I believe you need to add the table yourself like: https://github.com/sipwise/rtpengine
# this only needs to be one once after system (re-) boot modprobe xt_RTPENGINE iptables -I INPUT -p udp -j RTPENGINE --id 0 ip6tables -I INPUT -p udp -j RTPENGINE --id 0 # ensure that the table we want to use doesn't exist - usually needed after a daemon # restart, otherwise will error echo 'del 0' > /proc/rtpengine/control # start daemon /usr/sbin/rtpengine --table=0 --interface=10.64.73.31 --interface=2001:db8::4f3:3d \ --listen-ng=127.0.0.1:2223 --tos=184 --pidfile=/run/rtpengine.pid --no-fallback Regards, David Villasmil email: [email protected] phone: +34669448337 On Wed, Oct 14, 2020 at 5:06 PM Pavithra Mohanraja <[email protected]> wrote: > Hi, > I tried to setup rtpengine to make my sip clients communicate through > proxy following https://open5gs.org/open5gs/docs/tutorial/02-VoLTE-setup/ > > I started sip communication since the service was running and saw that the > RTP packets go to exposed rtp interface instead of other sip client. But i > don't receive packets from the other end. > > When analyzed I noticed the rtp-engine daemon gives a few errors. > *modprobe: FATAL: Module xt_RTPENGINE not found in directory > /lib/modules/4.15.0-118-generic* > > > *iptables: No chain/target/match by that name.ip6tables: No > chain/target/match by that name. * Starting RTP/media proxy > ngcp-rtpengine-daemon > [1602690253.130392] ERR: FAILED TO CREATE KERNEL TABLE 0 (No such > file or directory), KERNEL FORWARDING DISABLED* > *(Note: *uname -r gives 4.15.0-118-generic and /lib/modules/ has only > 4.15.0-115-generic*)* > > Please help me with this issue. Thanks in Advance. > > Regards, > Pavithra > _______________________________________________ > Kamailio (SER) - Users Mailing List > [email protected] > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >
_______________________________________________ Kamailio (SER) - Users Mailing List [email protected] https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
