Hi Henning Thanks for your answer, I do not see anything wrong in the SDP, RTP ports are correctly allocated on Invite and 183 session progress.
Regards Le mer. 8 mars 2023 à 08:16, Henning Westerholt <[email protected]> a écrit : > > Hello, > > did not looked into the pcap, but you should try to debug why it uses the > wrong port. Maybe you are adding wrong SDP content to the SIP messages you > route in your setup. If its add wrong SDP, try to debug why this happens. > > Cheers, > > Henning > > -----Original Message----- > From: gui <[email protected]> > Sent: Freitag, 3. März 2023 16:29 > To: [email protected] > Subject: [SR-Users] (no subject) > > Hello > > I have an issue with Rx in my VolTE call Flow. Please refer to picture and > pcap in annex. > I am using same rtp engine at origination and termination. > I am sending rtpmanage for invite and 183 session progress at both > origination and termination. > > My issue is that Rx is not sending for the proper media flow component to > PCRF. > At origination it is considering a media flow between A 50034 and RTPEngine > 49186 (instead of considering RTP Engine Port 49152) At Termination it is > considering a media flow between B 50054 and RTPEngine 49132 (instead of > considering RTP EnginePort 49170) > > Any idea why? __________________________________________________________ Kamailio - Users Mailing List - Non Commercial Discussions To unsubscribe send an email to [email protected] Important: keep the mailing list in the recipients, do not reply only to the sender! Edit mailing list options or unsubscribe:
