Hi Daniel-Constantin,
I just found this parameter too.
I set it now to 10 seconds, but for example a 30 second expire is only
executed every 40 seconds.
It looks, that I'm not able to set the same entry again inside of the
event_route.
Maybe it is deleted after the event_route is executed.
There should be a check afterards if the entry is still expired before
deleting it.
I found an ugly solution:
I use 2 identical htables and toggle between them:
event_route[htable:expired:userpush1] {
xinfo("[event_route] userpush1 Record expired $shtrecord(key) =>
$shtrecord(value)");
$sht(userpush2=>$shtrecord(key)) = $shtrecord(value);
}
event_route[htable:expired:userpush2] {
xinfo("[event_route] userpush2 Record expired $shtrecord(key) =>
$shtrecord(value)");
$sht(userpush1=>$shtrecord(key)) = $shtrecord(value);
}
It works, but it is ugly.
Thank you for your response.
Bernd
Am 21.11.2022 um 11:34 schrieb Daniel-Constantin Mierla:
Hello,
check the docs of the module, there is a modparam to set the timer
interval, which by default is 20 secods.
Then, to troubleshoot, run with debug=3 and watch the log messages for
hints of what happens. Also, dump the htable via rpc to see its content.
Cheers,
Daniel
On 21.11.22 08:50, Bernd Krueger-Knauber wrote:
Hi members,
I run into a problemm with htable.
For user push notifications I need a loop.
So I did the following for a first test:
modparam("htable", "htable", "user=>size=3;autoexpire=5")
...
event_route[htable:mod-init] {
xinfo("htable init");
$sht(user=>testkey) = "testvalue";
}
event_route[htable:expired:user] {
xinfo("Record expired $shtrecord(key) => $shtrecord(value)");
$sht(user=>$shtrecord(key)) = $shtrecord(value);
}
I see the htable init, and I reach Record expired, but only once.
The 'new' entry
$sht(user=>$shtrecord(key)) = $shtrecord(value);
seams not to be re-added, because I never reach the expired event again.
I expected to see cyclic expired events.
Also strange:
expire is set to 5 seconds I get:
Nov 21 08:34:50 xxx /usr/sbin/kamailio[254662]: INFO: <script>: htable
init
...
Nov 21 08:35:10 xxx /usr/sbin/kamailio[254671]: INFO: <script>: Record
expired testkey => testvalue
If I'm right, this are 20 seconds and not 5.
Any ideas what's wrong?
Best regards
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
sr-users@lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only
to the sender!
Edit mailing list options or unsubscribe:
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
--
EDNT GmbH
Werner-von-Siemens-Strasse 7
64625 Bensheim
www.ednt.de
Registergericht: Darmstadt
Registernummer: 24972
Geschäftsführerin: Kerstin Knapp
__________________________________________________________
Kamailio - Users Mailing List - Non Commercial Discussions
sr-users@lists.kamailio.org
Important: keep the mailing list in the recipients, do not reply only to the
sender!
Edit mailing list options or unsubscribe:
https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users
