Hello, you can use different methods, a common way is to use the htable module fort that. If you are fine with a dialog-stateful proxy, you can also just use the dialog module for that – for a counter per dialog.
Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: Unai Rodriguez <u...@rodr.org> Sent: Wednesday, December 21, 2022 12:42 PM To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org>; Henning Westerholt <h...@gilawa.com> Subject: RE: [SR-Users] How to have Kamailio retry backends I’d like to implement a counter per INVITE. Do I need to use the counters (https://www.kamailio.org/docs/modules/devel/modules/counters.html) module or statistics (https://kamailio.org/docs/modules/devel/modules/statistics.html) module or could someone provide any pointers? Thank you so much With best wishes, Unai Rodriguez On 13 Dec 2022, 18:28 +0100, Henning Westerholt <h...@gilawa.com<mailto:h...@gilawa.com>>, wrote: Hello, regarding limiting the number of gateways retries, you can use different failure routes (e.g. jump from first to second and then stop), you can keep an counter, or probably just rely on ds_next_dst() reaching the end of available gateways in the XAVP (did not checked code). Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: Unai Rodriguez <u...@rodr.org<mailto:u...@rodr.org>> Sent: Tuesday, December 13, 2022 5:32 PM To: Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org>>; Henning Westerholt <h...@gilawa.com<mailto:h...@gilawa.com>> Subject: RE: [SR-Users] How to have Kamailio retry backends Hi Henning/All, After some digging we realized the system was already retrying thanks to this block on kamailio.cfg # Try next destionations in failure route failure_route[RTF_DISPATCH] { if (t_is_canceled()) { exit; } # next DST - only for 500 or local timeout if (t_check_status("500") or (t_branch_timeout() and !t_branch_replied())) { if(ds_next_dst()) { t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } } } How can we control the maximum number of retries? Seems to be infinite at the moment? Or !t_branch_replied()means that each backend can only reply once? Thanks you With best wishes, Unai Rodriguez On 6 Dec 2022, 10:04 +0100, Henning Westerholt <h...@gilawa.com<mailto:h...@gilawa.com>>, wrote: Hello, you can implement this by using a failure_route. There is one example in the dispatcher module configuration how to do it. Cheers, Henning -- Henning Westerholt – https://skalatan.de/blog/ Kamailio services – https://gilawa.com<https://gilawa.com/> From: sr-users <sr-users-boun...@lists.kamailio.org<mailto:sr-users-boun...@lists.kamailio.org>> On Behalf Of Unai Rodriguez Sent: Saturday, December 3, 2022 5:16 PM To: sr-users@lists.kamailio.org<mailto:sr-users@lists.kamailio.org> Subject: [SR-Users] How to have Kamailio retry backends Dear List, We’re using Kamailio to load balance MRCP requests to multiple backend groups with a configuration as follows: # kamailio.cfg ... ... route[DISPATCH] { if($ua=="mrcp_backend_1") { if(!ds_select_dst("1", "4")) { send_reply("404", "No destination"); exit; } } if($ua=="mrcp_backend_2") { if(!ds_select_dst("2", "4")) { send_reply("404", "No destination"); exit; } } xlog("L_DBG", "--- SCRIPT: going to <$ru> via <$du>\n"); t_on_failure("RTF_DISPATCH"); route(RELAY); exit; } ... ... # dispatcher.list 1 sip:mrcp01.server.int:8060;transport=tcp 1 sip:mrcp02.server.int:8060;transport=tcp 2 sip:mrcp03.server.int:8060;transport=tcp 2 sip:mrcp04.server.int:8060;transport=tcp With this configuration, Kamailio load balances the initial SIP INVITE among the MRCP servers. After the INVITE, the service communicates directly to the MRCP servers via SIP (for hanging up the call), MRCPv2 (for sending speech control messages), and RTP (for sending audio). We would like to implement a configurable number of retries, so that if a particular backend times out, Kamailio would retry X times to other backend(s). In short, something equivalent to HAProxy’s retries<https://cbonte.github.io/haproxy-dconv/2.4/configuration.html#4-retries>, but for Kamailio. This probably implies having Kamailio always as part of our communication (not just load balancing the initial SIP INVITE). I haven’t been able to find much information about this, could someone provide some pointers? Thank you so much With best wishes, Unai Rodriguez
__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-le...@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe:
