrote: >>>>>>> >>>>>>>> I have a Kamailio and 2 asterisk servers. All users are created in >>>>>>>> both of the asterisk servers. I am forwarding the registration to >>>>>>>> asterisk. >>>>>>>> The problem is that it is always used on only one server from the list. >>>>>>>> Even if one goes to shutdown, then there is not any registration sent >>>>>>>> to >>>>>>>> the available server. Even if *some *of the extensions can be seen >>>>>>>> registered in both of the asterisk's, if the secondary goes down, then >>>>>>>> there are no services for the phones. >>>>>>>> >>>>>>>> I am attaching the kamailio.cfg. My dispatch list is: >>>>>>>> 1 sip:192.168.0.100:5080 0 0 maxload=20 >>>>>>>> 2 sip:192.168.0.101:5080 0 0 maxload=20 >>>>>>>> >>>>>>>> In both of the asterisk servers i am using sip.conf to create users >>>>>>>> and s sip trunk for the Kamailio. Nothing special about it. >>>>>>>> >>>>>>>> I am looking to find what is wrong with my config and i cannot >>>>>>>> loadbalance/failover to the asterisk servers. >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> Kamailio (SER) - Users Mailing List >>>>>>>> [email protected] >>>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>>> >>>>>>> >>>>>>> >>>>>>> -- >>>>>>> Arsen Semenov >>>>>>> >>>>>>> _______________________________________________ >>>>>>> Kamailio (SER) - Users Mailing List >>>>>>> [email protected] >>>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>>> >>>>>> _______________________________________________ >>>>>> Kamailio (SER) - Users Mailing List >>>>>> [email protected] >>>>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>>>> >>>>> _______________________________________________ >>>> Kamailio (SER) - Users Mailing List >>>> [email protected] >>>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>>> >>> _______________________________________________ >>> Kamailio (SER) - Users Mailing List >>> [email protected] >>> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> >> _______________________________________________ >> Kamailio (SER) - Users Mailing List >> [email protected] >> https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> > _______________________________________________ > Kamailio (SER) - Users Mailing List > [email protected] > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >
_______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
