Hello, Thank you for your reply. I checked the versions and they look good. xt_RTPENGINE is 11.1.1.3 and the daemon is 11.1.1.3-1~bpo11+1. Looking at /proc/rtpengine/0/list I see the packet and byte counters incrementing normally with 0 errors. In wireshark, capturing on any, I see the stream coming in on the private network interface but nothing going out through the public network interface. Everything is good until 5 seconds into the call when the kernelization happens.
Michel Pelletier On Mon, Dec 12, 2022 at 2:19 PM Richard Fuchs <rfu...@sipwise.com> wrote: > On 12/12/2022 14.53, [EXT] Michel Pelletier wrote: > > I am proxying all RTP through RTPEngine. Everything works fine until > > about 5 seconds into the call, when rtpengine enters kernelization, > > after which all RTP forwarding ceases. I've checked the required > > iptables entries, and all looks good. > > Inspect /proc/rtpengine/0/list while a call is running, in particular > paying attention to the packet and byte counters. > > Also double check that the version of the rtpengine daemon matches the > version of the kernel module (and that the module has been reloaded if > there have been any upgrades - `dmesg` or `kern.log` are good places to > check that). > > Cheers > > > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions > sr-users@lists.kamailio.org > Important: keep the mailing list in the recipients, do not reply only to > the sender! > Edit mailing list options or unsubscribe: > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users >
__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions sr-users@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe: https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users