Hi, I finally resolved my issue, although without ever finding the cause. I am using bare-metal servers from Vultr and I was having the issue with the Debian 11 image that they provide when provisioning the server. An external consultant and myself invested several hours trying to find what could be causing this issue and we were unsuccessful. We tried everything (or so we thought), including sysctl and various network settings, to no avail. As a last resort, I then proceeded to wipe the server and reinstall Debian 11 using the standard Debian network installer in replacement of the image provided by Vultr. The problem magically went away after doing so but I would really like to know the cause.
Cheers, Michel Pelletier On Thu, Mar 2, 2023 at 9:45 PM Tim Bowyer <ti...@timbo.au> wrote: > Hi Everyone, > > > > I’m having the same issue but believe it’s related to my network topology. > > I have multiple carrier-facing NIC’s and an internal NIC on each media > proxy. > > > > Is this configuration supported? > > > > I have the named ‘public / providerA / providerB’ rtpengine interfaces > setup and working correctly – media flows as expected when running > rtpengine *without* the kernel module. > > When kernel module is in use I get a few seconds of 2-way audio initially > before it drops out in one direction usually. > > > > [r...@per01-mtp01.dev.xyz blah]# cat /proc/rtpengine/0/list > > local inet4 203.x.x.x:40000 > > stats: 350880 bytes, 2040 > packets, 0 errors > > RTP payload type 0: 0 > bytes, 0 packets > > RTP payload type 8: 350880 bytes, > 2040 packets > > SSRC in: 65aa31af > > output #0 > > src inet4 10.y.y.y:40000 > > dst inet4 203.x.x.x:39302 > > SSRC out: > > > > I was also looking to find some config to make this working using > firewalld rules, fishing through the Sipwise repos I stumbled across some > firewalld rules as part of their automated builds but didn’t have any luck > with them > > If somebody had some rules I could try would be much appreciated! > > > > Cheers, > > > > Tim > > > > *From:* sr-users <sr-users-boun...@lists.kamailio.org> *On Behalf Of *Michel > Pelletier > *Sent:* Tuesday, 13 December 2022 10:04 PM > *To:* Kamailio (SER) - Users Mailing List <sr-users@lists.kamailio.org> > *Subject:* Re: [SR-Users] Rtpengine: no audio after kernelization. > > > > Hello, > > > > Thank you for your reply. I checked the versions and they look good. > xt_RTPENGINE is 11.1.1.3 and the daemon is 11.1.1.3-1~bpo11+1. Looking at > /proc/rtpengine/0/list I see the packet and byte counters incrementing > normally with 0 errors. In wireshark, capturing on any, I see the stream > coming in on the private network interface but nothing going out through > the public network interface. Everything is good until 5 seconds into the > call when the kernelization happens. > > > Michel Pelletier > > > > > > On Mon, Dec 12, 2022 at 2:19 PM Richard Fuchs <rfu...@sipwise.com> wrote: > > On 12/12/2022 14.53, [EXT] Michel Pelletier wrote: > > I am proxying all RTP through RTPEngine. Everything works fine until > > about 5 seconds into the call, when rtpengine enters kernelization, > > after which all RTP forwarding ceases. I've checked the required > > iptables entries, and all looks good. > > Inspect /proc/rtpengine/0/list while a call is running, in particular > paying attention to the packet and byte counters. > > Also double check that the version of the rtpengine daemon matches the > version of the kernel module (and that the module has been reloaded if > there have been any upgrades - `dmesg` or `kern.log` are good places to > check that). > > Cheers > > > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions > sr-users@lists.kamailio.org > Important: keep the mailing list in the recipients, do not reply only to > the sender! > Edit mailing list options or unsubscribe: > https://lists.kamailio.org/cgi-bin/mailman/listinfo/sr-users > > __________________________________________________________ > Kamailio - Users Mailing List - Non Commercial Discussions > To unsubscribe send an email to sr-users-le...@lists.kamailio.org > Important: keep the mailing list in the recipients, do not reply only to > the sender! > Edit mailing list options or unsubscribe: >
__________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to sr-users-le...@lists.kamailio.org Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe:
