I changed the open file limit from 1024 to 1048576 and checked that. No changes happened by that. I think its a problem in esxi load support, can it be the problem?
On Mon, Jan 16, 2023 at 9:10 PM mohsen khashei <[email protected]> wrote: > It's probably the matter of Number of Open Files Limit in Linux you can > check it by : > ulimit -Hn > And > ulimit -Sn > And if the number are low you can increase it by: > > sysctl -w fs.file-max=500000 > > And test it again. > > On Mon, Jan 16, 2023, 8:23 PM Mohammad Reza Keshavarzianpoor < > [email protected]> wrote: > >> Hi, >> cpu and ram load on both servers are not high. >> how can I know about your questions answer?( What does tcpdump say? What >> do the interface loss stats say? ) >> >> Thanks for your help >> >> On Mon, Jan 16, 2023 at 6:48 PM Nathan Stratton <[email protected]> >> wrote: >> >>> Most likely it's your hardware or network, I run well over 1k calls with >>> StarTrinity with no loss. Whats the load on the boxes? What does tcpdump >>> say? What do the interface loss stats say? >>> >>> ><> >>> Nathan Stratton >>> Founder, CTO >>> Vocinity, Inc. >>> >>> <https://www.vocinity.com/gabbi> >>> >>> >>> On Mon, Jan 16, 2023 at 9:23 AM Mohammad Reza Keshavarzianpoor < >>> [email protected]> wrote: >>> >>>> Hi, >>>> I've installed last version of kamailio over ubuntu. I need to >>>> broadcast machine calls to destinations. my concurrent call should be >>>> around 300(my pstn channels), so I start calls with cps around 20, because >>>> my calls contains a less than 30 second and if destination answer the call >>>> it will hanged up in less than or equal to 30 seconds. >>>> My problem is: to test my kamailio config, I'm using startrinity sip >>>> tester over an win server 2019 on local network. and it shows about 20% >>>> lost package on rtp and a jitter about 500ms. what should I do? my config >>>> is based on rtp media server module. Is there a complete working sample >>>> config for kamailio with rtp media server module? >>>> I tried rtpproxy and rtp engine in past and the same problem happened. >>>> Thanks for any help you can provide >>>> Best regards >>>> __________________________________________________________ >>>> Kamailio - Users Mailing List - Non Commercial Discussions >>>> To unsubscribe send an email to [email protected] >>>> Important: keep the mailing list in the recipients, do not reply only >>>> to the sender! >>>> Edit mailing list options or unsubscribe: >>>> >>> __________________________________________________________ >>> Kamailio - Users Mailing List - Non Commercial Discussions >>> To unsubscribe send an email to [email protected] >>> Important: keep the mailing list in the recipients, do not reply only to >>> the sender! >>> Edit mailing list options or unsubscribe: >>> >> __________________________________________________________ >> Kamailio - Users Mailing List - Non Commercial Discussions >> To unsubscribe send an email to [email protected] >> Important: keep the mailing list in the recipients, do not reply only to >> the sender! >> Edit mailing list options or unsubscribe: >> > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions > To unsubscribe send an email to [email protected] > Important: keep the mailing list in the recipients, do not reply only to > the sender! > Edit mailing list options or unsubscribe: >
__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to [email protected] Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe:
