Yes they're on separate i/f each, Kamailio works like SIP "NAT/firewall box" between LAN and internet.
Check a port in $fs, 5060 or 5070, or show your cfg with $fs пт, 1 июл. 2022 г. в 15:19, Алексей Якимкин <[email protected]>: > Hello, > > Are you ips (LAN_IP and WAN_IP) on sepparate interfaces? > > I use add_path for Register requests. It insert header Path: > <sip:10.130.0.23:5070;lr> > > My pbx calls to User-Agent throught 10.130.0.23:5070. INVITE(from > kamailio) go out to internet from 10.130.0.23:5070 > > This line "$fs = «udp:10.130.0.23:5060»;" don`t work, It produces an > error: > (pv [pv_branch.c:62]: pv_get_branchx_helper(): error accessing branch [0]) > > > ср, 29 июн. 2022 г. в 18:55, ZZ Wave <[email protected]>: > >> I use this with NATed Kamailio and Asterisk for "transparent" >> registrations: >> >> if (is_method("REGISTER")) { >> add_path(); >> } >> if ($Ri=="LAN_IP") { >> $fs="udp:WAN_IP:5060"; >> } else { >> $fs="udp:LAN_IP:5060"; >> } >> >> AFAIK FreeSwitch supports Path as well but Yate doesn't >> >> ср, 29 июн. 2022 г. в 12:25, Алексей Якимкин <[email protected]>: >> >>> Hello, >>> >>> I have kamailio in local network behind NAT. Kamailio have one >>> interface eth1 with ip 10.130.0.23 >>> >>> UserAgent - (internet) - (178.0.0.169)router_with_NAT - (LAN) - >>> kamailio+rtpproxy - pbx >>> >>> I made two listeners: >>> listen=udp:10.130.0.23:5070 #to pbx in lan (I don`t want to put via >>> header with 178.0.0.169) >>> listen=udp:10.130.0.23:5060 advertise 178.0.0.169:5060 #to internet >>> (UserAgent need to get via header with 178.0.0.169 ) >>> >>> >>> mhomed = 1 # I think It not useful for my case >>> >>> UserAgent send Register and Invite to 178.0.0.169:5060, Kamailio get it >>> on udp:10.130.0.23:5060 >>> >>> Kamailio Relay it to udp:10.130.0.23:5070 >>> >>> My pbx get requests from udp:10.130.0.23:5070 with via header >>> 10.130.0.23 >>> >>> Responses to UserAgent go from udp:10.130.0.23:5060 with >>> via 178.0.0.169 >>> >>> >>> In RELAY block: >>> if ($Ru == «udp:10.130.0.23:5070») { >>> #set_send_socket(«udp:10.130.0.23:5060»); >>> $fs = «udp:10.130.0.23:5060»; >>> #force_send_socket(«udp:10.130.0.23:5060»); >>> } else { >>> #set_send_socket(«udp:10.130.0.23:5070»); >>> $fs = «udp:10.130.0.23:5070»; >>> } >>> #$fs = «udp:10.130.0.23:5070»; >>> if (!t_relay()) { >>> sl_reply_error(); >>> } >>> >>> route[REGISTRAR] { >>> >>> if ($rd == "mydomain.ru" || $rd == "mydomain2.ru") { >>> >>> set_send_socket("udp:10.130.0.23:5070"); >>> >>> } >>> >>> } >>> >>> >>> It works for requests from UserAgent to PBX. But INVITE from my pbx to >>> UserAgent goes only through udp:10.130.0.23:5070 , Kamailio realy it >>> to internet from udp:10.130.0.23:5070 >>> >>> I get error in syslog: (pv [pv_branch.c:62]: pv_get_branchx_helper(): >>> error accessing branch [0]) >>> >>> I tried set_send_socket(«udp:10.130.0.23:5070»); and $fs = >>> «udp:10.130.0.23:5070»; >>> >>> Why I can`t relay outgoing requests to internet through another socket? >>> >>> >>> -- >>> >>> Best regards, >>> Alex >>> >>> __________________________________________________________ >>> Kamailio - Users Mailing List - Non Commercial Discussions >>> * [email protected] >>> Important: keep the mailing list in the recipients, do not reply only to >>> the sender! >>> Edit mailing list options or unsubscribe: >>> * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >>> >> __________________________________________________________ >> Kamailio - Users Mailing List - Non Commercial Discussions >> * [email protected] >> Important: keep the mailing list in the recipients, do not reply only to >> the sender! >> Edit mailing list options or unsubscribe: >> * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >> > > > -- > С уважением, > Якимкин Алексей > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions > * [email protected] > Important: keep the mailing list in the recipients, do not reply only to > the sender! > Edit mailing list options or unsubscribe: > * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >
__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions * [email protected] Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: * https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
